Plastic Testing Instruments

Labtron Plastic Testing Instruments has a microprocessor-controlled PID system that ensures precise temperature balance for consistent results. These include an inside chamber constructed from durable stainless steel, offering long-lasting reliability. Their test samples retain their physical properties even after aging, ensuring accurate assessments. They have adopted a double-pipe structure for enhanced durability and performance. Our plastic testing instruments effectively determine the anti-impact properties of materials, providing valuable data for material testing and quality control.

Filter

Clear All

Testing Instruments

Impact Speed & Energy (charpy)

Impact energy (Izod)

Resolution of impact energy

Pendulum up angle

Falling Weight Impact Tester LFWIT-A10

Falling Weight Impact Tester LFWIT-A10

Dart Head Mass: 50 to 2000

Mass Increment: 5 g

Impact Height: 1500 mm

Dart Head Quality: A method: R38 ± 1 mm B method: R50 ± 1 mm

Heat Seal Tester LHST-A10

Heat Seal Tester LHST-A10

Heat Sealing Temperature: RT to 300℃

Temperature Control Accuracy: ± 1℃

Heat Sealing Time: 0.01 s to 99.99 h

Heat Sealing Pressure: 0 to 8 kg (0 to 0.8 MPa)

Heat Seal Tester LHST-A11

Heat Seal Tester LHST-A11

Heat Sealing Temperature: RT to 300℃

Temperature Control Accuracy: ± 1℃ (0.1℃ customizable)

Heat Sealing Time: 0.01 s to 99.99 h

Heat Sealing Pressure: 0 to 8 kg (0 to 0.8 MPa)

Pendulum Impact Tester LIPT-A10
Pendulum Impact Tester LIPT-A10

Maximum Impact Energy: 3 J

Minimum Graduation Value: 0.020 J (Option: 0.010 J)

Pendulum Lifting Angle: 90°

Pendulum Swing Radius: 265 mm

Pendulum Impact Tester LIPT-A11
Pendulum Impact Tester LIPT-A11

Impact Energy: Standard: 1 J, 2 J, 3 J Customizable: Up to 5 J

Resolution: 0.001 J

Punch Size: Փ 25.4 mm, Փ 12.7 mm

Sample Clamp Diameter: Փ 60 mm, Փ 89 mm

Melt Flow Indexer LMTF-A10

Melt Flow Indexer LMTF-A10

Temperature Control Range: 0℃ to 450℃

Temperature Resolution: 0.1℃

Temperature Fluctuation: ± 0.2℃

Temperature Uniformity: ± 1℃

Vacuum Leak Tester LVLT-A10

Vacuum Leak Tester LVLT-A10

Vacuum Degree: 0 to slightly less than -90 kPa (conventional barrel)

Vacuum Accuracy: ± 1%

Vacuum Holding Time: 99.99 h

Inlet Pressure: 0.5 to 0.65 MPa

Vacuum Leak Tester LVLT-A11

Vacuum Leak Tester LVLT-A11

Vacuum Degree: 0 to 95 kPa (conventional barrel)

Vacuum Accuracy: ± 1%

Vacuum Holding Time: 0.1 to 60 min

Inlet Pressure: 0.5 to 0.65 MPa

Charpy/ Izod Impact Tester TCI-A10
Charpy/ Izod Impact Tester TCI-A10

Impact Speed & Energy (charpy): 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J

Impact energy (Izod): 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J

Resolution of impact energy: 0.001 J

Pendulum up angle: 160°

Falling Weight Impact Tester TFWT-A10
Falling Weight Impact Tester TFWT-A10

Temperature Range: 10 to 35°C

Maximum Falling Height: 2000 mm

Resolution Of Displacement: 1 mm

Height Error: < ± 2 mm

Falling Weight Impact Tester TFWT-A11

Falling Weight Impact Tester TFWT-A11

Maximum Sample Length: 6 inches (152.4mm)

Test Temperature: 23 ℃ ± 2 ℃

Sample Size Range: 16 mm to 152 mm

Anvil Size: 13 mm steel Plate

Heat sealer THS-A10

Heat sealer THS-A10

Seal temperature: Room temperature -250°C

Control accuracy: ± 0.2°C

Dwell time: 0.1 S to 999.9 S

Dwell pressure: 0.05 to 0.7 MPa

Lasting adhesive tester TLAT-A10

Lasting adhesive tester TLAT-A10

Standard roller: 2000 ± 50 g

Testing stations: 3

Dimension (L*W*H) tester: 320×210×550 mm (3 stations)

Weight for stations: 10 kg (3 stations)

Lasting adhesive tester TLAT-A11
Lasting adhesive tester TLAT-A11

Standard roller: 2000 ± 50 g

Testing stations: 6

Dimension (L*W*H) tester: 650×210×550 mm (6 stations)

Weight for stations: 15 kg (6 stations)

Melt flow Indexer TMFI-A10
Melt flow Indexer TMFI-A10

Measuring range: 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)

Measuring rate: 0.001 S

Temperature range: 50 to 400°C

Temperature precision: ± 0.5°C

Melt flow Indexer TMFI-A11

Melt flow Indexer TMFI-A11

Measuring range: 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)

Measuring rate: 0.001 S

Temperature range: 50 to 400°C

Temperature precision: ± 0.5°C

Oxygen Index Tester TOIT-A10

Oxygen Index Tester TOIT-A10

Resolution: 0.1 % O2

Measuring range: 0 to 100 % O2

Precision: ± 0.4 % O2

Response time: < 10 S

Primary adhesive tester TPAT-A10

Primary adhesive tester TPAT-A10

Inclined adjustable angle: 0 to 40°

Panel width: 120 mm

Test area width: 80 mm

Standard steel balls: 1/32 to 1 inch

HDT and Vicat Testing Machine TVHT-A10
HDT and Vicat Testing Machine TVHT-A10

Structure: Table Type

Maximum Deformation Measurement Range: 1mm (Vicat Test); 0.33mm (Thermal Deformation)

Display: 7-inch Touch Screen

Sample Frame: Manual

Vacuum Leak Tester TVLT-A10
Vacuum Leak Tester TVLT-A10

Vacuum degree: 0 to 90 KPa

Accuracy: 1 % FS

Resolution: 0.1 KPa

Vacuum chamber effective size: 270 × 210 mm


Plastic Testing Instruments :
Falling Weight Impact Tester LFWIT-A10, Heat Seal Tester LHST-A10, Heat Seal Tester LHST-A11, Pendulum Impact Tester LIPT-A10, Pendulum Impact Tester LIPT-A11, Melt Flow Indexer LMTF-A10, Vacuum Leak Tester LVLT-A10, Vacuum Leak Tester LVLT-A11, Charpy/ Izod Impact Tester TCI-A10, Falling Weight Impact Tester TFWT-A10, Falling Weight Impact Tester TFWT-A11, Heat sealer THS-A10, Lasting adhesive tester TLAT-A10, Lasting adhesive tester TLAT-A11, Melt flow Indexer TMFI-A10, Melt flow Indexer TMFI-A11, Oxygen Index Tester TOIT-A10, Primary adhesive tester TPAT-A10, HDT and Vicat Testing Machine TVHT-A10, Vacuum Leak Tester TVLT-A10, and more.

Quick Links : About Us, Contact Us, User Manuals, Career, Terms of Use, Policies, Sitemap, Gallery.

Need a Product

send details for best price quotation

Click
For

Address:Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608

Copyright © 2025 Labtron Equipment Ltd. All rights reserved.