Vertical Autoclave LVA-J10 - Low Volume Lab Steam Sterilizer

Vertical Autoclave LVA-J10 is a laboratory steam sterilizer that uses pressurized saturated steam at 121–134 °C to sterilize culture media, instruments, glassware, and biohazard waste. It is used in pharmaceutical, clinical, and research laboratories for controlled sterilization and contamination prevention.

What Is Vertical Autoclave LVA-J10?

Vertical Autoclave LVA-J10 is a moist heat sterilization system designed to eliminate microorganisms and spores using saturated steam under controlled temperature and pressure. It enables repeatable sterilization cycles for laboratory materials in regulated environments.

What Is This Autoclave Used For?

This autoclave is used for:

Sterilizing culture media and liquids
Decontaminating laboratory instruments
Processing biohazard waste
Sterilizing glassware and reusable materials

It supports contamination-free laboratory workflows.

How Does Vertical Autoclave LVA-J10 Work?

Labtron system generates saturated steam inside a sealed chamber. Steam penetrates materials and destroys microorganisms and spores through thermal exposure. Programmable cycles regulate temperature, pressure, and duration, followed by controlled exhaust for safe unloading.

Key Functional Capabilities

Steam sterilization from 121 °C to 134 °C
Programmable sterilization cycles
Digital monitoring of temperature and pressure
Safety interlocks and pressure protection
Suitable for liquids, solids, and instruments

Technical Specifications

Parameter	Specification
Temperature	121–134 °C
Pressure	0.1–0.22 MPa
Control	Digital programmable interface
Chamber	Vertical loading
Safety	Pressure protection & interlocks
Power	220 V AC, 50 Hz

Who Should Use This Autoclave?

This autoclave is suitable for:

Pharmaceutical laboratories
Clinical and hospital labs
Microbiology and research facilities
Academic institutions
Food and environmental testing laboratories

When Should You Choose This Autoclave?

Choose Labtron LVA-J10 when:

Routine sterilization is required
Liquid and solid sterilization is needed
Programmable cycle control is required
Vertical configuration fits laboratory space
Compliance with GMP and biosafety protocols is required

Vertical vs Alternative Equipment

Equipment	Best For	Notes
Vertical Autoclave	Routine lab sterilization	Compact and efficient
Horizontal Autoclave	Large batch loads	High throughput
Benchtop Autoclave	Small labs	Limited capacity
Dry Heat Sterilizer	Moisture-sensitive materials	Non-steam

Frequently Asked Questions About Vertical Autoclave LVA-J10

1Q. What materials can be sterilized?
Culture media, glassware, instruments, textiles, and biohazard waste can be sterilized using saturated steam.

2Q. What temperature does it operate at?
The autoclave operates between 121 °C and 134 °C depending on load type.

3Q. Can liquids be sterilized safely?
Yes, controlled cycles allow safe sterilization of liquid media without boil-over.

4Q. How long does a sterilization cycle take?
Typical cycles range from 20 to 60 minutes depending on load volume.

5Q. Does it require special water?
Yes, distilled or deionized water is recommended for optimal performance.

Typical Applications

Culture media sterilization
Laboratory instrument decontamination
Biohazard waste treatment
Clinical sterilization workflows

Compliance and Standards

Good Manufacturing Practice (GMP)
Laboratory biosafety protocols
Healthcare sterilization procedures

Executive Summary

Vertical Autoclave LVA-J10 is suitable for laboratories requiring steam sterilization at 121–134 °C with programmable cycles, digital monitoring, and safety protection. It is ideal for routine sterilization workflows in pharmaceutical, clinical, research, and testing laboratories.