LMF-E21 model of Muffle Furnace is microprocessor controlled furnace with molded ceramic fibre insulation ensuring minimum heat loss. It is accurate, reliable and efficiently designed for minimal space requirement in the laboratory and is equipped with instantaneous energy consumption indicator, calculator for average working temperature, total working hour counter and descriptive error indicator. With abrasion resistant body, heating elements Fe-Cr-Al embedded into bricks, S type thermocouple, it is ideal for maximum and continuous working temperature of 1300 °C.
Request QuoteMax. Temperature | 1300 °C |
Capacity | 7 L |
Heating Program | 4 step |
Thermal Rate | 3 °C - 20 °C |
Heating element | Fe-Cr-Al |
Program Memories | 4 |
Thermocouple Type | S Type |
Heating Element Placement | Embedded into brick walls |
Inner Insulation Material | Insulating Fire Brick |
Front Face Insulation Material | Insulating Fire Brick |
Door Insulation Material | Ceramic Fibre Board |
Housing Material | Steel Sheet |
Housing Coating | Epoxy powder coating |
Chimney | Standard |
Element Heating Element Protection | Quartz Tube |
Lockable Door Handle | Sidewards |
Temperature Control Accuracy | ± 1 °C (can vary at low temperatures) |
Measurement Accuracy | ± 1 °C |
Inner Volume Temperature Homogenity | ± 10 °C |
Max. Current | 16A |
Power | 3.500 W |
Inner Chamber Dimension (W x H x D) | 180 x 160 x 260 mm |
Product Outer Dimension (Wx H x D) | 476 x 628 x 655 mm |
Gross Dimension (W x H x D) | 536 x 815 x 688 mm |
Net Weight | 56 kg |
Gross weight | 71kg |
It is used for applications such as: Fusing glass, Creating enamel coatings, Ceramics, Soldering, Brazing, Rubbers & Polymers. It is also used for metallurgical applications, for ash content determination and in research centers and medical laboratories to determine the volatile & non-combustible proportion of the sample.
Sr. No. | Accessory |
1 | High Temperature Gloves |
2 | Tongs |
3 | Alumina Crucibles |
4 | Metal Crucibles |
5 | Alumina Combustion Boats |
6 | Ceramic pipes |
7 | Extra Thermocouples |
Over Temperature Limiter Lift-up Door Stainless Steel body Gas Supply Connection Open Door Sensor Second Thermocouple Observation Hole PC Connection 110 V Power Supply
Inner Module: Changing inner module renews your furnace close to a brand new furnace
Door Insulation: With sheet metal holder vessel
Control Card: Easy-to-replace, pre-programmed
Power Card: Easy-to-replace
Display: 4 x 20 LCD display
Cooling Fan: 80 x 80 x 20/ 220 V fan
Chimney Fan: 40 x 40 x 10/ 5V fan
Similar Products
Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608