Low-Temperature Water Bath LLWB-E10

The Low-Temperature Water Bath requires different liquid media based on operating temperatures. Alcohol is used below 5°C, water between 5°C and 80°C, and antifreeze solution from 0°C to -20°C. Selecting the appropriate medium ensures effective thermal transfer. This also prevents damage to the heating components during operation.

Labtron’s Low-Temperature Water Bath uses PID automatic control for accurate thermal stability. It responds quickly to temperature changes, minimizing fluctuations during long experimental runs. This ensures consistent performance, even during extended heating or cooling cycles. The system is ideal for temperature-sensitive applications.

Labtron’s Low-Temperature Water Bath must be filled with liquid at least 100 mm above the heating element before powering on, to prevent damage and overheating. Labtron advises ensuring the unit is properly grounded to avoid electrical hazards. Maintain a 300 mm clearance on all sides for adequate ventilation and safe operation. Avoid operating the circulation pump without liquid to prevent internal damage. Always switch off and unplug the Low-Temperature Water Bath after use for safe handling and maintenance.

The Low-Temperature Water Bath should be cleaned after each use to maintain its performance. It is recommended to use a soft cloth or tissue paper to wipe the display screen and exterior surfaces to avoid scratching. Harsh objects or abrasive materials should never be used, as they could damage the delicate components. After cleaning, ensure the power is off before performing maintenance or cleaning tasks. Regular cleaning will help prolong the lifespan of the unit and ensure reliable operation.

Our Low-Temperature Water Bath is equipped with an alarm system for operational errors, which will be indicated by the display showing "----" and the buzzer sounding continuously. In this case, it is essential to check the temperature sensor and wiring for any faults. If the issue persists, the system may require technical support or servicing to resolve the error. Regular maintenance and careful handling can help prevent such operational errors and keep the bath functioning properly.

Our Low-Temperature Water Bath is designed to support external circulation through a built-in circulating pump. This feature allows users to transfer temperature-controlled liquid to external equipment or samples, providing versatile thermal management. The bath can be integrated with other laboratory systems that require consistent temperature regulation. This functionality is essential for experiments that need precise thermal conditions beyond the bath itself.