Multi parameter water quality analyzer LMWA-A11 is a high quality analyzer with benchtop design, simultaneously measures turbidity, chemical oxygen demand, ammonia and total phosphorous content of water sample. The aviation insulation protective layer present above digestion hole, effectively prevents scalds. The imported heat resistant protective cover ensures the safety and reliability of the experiment.
| COD Measurement Range | 5 to 5000 mg/ L |
| COD Measurement Accuracy |
< 50 mg/ L, ≤ ± 10% > 50 mg/ L, ≤ ± 5% |
| COD Minimum Detection Limit | 0.1 mg/ L |
| COD Measurement Time | 20 minutes |
| COD Repeatability | ≤ ± 5 % |
| Processing Sample Number Per Batch | 12 pcs |
| COD Reactor Digestion Temperature | 165 ± 0.5°C |
| COD Reactor Digestion Time | 10 min |
| COD Reactor Time Setting Switches | 3 pcs |
| Anti-Chlorine Interference | (Cl) < 1000 mg/ L No effect |
| Ammonia Nitrogen Determination Range | 0.02 to 30 mg/ L |
| Ammonia Nitrogen Measurement Accuracy | ≤ ± 10 % |
| Ammonia Nitrogen Minimum Detection Limit | 0.01 mg/ L |
| Ammonia Nitrogen Measurement Time | 10 to 15 minutes |
| Ammonia Nitrogen Repeatability | ≤ ± 5 % |
| Ammonia Nitrogen Reactor Time Setting Switches | 20 pcs |
| Phosphorous Determination Range | 3 pcs |
| Phosphorous Measurement Accuracy | 0.002 to 10 mg/ L |
| Phosphorous minimum detection limit | ≤ ± 5 % |
| Phosphorous measurement time | 0.001 mg/ L |
| Phosphorous Repeatability | 35 to 50 minutes |
| Phosphorous Reactor Temperature | ≤ ± 5 % |
| Phosphorous Reactor Digestion Time | 12 pcs |
| Phosphorous Reactor Time Setting Switches | 120 ± 0.5°C |
| Turbidity Determination Range | 30 min |
| Turbidity Measurement Accuracy | 3 pcs |
| Turbidity Minimum Detection limit | 0.5 to 400 NTU |
| Turbidity Measurement Time | ≤ ± 5 % |
| Turbidity Repeatability | 0.1 NTU |
| Consumables for Colorimetric Measurement | 1 minute |
| Light Source Life | ≤ ± 5 % |
| Optical Stability | Colorimetric tubes and Cuvette |
| No. of Curves | 100000 hours |
| Data Storage | ≤ 0.001 A/ 10 min |
| Display | 56 |
| Interface | 12000 |
| Power Supply | LCD (320 × 240) |
| Dimension (W×D×H) | USB |
| Weight | AC 200 V |
Multi Parameter Water Quality Analyzer is used in water quality testing based on COD, ammonia nitrogen, total phosphorous, and turbidity parameters across plants, laboratories, and industries.
Protective cover
Related Sub-Category
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
