Disintegration tester LDIT-A11

Disintegration tester LDIT-A11

Disintegration tester LDIT-A11 is adopted with high-precision digital electronic sensor, ensures quality precision and accuracy of the water bath temperature without need for calibration. Equipped with two to three sets of basket, conducts independent disintegration experiments. The default setting for lifting time of the basket is 15 mins, can manually set the other time value as per the experimental need.

Available Range :

Number of basket lifting set : 1 set Number of basket lifting set : 3 sets Number of basket lifting set : 2 sets
Number of basket lifting set 2 sets
Lifting frequency of the basket 30 to 32/ min
Lifting distance of basket 55 ± 1 mm
Minimum spacing from screen to bottom of beaker 25 ± 2 mm
Mesh size 2 mm (as per standard configuration )
Automatic time range 5 to 120 min
Work noise < 60 dB
Temperature prefabrication range Room Temperature to 50°C, display resolution: 0.1 °C
Temperature control accuracy ± 0.3°C
Time prefabrication range 1 to 900 min
Time control accuracy 0.5 min
Accuracy of temperature control 37 ± 0.5°C
Dimension (L × W × H) 400 × 320 × 440 mm
Power supply 220 V/50 Hz
Total power 600 W
Gross Weight 20 kg
  • 2 sets of basket with 12 tubes (6 in each basket) Independent driving for each station Microprocessor controlled automation system Even °C temperature maintenance in water bath Transparent organic glass for water bath Increase and decrease splash proof buttons Automatic system for controlling temperature, time, frequency Alternative display for the preset and real time data Auto-diagnose, auto-alarm system for over-temperature

Used for detection of rate of disintegration of solids such as tablets, capsules, pills in required /set (prescriptive) conditions at pharmaceutical industry.

Accessories no. Name Capacity Qty.
1 Beaker 1000 ml 2

Accessories no. Name
1 0.425 mm diameter mesh
2 1 mm diameter mesh
3 Beaker