Request A Quote
Bench Top Spray Dryer LBSD-A11

Bench Top Spray Dryer LBSD-A11

Bench Top Spray Dryer LBSD-A11 features a maximum sample feed of 500 mL/h. It has an integrated inert loop to provide closed loop circulation under inert conditions. This dryer features a 7-inch LCD that displays parameters like inlet temperature, gas flow volume, pump speed, and de-blocker frequency. Its two fluid-nozzle design uses compressed gas to atomize liquid into fine droplets, enabling rapid and uniform drying. Our dryer is designed for safe and efficient drying of organic solvents and aqueous solutions.

Request Quote
Maximum Sample Feed 500 mL/h
Minimum Sample Feed 30 mL
Rated Airflow 1.5 m³/min
Compatible Solvents Methanol, Ethanol, Toluene, Hexane, Acetone, Ethyl acetate
Display 7-inch LCD
Min. Outlet Temperature 40°C (related to the boiling point of the solvent)
Max. Inlet Temperature 200°C
Temperature Precision ± 1°C
Heater Power 1500W
Nozzle Jet Standard: 1.0 mm standard
Optional: 0.5, 0.8, 1.5, 2.0 mm
Nozzle Type Two fluid nozzle
Control PLC
Possible Particle Size Range 1 to 25 μm
Mean Residence Time 1.0 to 1.5 sec
Gas Type N2 (for solvent) or Compressed air (for aqueous)
Gas Flow Rate 200 to 1000 L/h, 0.5 to 2 bar
Spray Chamber Material SUS304 Stainless steel
Cyclone Separator Material SUS304 Stainless steel
Receiving Tank Material SUS304 Stainless steel
Body Material SUS304 Stainless steel
Seal of Cyclone/Cylinder Silicone
Thermal Protection Blower does not stop until temperature is below 90℃
Deblocking Automatic
Pump Peristaltic pump
Power 2500 W
Power Supply 220 V single phase, 50 to 60 Hz
Spray Dryer Dimension 800 × 550 × 900 mm
Inert Loop System Dimension 900 × 800 × 900 mm
Spray Dryer Packing Dimension 1000 × 810 × 1140 mm
Inert Loop System Packing Dimension 1100 × 1000 × 1080 mm
Spray Dryer Weight 141 kg
Inert Loop System Weight 195 kg
Gross Weight 336 kg
  • Glass drying chamber

  • Explosion-proof design

  • One-click operation

  • Fast set-up and easy cleaning

  • Integrated nozzle de-blocking mechanism

Our Bench Top Spray Dryer LBSD-A11 is used in pharmaceutical and food industries for producing uniform powder from heat-sensitive or solvent-based liquids. It is applied in material science and chemical labs for drying polymers, resins, and plant extracts.

Condensate Recovery Device

Name

Specification

Nozzle Jet 01

1 mm

Nozzle Jet 02

0.5 mm

Nozzle Jet 03

0.8 mm

Nozzle Jet 04

1.5 mm

Nozzle Jet 05

2.0 mm

Models of Bench Top Spray Dryer

Labtron Bench Top Spray Dryer is specialized to convert liquid solutions or suspensions into dry powders with 500ml/h capacity. They feature high-efficiency cyclone separator for effective collection of dried particles. Their adjustable feed rate ensures uniform sample processing and minimized waste. They include built-in pump for correct atomization of fluid samples before desiccation. Our Bench Top Spray Dryer evaluates water clarity in wastewater treatment, aquaculture, storm water management, recreational water testing.

Bench Top Spray Dryer LBSD-A10

Bench Top Spray Dryer LBSD-A10

  • Capacity : 500ml/h
  • Minimum Sample Volume : 30ml
  • Rated Airflow : 1 m³/min
  • Display : 7-Inch LCD
Bench Top Spray Dryer LBSD-A11 FAQ's
  • Safety is a key aspect of the Bench Top Spray Dryer LBSD-A11, especially when working with volatile solvents like ethanol and methanol. The unit is equipped with a fully integrated inert loop system that circulates nitrogen gas within a closed loop. This setup eliminates the presence of oxygen during drying, thereby minimizing the risk of ignition and enabling safe processing of flammable organic materials.

  • Labtron’s Bench Top Spray Dryer LBSD-A11 features an advanced PLC-based control system paired with a 7-inch touchscreen LCD. This user interface displays all critical operating parameters, including inlet temperature, gas flow rate, pump speed, and nozzle de-blocking frequency. It supports one-touch operation, programmable settings, and real-time monitoring, ensuring easy and precise control over the drying process.

  • This spray dryer can produce fine, uniform particles within a size range of 1 to 25 microns. Such control over particle size makes the Bench Top Spray Dryer LBSD-A11 highly effective for applications requiring precise granule characteristics, including drug delivery systems, flavor encapsulation, and advanced material research where consistency is critical.

  • The design of the Bench Top Spray Dryer LBSD-A11 emphasizes convenience and user-friendliness. It has a modular construction and a transparent glass drying chamber that allows users to easily inspect internal components. Cleaning is simplified through fast assembly and disassembly, and the built-in automatic nozzle de-blocking mechanism prevents clogging, reducing downtime and extending equipment life.

  • Our Bench Top Spray Dryer LBSD-A11 is widely used in industries such as pharmaceuticals, food and beverage, chemical engineering, and materials science. It is particularly valued in R&D environments where small sample quantities, controlled drying conditions, and accurate particle sizing are crucial for the development of formulations, product prototypes, or innovative chemical compounds.

Post your question?

Our experts are here to help!

Need a Product

send details for best price quotation

Click
For

Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608

Copyright © 2026 Labtron Equipment Ltd. All rights reserved.