info@labtron.com +44 2080 043608
Water Purification System LWPS-C11

Water Purification System LWPS-C11

Water Purification System LWPS-C11 is top choice of high flux ultrapure water system from tap to ultrapure water, integrating pretreatment, RO and terminal filter into one. Its output ranges up to 90 liters/hour and offers flow rate up to 2 liters/minute (when tank is full). Features with tap water inlet, it can produce second stage RO water and EDI module, center EDI ultrapure water system. The 2nd stage RO water’s conductivity can stay 1 to 5 µs/cm, and the ultrapure water’s resistivity is more absolutely to 18.2 MΩ.cm. It completely meets the highest grades and offers ASTM standards. Designed with 7.0 inch touch LCD display, to detect the quality of 3 way water sensor, 2 way flow sensor ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. It is auto self-flushing of RO membrane function, extend RO membrane life.

Request Quote
Output 2nd stage RO water 90 liters/hour
Output ultrapure water Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality Resistivity (25°C) 18.2 M Ω cm
TOC: < 3ppb
Bacteria: <0.1 cfu/ml
Particle (>0.2 µm): <1/ml
Endotoxin: <0.001EU/ml
RNases: <1pg/ml
DNases: <5pg/ml
EDI Resistivity >10.2 M Ω cm
TOC: < 30ppb
Silicone rejection rate: >99.9 %
RO Water Quality Conductivity 1st stage RO water: Feed water Conductivity ×5 %
Conductivity 2nd stage RO water: 1 to 5 µs/cm
Feed water requirements Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2
Dimension 610 × 585 × 1580 mm 
Power Consumption 480 W
Power Supply AC110 to 240 V, 50/60 Hz
Weight about 75 kg
Standard configuration Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank
  • Water Purification is unique and easy-to-install prefiltration pack system
  • Integrate with EDI module, without softener, chemical regeneration and replacing any DI cartridge
  • Self-maintenance of the reverse osmosis membrane
  • The system recirculates water when the system is not in use in order to maintain water quality
  • Built in 20 liters Pressure Tank and 20 liters plastic pressure water tank
  • Designed with graphic display clearly indicates all parameters
  • 3 doors and easy to replacing cartridge design, convenient to maintain system and replace cartridges
  • RO module with DOWs membrane, ensure long life, stable operation and high desalinization rate
  • Designed with multiple alarm function
  • Offers data storage and RS 232/USB communication port
  • Equipped with range of filters and cartridges are available for the system to match your water requirements of bacteria-free, pyrogen-free or nuclease-free
  • Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
  • Easy to maintain and operate

Water Purification System is used in Molecular biology and life sciences, Animal cells and plant cell culture, Tissue culture, IVF, Electrophoresis, gel analysis, medium preparation etc. across Healthcare, Food & Beverage and Biochemistry microanalysis etc.

Compare Models

Model Output 2nd stage RO water Output ultrapure water Ultrapure Water Quality EDI RO Water Quality Feed water requirements Dimension Power Consumption Power Supply Weight Standard configuration
LWPS-C11 90 liters/hour Up to 2 liters/minute (when tank is full) Resistivity (25°C) 18.2 M Ω cm
TOC: < 3ppb
Bacteria: <0.1 cfu/ml
Particle (>0.2 µm): <1/ml
Endotoxin: <0.001EU/ml
RNases: <1pg/ml
DNases: <5pg/ml
Resistivity >10.2 M Ω cm
TOC: < 30ppb
Silicone rejection rate: >99.9 %
Conductivity 1st stage RO water: Feed water Conductivity ×5 %
Conductivity 2nd stage RO water: 1 to 5 µs/cm
Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2 610 × 585 × 1580 mm  480 W AC110 to 240 V, 50/60 Hz about 75 kg Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank
LWPS-C10 90 liters/hour Up to 2 liters/minute (when tank is full) Resistivity (25°C) 18.2 M Ω cm
TOC: < 3ppb
Bacteria: <0.1 cfu/ml
Particle (>0.2 µm): <1/ml
Endotoxin: <0.001EU/ml
RNases: <1pg/ml
DNases: <5pg/ml
- Conductivity 1st stage RO water: Feed water Conductivity ×5 %
Conductivity 2nd stage RO water: 1 to 5 µs/cm
Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2 610 × 585 × 1580 mm  480 W AC110 to 240 V, 50/60 Hz about 75 kg Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank
LWPS-A10 - - - - - - - - - - -
LWPS-A11 - - - - - - - - - - -

Most Viewed

Customer Enquiry Form

Ask Expert

Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608

Copyright © 2023 Labtron Equipment Ltd. All rights reserved.