Our water purification system can provide assistance to educational and scientific research centres. They are available with different flow rates. read more
Water Purification System LWPS-A11 mainly consists of two stages of water quality and its feed water is tap water. It follows type III and type I systems. Features pretreatment system, RO system, ultrapure water system conveying unit and control system. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.
| Water quality | Two stage(Type III and type I) |
| Feed water |
Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h |
| Conectivity | <5 μs/cm@25℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| TOC | < 5ppb |
| Bacteria | < 0.1 cfu/ml |
| Endotoxin | < 0.001 EU/ml |
| Particle | ( > 0.22μm) <1/ml |
| Absorbance | (254nm,1cm optical distance) < 0.001 EU/ml |
| Reactive Silica(SiO2) | < 0.01 ppm |
| RNases | < 0.01 ng/ml |
| DNases | < 4 pg/μl |
| Temperature | 5 ℃ ~ 40 ℃ |
| Humidity | 10 % ~ 80 % |
| Water production rate | Type 1 water flow rate: 1-1.5L/min |
| Micro filtration | Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter |
| Power supply | 230 V/50 Hz 150 W |
| Main body Dimension (L × W × H) | 340 × 550 × 530 mm (bench type) |
Used for Medical device injection to human body, DNA/RHA preparation, DNA testing, HPLC (test and analysis of amino acid, penicillin; Organic ingredients), GCMS, ICP, IC, gas chromatography, AAS etc.
Tap water→ 1st stage PP filter (5micron) → 2nd activated carbon filter→3rd softener→ 4th stage PP filter(1micron) → Stage I booster pump→ Stage I reverse osmosis membrane→ Stage II booster pump → Stage II reverse osmosis membrane→ Pure water tank→ pure Water conveying pump→ Type Ⅲ pure water outlet→ UV lamp→ Ultra-purification package → Ultra-purification cartridge →UF→ micro-filter→ Type I ultrapure water outlet
Available Range :
Water Purification System LWPS-C11 : 90 liters/hour Water Purification System LWPS-C10 : 90 liters/hour Water Purification System LWPS-A10 : One stage (Type I) Water Purification System LWPS-A11 : Two stage(Type III and type I)
Related Sub-Category
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
