How does the Single Beam UV-Visible Spectrophotometer LUS F12 reduce stray light effects at high absorbance?

Labtron’s Single Beam UV-Visible Spectrophotometer LUS F12 Single Beam UV-Visible Spectrophotometer minimizes stray light—unwanted wavelengths that can distort measurements at absorbance over ~2?AU—by using high-grade holographic gratings and tight optical seals, ensuring more accurate results in high-concentration assays. Its stray light performance is validated using cutoff filters like sodium nitrite or potassium chloride, and should meet or exceed pharmacopeial standards for dynamic range. Proper external checks and maintenance ensure this capability remains intact over its service life.

How does the Single Beam UV-Visible Spectrophotometer LUS F12 maintain wavelength accuracy and resolution over time?

Labtron’s Single Beam UV-Visible Spectrophotometer LUS-F12 incorporates automated wavelength calibration using certified standards like mercury or holmium filters, allowing users to self-verify and adjust peak positioning within ±0.1?nm accuracy. Its high-resolution holographic diffraction grating further ensures crisp spectral resolution so closely spaced peaks remain identifiable. Routine performance checks help catch minimal drift early, maintaining consistent analytical precision for critical quantitative applications.

How can I troubleshoot ghost peaks or spectral anomalies on the Single Beam UV-Visible Spectrophotometer LUS F12?

Labtron’s Single Beam UV-Visible Spectrophotometer LUS-F12 may occasionally display ghost peaks due to internal reflections or diffraction from mirrors, gratings, or particles within the optical path. To combat this, clean and inspect all optics, ensure the monochromator slits are free from debris, and verify that internal surfaces remain well-aligned. Regular stray-light tests using cutoff filters can expose specific sources of unwanted signals, enabling precise corrective action.

What causes non-linear Beer Lambert behavior in the Single Beam UV-Visible Spectrophotometer LUS F12, and how to correct it?

Labtron supplies advanced Single Beam UV-Visible Spectrophotometer LUS-F12, deviations from linear absorbance arise when sample absorbance exceeds ~1?AU due to stray light, saturation, or chemical interactions like aggregation or refractive index shifts. To maintain Beer Lambert compliance, dilute samples, use shorter pathlength cuvettes, filter turbid solutions, and validate linearity with calibration curves. These strategies preserve quantitation integrity across concentration ranges.

How does the LUS F12 manage lamp-switch artifacts in UV–Vis scans?

Labtron’s Single Beam UV-Visible Spectrophotometer LUS-F12 transitions between deuterium and tungsten lamps around 320–360?nm; this switch can introduce artifacts if not synchronized well. To reduce crossover noise, the system delays data acquisition during lamp transitions, employs precise lamp alignment routines, and allows users to adjust the switch threshold in software. Periodic maintenance ensures smooth lamp toggling and continuity of spectra across the UV–Vis boundary.

Single Beam UV-Visible Spectrophotometer LUS-F12

Name: Single Beam UV-Visible Spectrophotometer LUS-F12
Brand: Labtron
SKU: LUS-F12
Rating: 4.7 (647 reviews)

Single Beam UV-Visible Spectrophotometer LUS-F12 features a wavelength resolution of 0.1 nm for analyzing complex samples or subtle spectral shifts with high precision. The spectrophotometer has tungsten and deuterium lamps, ensuring complete spectral coverage. It includes holographic diffraction grating for uniform spectral efficiency across the wavelength range. Our single beam UV-visible spectrophotometer offers three adjustable scanning speeds to balance scan duration and data quality.

Request Quote

Spectral Bandwidth	4nm (optional 2nm)
Wavelength Range	320 to 1100 nm
Optical System	Single beam path, holographic diffraction grating
Wavelength Accuracy	± 0.8 nm
Wavelength Repeatability	0.2 nm or less
Wavelength Setting	Automatic Wavelength Setting
Wavelength Resolution	0.1 nm
Luminosity Range	0 to 200% T, -0.3 to 3A, 0 to 9999 C, 0 to 9999 F
Photometric Accuracy	±0.002A (0 to 0.5A), ±0.004A (0.5 to1A), ±0.3%T (0 to100%T)
Photometric Repeatability	≤ 0.001A (0 to 0.5A), ≤0.002A (0.5 to 1A), ≤0.2%T (0 to 100%T)
Stray Light	≤0.1%T (220/360nm)
Baseline Drift	≤0.002A/ h (500nm,0A)
Noise	± 0.2%T (0%T line) ±0.4%T (100%T line) ±0.001A (500nm)
Baseline Flatness	±0.003A
Scan Speed	Three adjustable speeds: high, medium and low
Detector	Imported silicon photodiode
Light Source	Imported long-life tungsten and deuterium lamps
Display	3-inch 128× 64 dot matrix LCD display
Keyboard	Tap film keys
Data Interface	USB Port
Printout	Microprinter, PC (Optional)
Power Supply	AC 902 to50V, 50/60Hz
Overall Dimensions	430 ×320 ×195mm
Weight	10 kg

Wide Wavelength Range
Standard Curve Display
Silicon Photodiode Sensors
Dual Lamp Sources
Adjustable Scan Speed

Single Beam UV-Visible Spectrophotometer LUS-F12 passes monochromatic light through a sample to determine chemical characteristics. It is applied in biochemical analysis, environmental monitoring and pharmaceutical industries in quality control.

