How can user diagnose and correct stray light affecting high-absorbance measurements in Single Beam UV-Visible Spectrophotometer LUS-F11?

Labtron supplies premium Single Beam UV-Visible Spectrophotometer LUS-F11. Stray light-unwanted wavelengths passing through the sample—inevitably distorts readings above 2?AU, compressing absorbance values and skewing photometric linearity. To detect it, use cutoff solutions (e.g., KCl, NaI, NaNO?) at their non-transmitting wavelengths and look for a non-zero transmittance. High-quality holographic gratings and meticulously clean internal optics help suppress stray light. Regular checks using USP or Ph.Eur. procedures, plus maintaining beam-path seals, are crucial to maintaining full dynamic range. Proper stray-light control expands reliable measurements to higher absorbance levels, ensuring data accuracy and regulatory compliance.

Why do lamp-switch artifacts appear in the crossover region, and how can user minimize them in Single Beam UV-Visible Spectrophotometer LUS-F11?

Labtron supplies Single Beam UV-Visible Spectrophotometer LUS-F11 with advanced features. Noise or artifacts around 320–360?nm often arise because the instrument toggles between UV (deuterium) and visible (tungsten) lamps during scans. Transient misalignment or imperfect timing introduces ghost peaks. Mitigation requires precise optical alignment, clean lamp compartments, and software settings that delay data capture during lamp switch. Regular recalibration and lamp maintenance can reduce crossover noise. This improves spectral continuity and ensures accurate absorbance values across the UV–Vis boundary.

How should I verify and maintain photometric accuracy and linearity in Single Beam UV-Visible Spectrophotometer LUS-F11?

. Labtron supplies Single Beam UV-Visible Spectrophotometer LUS-F11 with advanced features. Photometric accuracy-consistency between measured absorbance and certified standards—is vital for quantitative work. Perform linearity tests with potassium dichromate standards and compare against reference absorbances at key wavelengths. Stray-light, detector saturation, or lamp deterioration can disrupt linearity; instrument response should be linear across the working range. Regularly monitor baseline noise and linearity, updating calibration.

What factors contribute to non-linearity at high concentrations, even after stray light correction in Single Beam UV-Visible Spectrophotometer LUS-F11

Labtron supplies premium Single Beam UV-Visible Spectrophotometer LUS-F11. Even in stray-light-controlled instruments, non-linearity may persist at high analyte concentrations due to molecular interactions that alter extinction coefficients or refractive indices, and absorption flattening in suspensions. To counter this, dilute samples to <1?AU or use shorter path-length cuvettes, ensuring compliance with Beer–Lambert conditions. For turbid solutions, pre-treat via filtration or centrifugation. Such steps realign calibration curves and minimize systematic error in concentration determination.

Single Beam UV-Visible Spectrophotometer LUS-A11

Name: Single Beam UV-Visible Spectrophotometer LUS-A11
Brand: Labtron
SKU: LUS-A11
Rating: 4.7 (714 reviews)

Single Beam UV-Visible Spectrophotometer LUS-A11 is formulated with large LCD display screen and 8 cell holder capacity. It has full functionality from 190 – 1100 nm range of wavelength. It comes with 1.8nm spectral bandwidth. This single beam spectrophotometer has highly stable optics with 1200 lines/mm grating. It is particularly designed to meet its versatility in research and industries.

Request Quote

Wavelength Range	190 ~ 1100 nm
Spectral Bandwidth	1.8 nm
Wavelength Accuracy	± 0.3 nm
Wavelength Repeatability	0.2 nm
Photometric Range	0 - 200 % T, (-0.3) to (-3.0) A, 0 - 9999 C
Photometric Accuracy	± 0.3 % T
Photometric Repeatability	0.2 % T
Detector	Silicon Photodiode
Light Source	Deuterium & Tungsten Halogen Lamp
Stray Light	≤ 0.05 % T at 220 nm, 360 nm
Stability	0.002 A / h at 500 nm
Data Output Port	USB
Power Requirement	AC 220 V / 50 Hz, 110 V / 60 Hz.
Noise	± 0.001 A
Optical System	Single Beam (1200 lines / mm grating)
Baseline Flatness	± 0.001 A
Printer Port	Parallel Port
Packing Size	860 x 660 x 465 mm
Packing Weight	35 kg

Single beam spectrophotometer
Wavelength range 190nm – 1100nm
Spectral bandwidth 1.8nm
Optical system with 1200 lines/mm grating
Deuterium & Tungsten Halogen Lamp as dual light source
6 inches LCD (320x240 Dots) display & integrated user interface
8 cell holder available along with USB port for data storage

Single Beam UV-Visible Spectrophotometer is ideal for quality control, general research, pharmaceuticals, biochemical and clinical laboratory applications

Download catalog for
Single Beam UV-Visible Spectrophotometer LUS-A11 Catalog

Available Range :

Models of Single Beam UV-Visible Spectrophotometer

Labtron single beam UV-visible spectrophotometers offer a broad range of wavelengths and many choices for spectral bandwidth. They provide quantitative analysis and photometric measurement with user-friendly interfaces. They come with USB connections and a large colorful LCD display. They are flexible since they have several light sources installed. Our single beam spectrophotometers offer high performance, reliability, and accuracy with auto wavelength adjustment and robust construction.

