TOC Analyzer LTOC-A11 is designed to determine carbon content in most of samples – Solid, Liquid and Gaseous by digesting it through High Temperature Combustion mode. LTOC-A11 is fully computer-aided equipment which helps in enhancing the performance.
| Measurement Range | 0 - 30000 mg/l |
| Detection Limit | 50 μg/l |
| Digestion Mode | High Temperature Combustion |
| Detector | NDIR |
| Parameters | TC, TIC, TOC, NPOC |
| Gas Requirement | Oxygen/Nitrogen ≥ 99.995 % |
| Application | Liquid Sample, Gas Sample, Solid Sample |
| Repeatability | 0.03 |
| Maximum Salinity | 85 g/l |
| Power | 220 ± 10 V, 50 / 60 Hz, 1 KW |
| Size | 430 x 455 x 440 mm |
| Operation mode] | PC Control |
Existing official analytical methods place ‘Total Organic Carbon’ as the most widely used analyzer to measure carbon amounts in any given sample. Generally, it is used for quality control of drinking water, industrial water, sewage and waste water. It is also known in assisting the validation cleaning procedures of the biotechnology industry, especially clean-in-place (CIP).
Available Range :
Maximum number of Sample : 19 Measurement Range : 0 - 10000 mg/l Measurement Range : 0 - 30000 mg/lRelated Models :
| Model | Measurement Range | Detection Limit | Digestion Mode | Detector | Parameters | Gas Requirement | Application | Repeatability | Maximum Salinity | Power | Size | Operation mode] |
| LATA-A10 | - | - | - | - | - | - | - | - | - | - | - | - |
| LTOC-A10 | 0 - 10000 mg/l | 5 μg/l | Wet chemical oxidation by UV | NDIR | TC, TIC, TOC,NPOC | Nitrogen ≥ 99.995 % | Liquid Sample, Gas Sample | 0.03 | 85 g/l | 220 ± 10 V, 50 / 60 Hz, 1 KW | 430 x 455 x 440 mm | PC Control |
| LTOC-A11 | 0 - 30000 mg/l | 50 μg/l | High Temperature Combustion | NDIR | TC, TIC, TOC, NPOC | Oxygen/Nitrogen ≥ 99.995 % | Liquid Sample, Gas Sample, Solid Sample | 0.03 | 85 g/l | 220 ± 10 V, 50 / 60 Hz, 1 KW | 430 x 455 x 440 mm | PC Control |
