Rust Characteristics and Corrosion Tester LRCT-A12 is a multifunctional tester with high performance cost ratio. It is designed and made as per the International Standards ASTM D665 (Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water), ASTM D130 (Test Methods for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test) and ASTM D7671 (Test Methods for Detecting Silver Corrosion from Jet Fuels by the Sliver Strip Test).
| Sample hole | 4 pieces |
| Ambient temperature | Room temperature to 35°C |
| Temperature controlling range | 0 to 100°C |
| Temperature controlling accuracy | ± 1°C |
| Relative humidity | ≤ 85 % |
| Timing range | 1 min to 24 hours |
| Total power consumption | ≤ 1800W |
| Dimensions | 880 × 430 × 960 mm, 590 × 490 × 430 mm |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It is used to determine corrosiveness aviation gasoline, kerosene, turbine oil, vehicle gasoline, tractor fuels, washing solvent, distillate fuels, lubricating oil and other petroleum products.
| Model | Sample hole | Ambient temperature | Temperature controlling range | Temperature controlling accuracy | Relative humidity | Timing range | Total power consumption | Dimensions | Power supply |
| LRCT-A13 | 4 pieces | Room temperature to 35 °C | Room temperature to 100°C | ± 1°C | ≤ 85 % | 1 min to 24 hours | ≤ 1800 W | 580 × 460 × 760 mm | AC 220 V ± 10 %, 50 Hz |
| LRCT-A10 | 2 pieces | 10 to 35°C | Room Temperature to 100°C | ± 0.5°C | ≤ 85 % | - | ≤ 1700 W | 580 × 520 × 810 mm | AC 220 V ± 10 %, 50 Hz |
| LRCT-A11 | 4 pieces | Room temperature to 35°C | 0 to 100°C | ± 1°C | ≤ 85 % | 1 min to 24 hours | ≤ 1800 W | 880 × 430 × 840 mm | AC 220 V ± 10%, 50Hz |
| LRCT-A12 | 4 pieces | Room temperature to 35°C | 0 to 100°C | ± 1°C | ≤ 85 % | 1 min to 24 hours | ≤ 1800W | 880 × 430 × 960 mm, 590 × 490 × 430 mm | AC 220 V ± 10 %, 50 Hz |