Single Beam UV-Visible Spectrophotometer LUS-A41

Wavelength Range : 190 to 1100 nm
Spectral Bandwidth : 2 nm
Wavelength Setting : Automatic
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-E11

Wavelength Range : 190 to 1100 nm
Spectral Bandwidth : 2 nm
Optical System : Single Beam, Grating 1200 lines/ mm
Wavelength Accuracy : ± 0.1nm at 656.1 nm, ± 0.3 nm at all

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-E12

Wavelength Range : 320 to 1100 nm
Spectral Bandwidth : 1 nm
Optical System : Single Beam, Grating 1200 lines/ mm
Wavelength Accuracy : ± 0.1nm at 656.1 nm, ± 0.3 nm at all

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-F12

Spectral Bandwidth : 4nm (optional 2nm)
Wavelength Range : 320 to 1100 nm
Optical System : Single beam path, holographic diffraction grating
Wavelength Accuracy : ± 0.8 nm

Compare Remove

Single Beam UV-Vis Spectrophotometer LUS-C24

Wavelength Range : 190 to 1000 nm
Spectral Bandwidth : 4 nm
Wavelength Setting : Automatic
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-A42

Wavelength Range : 320 to 1100 nm
Spectral Bandwidth : 2 nm
Wavelength Setting : Automatic
Optical System : Single Beam, C-T monochromator, Blazed Holographic Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Vis Spectrophotometer LUS-A46

Wavelength Range : 320 to 1020 nm
Spectral Bandwidth : 4 nm
Wavelength Setting : Manual
Optical System : Single Beam, C-T monochromator, Blazed Holographic Grating 1200 lines/nm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-A22

Wavelength Range : 190 ~ 1100 nm
Spectral Bandwidth : 0.5 nm, 1 nm, 2 nm, 4 nm adjustable
Wavelength Accuracy : ± 0.3 nm
Wavelength Repeatability : ≤ 0.1 nm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-A11 FAQ's

Labtron supplies premium Single Beam UV-Visible Spectrophotometer LUS-F11. Stray light-unwanted wavelengths passing through the sample—inevitably distorts readings above 2?AU, compressing absorbance values and skewing photometric linearity. To detect it, use cutoff solutions (e.g., KCl, NaI, NaNO?) at their non-transmitting wavelengths and look for a non-zero transmittance. High-quality holographic gratings and meticulously clean internal optics help suppress stray light. Regular checks using USP or Ph.Eur. procedures, plus maintaining beam-path seals, are crucial to maintaining full dynamic range. Proper stray-light control expands reliable measurements to higher absorbance levels, ensuring data accuracy and regulatory compliance.
Labtron supplies Single Beam UV-Visible Spectrophotometer LUS-F11 with advanced features. Noise or artifacts around 320–360?nm often arise because the instrument toggles between UV (deuterium) and visible (tungsten) lamps during scans. Transient misalignment or imperfect timing introduces ghost peaks. Mitigation requires precise optical alignment, clean lamp compartments, and software settings that delay data capture during lamp switch. Regular recalibration and lamp maintenance can reduce crossover noise. This improves spectral continuity and ensures accurate absorbance values across the UV–Vis boundary.
. Labtron supplies Single Beam UV-Visible Spectrophotometer LUS-F11 with advanced features. Photometric accuracy-consistency between measured absorbance and certified standards—is vital for quantitative work. Perform linearity tests with potassium dichromate standards and compare against reference absorbances at key wavelengths. Stray-light, detector saturation, or lamp deterioration can disrupt linearity; instrument response should be linear across the working range. Regularly monitor baseline noise and linearity, updating calibration.
Labtron supplies premium Single Beam UV-Visible Spectrophotometer LUS-F11. Even in stray-light-controlled instruments, non-linearity may persist at high analyte concentrations due to molecular interactions that alter extinction coefficients or refractive indices, and absorption flattening in suspensions. To counter this, dilute samples to <1?AU or use shorter path-length cuvettes, ensuring compliance with Beer–Lambert conditions. For turbid solutions, pre-treat via filtration or centrifugation. Such steps realign calibration curves and minimize systematic error in concentration determination.