Bench Top Spray Dryer LBSD-A11 features a maximum sample feed of 500 mL/h. It has an integrated inert loop to provide closed loop circulation under inert conditions. This dryer features a 7-inch LCD that displays parameters like inlet temperature, gas flow volume, pump speed, and de-blocker frequency. Its two fluid-nozzle design uses compressed gas to atomize liquid into fine droplets, enabling rapid and uniform drying. Our dryer is designed for safe and efficient drying of organic solvents and aqueous solutions.
| Maximum Sample Feed | 500 mL/h |
| Minimum Sample Feed | 30 mL |
| Rated Airflow | 1.5 m³/min |
| Compatible Solvents | Methanol, Ethanol, Toluene, Hexane, Acetone, Ethyl acetate |
| Display | 7-inch LCD |
| Min. Outlet Temperature | 40°C (related to the boiling point of the solvent) |
| Max. Inlet Temperature | 200°C |
| Temperature Precision | ± 1°C |
| Heater Power | 1500W |
| Nozzle Jet | Standard: 1.0 mm standard Optional: 0.5, 0.8, 1.5, 2.0 mm |
| Nozzle Type | Two fluid nozzle |
| Control | PLC |
| Possible Particle Size Range | 1 to 25 μm |
| Mean Residence Time | 1.0 to 1.5 sec |
| Gas Type | N2 (for solvent) or Compressed air (for aqueous) |
| Gas Flow Rate | 200 to 1000 L/h, 0.5 to 2 bar |
| Spray Chamber Material | SUS304 Stainless steel |
| Cyclone Separator Material | SUS304 Stainless steel |
| Receiving Tank Material | SUS304 Stainless steel |
| Body Material | SUS304 Stainless steel |
| Seal of Cyclone/Cylinder | Silicone |
| Thermal Protection | Blower does not stop until temperature is below 90℃ |
| Deblocking | Automatic |
| Pump | Peristaltic pump |
| Power | 2500 W |
| Power Supply | 220 V single phase, 50 to 60 Hz |
| Spray Dryer Dimension | 800 × 550 × 900 mm |
| Inert Loop System Dimension | 900 × 800 × 900 mm |
| Spray Dryer Packing Dimension | 1000 × 810 × 1140 mm |
| Inert Loop System Packing Dimension | 1100 × 1000 × 1080 mm |
| Spray Dryer Weight | 141 kg |
| Inert Loop System Weight | 195 kg |
| Gross Weight | 336 kg |
Glass drying chamber
Explosion-proof design
One-click operation
Fast set-up and easy cleaning
Integrated nozzle de-blocking mechanism
Our Bench Top Spray Dryer LBSD-A11 is used in pharmaceutical and food industries for producing uniform powder from heat-sensitive or solvent-based liquids. It is applied in material science and chemical labs for drying polymers, resins, and plant extracts.
Condensate Recovery Device
Name | Specification |
Nozzle Jet 01 | 1 mm |
Nozzle Jet 02 | 0.5 mm |
Nozzle Jet 03 | 0.8 mm |
Nozzle Jet 04 | 1.5 mm |
Nozzle Jet 05 | 2.0 mm |
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
