Gas chromatography mass spectrometry GC-MS-879
| Model No | GC-87 |
| Flow rate | 1 ~ 1.5 ml / min |
| Maximum flow rate | 10 ml / min |
| Inlet temperature | 450 °C |
| Model No | MS-89 |
| Mass range | 1.5 ~ 1000 amu |
| Ion – source temperature | 100 °C ~ 350 °C |
| GC-MS interface temperature | 450 °C |
Ion chromatograph system LICS-A22
| Type | High pressure and low pulse double plunger tandem advection pump |
| Maximum pressure | 35 MPa (PEEK) |
| Display pressure accuracy | ≤ 0.1 MPa |
| Flow stability | (0.2 to 0.5) ml/ min ≤ 3 % , (0.5 to 1.0) ml/ min ≤ 2 %, > 1.0 ml/ min ≤ 2 % |
| Maximum pressure | 35 MPa |
| Contact material of the rotor | PEEK |
| Control mode | By Stepper motor |
| Power supply | DC 24 V |
| Operating temperature range | Room temperature 20 to 60°C ( 68 to 140°F) |
| Controlling temperature accuracy | ± 0.01°C |
| Allowable deviation of column heater temperature | ± 2°C |
| Temperature stability | ≤ 1°C/ h |
| Plastic flow path | Made up of PEEK material |
| Six way valve | PEEK material pressure 5000 psi, independent automatic collection and flow function |
Ion chromatograph system LICS-A21
| Type | High pressure and low pulse double plunger tandem advection pump |
| Maximum pressure | 35 MPa (PEEK) |
| Pressure display accuracy | ≤ 0.1 MPa |
| Flow stability | (0.2 to 0.5) ml/ min ≤ 3 % (0.5 to 1.0) ml/ min ≤ 2 % > 1.0 ml/ min 2 % |
| Type | Temperature Control and Bipolar Conductivity Detector |
| Detection mode | Bipolar conductivity detection |
| Cell volume | ≤ 0.8 µL |
| Detection range | 0 to 45000 µS/ cm |
| Plastic flow path | Made of PEEK materials |
| Six way Valve | PEEK material, 5000 psi pressure, independent automatic collection and flow function |
Ion chromatograph system LICS-A20
| Type | High pressure and low pulse double plunger tandem advection pump |
| Maximum pressure | 35 MPa (PEEK) |
| Pressure display accuracy | ≤ 0.1 MPa |
| Flow stability | (0.2 to 0.5) ml/ min ≤ 3 % (0.5 to 1.0) ml/ min ≤ 2 % > 1.0 ml/ min 2 % |
| Type | Temperature Control and Bipolar Conductivity Detector |
| Detection mode | Bipolar conductivity detection |
| Cell volume | ≤ 0.8 µL |
| Detection range | 0 to 35000 µS/ cm |
| Plastic flow path | Made of PEEK materials |
| Six way Valve | PEEK material, 5000 psi pressure, independent automatic collection and flow function |
| Inner volume | 300 µl |
| Degassing volume | 7.5 ml |
| Maximum flow rate | 10 ml/ min |
| Degassing efficiency | Degassing 90 % at 1ml/ min |
Labtron Equipment Ltd. enables the customer success through innovation, cGMP manufacturing, comprehensive service offerings, ecological and corporate sustainability.
Popular Products