Download catalog for
Single Beam UV-Visible Spectrophotometer LUS-F12 Catalog

Available Range :

Models of Single Beam UV-Visible Spectrophotometer

Labtron single beam UV-visible spectrophotometers offer a broad range of wavelengths and many choices for spectral bandwidth. They provide quantitative analysis and photometric measurement with user-friendly interfaces. They come with USB connections and a large colorful LCD display. They are flexible since they have several light sources installed. Our single beam spectrophotometers offer high performance, reliability, and accuracy with auto wavelength adjustment and robust construction.

Single Beam UV-Vis Spectrophotometer LUS-C18

Wavelength Range : 190 to 1100 nm
Spectral Bandwidth : 2 nm
Wavelength Setting : Automatic
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-A10

Wavelength Range : 190 ~ 1100 nm
Spectral Bandwidth : 1 nm
Wavelength Accuracy : ± 0.3 nm
Wavelength Repeatability : 0.2 nm

Compare Remove

Single Beam UV-Vis Spectrophotometer LUS-C31

Wavelength Range : 195 to 1020 nm
Spectral Bandwidth : 5 nm
Wavelength Setting : Manual
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Vis Spectrophotometer LUS-C24

Wavelength Range : 190 to 1000 nm
Spectral Bandwidth : 4 nm
Wavelength Setting : Automatic
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-C11

Wavelength Range : 200 to 1000 nm
Spectral Bandwidth : 2 nm
Optical System : Single-beam, self-quasi optical path
Wavelength Tolerance : ±2 nm

Compare Remove

Single Beam UV-Vis Spectrophotometer LUS-C23

Wavelength Range : 190 to 1000 nm
Spectral Bandwidth : 2 nm
Wavelength Setting : Automatic
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-A11

Wavelength Range : 190 ~ 1100 nm
Spectral Bandwidth : 1.8 nm
Wavelength Accuracy : ± 0.3 nm
Wavelength Repeatability : 0.2 nm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-C27

Wavelength Range : 190 to 1020 nm
Spectral Bandwidth : 2 nm
Wavelength Setting : Manual
Optical System : Single Beam, Grating 1200 lines/ mm

Compare Remove

Single Beam UV-Visible Spectrophotometer LUS-F12 FAQ's

Labtron’s Single Beam UV-Visible Spectrophotometer LUS F12 Single Beam UV-Visible Spectrophotometer minimizes stray light—unwanted wavelengths that can distort measurements at absorbance over ~2?AU—by using high-grade holographic gratings and tight optical seals, ensuring more accurate results in high-concentration assays. Its stray light performance is validated using cutoff filters like sodium nitrite or potassium chloride, and should meet or exceed pharmacopeial standards for dynamic range. Proper external checks and maintenance ensure this capability remains intact over its service life.
Labtron’s Single Beam UV-Visible Spectrophotometer LUS-F12 incorporates automated wavelength calibration using certified standards like mercury or holmium filters, allowing users to self-verify and adjust peak positioning within ±0.1?nm accuracy. Its high-resolution holographic diffraction grating further ensures crisp spectral resolution so closely spaced peaks remain identifiable. Routine performance checks help catch minimal drift early, maintaining consistent analytical precision for critical quantitative applications.
Labtron’s Single Beam UV-Visible Spectrophotometer LUS-F12 may occasionally display ghost peaks due to internal reflections or diffraction from mirrors, gratings, or particles within the optical path. To combat this, clean and inspect all optics, ensure the monochromator slits are free from debris, and verify that internal surfaces remain well-aligned. Regular stray-light tests using cutoff filters can expose specific sources of unwanted signals, enabling precise corrective action.
Labtron supplies advanced Single Beam UV-Visible Spectrophotometer LUS-F12, deviations from linear absorbance arise when sample absorbance exceeds ~1?AU due to stray light, saturation, or chemical interactions like aggregation or refractive index shifts. To maintain Beer Lambert compliance, dilute samples, use shorter pathlength cuvettes, filter turbid solutions, and validate linearity with calibration curves. These strategies preserve quantitation integrity across concentration ranges.
Labtron’s Single Beam UV-Visible Spectrophotometer LUS-F12 transitions between deuterium and tungsten lamps around 320–360?nm; this switch can introduce artifacts if not synchronized well. To reduce crossover noise, the system delays data acquisition during lamp transitions, employs precise lamp alignment routines, and allows users to adjust the switch threshold in software. Periodic maintenance ensures smooth lamp toggling and continuity of spectra across the UV–Vis boundary.