Sample Concentrator LSCO-A10 accelerates the concentration of samples by blowing nitrogen gas at the rate of 15 L/min. It comes with a microprocessor controller which controls the temperature of high-purity aluminium when the equipment is in operation. The models have provisions of concentrating around 3 to 24 samples at a time.
Request QuoteNumber of samples | 3 to 24 wells |
Nitrogen Flow Rate | 15 L/min |
Nitrogen Pressure | 0.02 MPa (Gas needle ≤ 16pcs) 0.05MPa (Gas needle > 16pcs) |
Block Quantity | 1 |
Temperature Control Range | Room temp. +5 ℃ to 160 ℃ |
Needle length | 150 mm |
Temp. uniformity | ≤ ± 0.5 ℃ |
Temp. accuracy | ±0.5 ℃ (at 40 ℃) ± 1 ℃ (at 120 ℃) |
Display accuracy | 0.1 ℃ |
Heating time | ≤ 15 min (from 25 ℃ to 160 ℃) |
Timing range | 1 min - 99 h 59 min |
Voltage | AC 220 V or AC 110 V, 50 / 60 Hz |
Power Consumption | 300 W |
Dimension | 260 x 220 x 450 mm |
Weight | 7 kg |
Sample Concentrator is used for sample preparation, drug screening, hormone assays, chromatographic analysis and scintillation counting.
Block no. | Diameter of tubes | Capacity |
SCB-01 | 10 mm | 24 |
SCB-02 | 12 mm | 24 |
SCB-03 | 13 mm | 24 |
SCB-04 | 15 mm | 16 |
SCB-05 | 16 mm | 16 |
SCB-06 | 19 mm | 12 |
SCB-07 | 20 mm | 12 |
SCB-08 | 26 mm | 8 |
SCB-09 | 28 mm | 4 |
SCB-10 | 40 mm | 3 |
SCB-11 | 1.5 ml (centrifuge tube) | 24 |
SCB-12 | 2.0 ml (centrifuge tube) | 24 |
Similar Products
Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608