| Gas Chromatography Flow Rate | 1 to 1.5 ml / min |
| Maximum Flow Rate | 10 ml / min |
| Inlet Temperature | 450 °C |
| Pressure Range | 0 to 50 psi |
| Heating Rate | Upto 120 °C / min |
| Temperature Range | 4 °C to 450 °C |
| Pressure Control Mode | Electronic pressure control ( Supports CV and CC ) |
| Split Mode | Split / split less |
| Split Ratio | 500:1 |
| Temperature Programming | 7 stages / 8 platforms |
| Sample size | 0.1 to 10uL |
| Peak Area Repeatability | < 1 % RSD |
| Retention Time | < 0.5% RSD |
| Sweeping Gas Volume | 2 to 10ml/min |
| Mass Spectrometry Mass Range | 1.5 to 1000 amu |
| Ion – Source Temperature | 100 °C to 350 °C |
| GC-MS Interface Temperature | 400 °C |
| Scan Rate | Upto 10000 amu/s |
| Stability | ± 0.10 amu / 48 hrs |
| Filament Emission Current | 0 to 350 µA |
| EI Source Ionization Energy | 10 eV to 100 eV |
| Resolution | Unit Resolution |
| Detector | High energy dynode electron multiplier |
| Sensitivity | Full scan (S/N is ≥ 30:1) |
| Vacuum | Turbo molecular pump (67 L/s) |
| Working Pressure | 220V (±5%), 50Hz (±1) |
| Working Temperature | 18℃ to 30℃ |
| Working Humidity | <70% |
| Dimensions | 580 × 280 × 520 mm |
| Weight of Autosampler (optional) | 25 kg |
| Net Weight | 10 kg |
| Gross Weight (Without Autosampler) | 15 kg |
| Gross Weight (With Autosampler) | 200 kg |
Our Gas Chromatography Mass Spectrometry LGCS-A11 is a versatile analytical tool used for industrial inspection, food safety testing, environmental monitoring, pharmaceutical development, and forensic analysis, providing accurate and reliable detection of complex substances.
| Accessories Name | Quantity |
| Mechanical Pump | 1 PCS |
| GC-MS Column (0.25mm×30m×0.25um) | 1 PCS |
| Network Cable | 1 PCS |
| Series Port Cable (1.5m, Standard) | 1 PCS |
| Power Cable | 5 PCS |
| Corrugated Pipe | 1 Meter |
| Clamp Hoop | 2 PCS |
| Seal Ring | 2 PCS |
| Wrench (5.5mm to7mm) | 1 PCS |
| Wrench (10mm to12mm) | 1 PCS |
| Wrench (8mm to 10mm) | 1 PCS |
| Tweezers (120mm, Stainless Steel) | 1 PCS |
| Cross Screwdriver (Ф6×120, ph2) | 1 PCS |
| Cross Screwdriver (Ф2×50, ph1) | 1 PCS |
| Straight Screwdriver (Ф5×100) | 1 PCS |
| Monkey Wrench (150×19) | 1 PCS |
| Allen Wrench (2.5mm) | 1 PCS |
| Sleeve (M3) | 1 PCS |
| Ferrule (0.4mm) | 10 PCS |
| Syringe (10uL) | 1 PCS |
| Column Cutter (Ceramic) | 1 PCS |
| Liner | 1 PCS |
| Fuse (F10A 250V, Φ5×20mm) | 2 PCS |
| Plastic Corrugated Pipe (Plastic, I.D.19mm) | 1.5 Meter |
| Sylphon Bellows Connector | 1 PCS |
| Hose Clamp | 1 PCS |
| Ion Source Holder | 1 PCS |
| Column Measuring Tool | 1 PCS |
| Stainless Steel Tube (1/8") | 7 Meter |
| 1/8" Ferrule | 1 PCS |
| Valve Connector | 1 PCS |
| Valve Connector | 1 PCS |
| O-ring (2.5×1.8) | 5 PCS |
| O-ring (1.8×1.8) | 1 PCS |
| O-rings (25pk) | 5 PCS |
| Glass Wool (Deactivated, 2g) | 1 PCS |
| Front Ferrule (Φ1/8) | 3 PCS |
| Back Ferrule (Φ1/8) | 3 PCS |
| Injection Port Wrench | 1 PCS |
| Glass Liner | 1 PCS |
| Moisture Trap | 1 PCS |
| Oxygen Trap | 1 PCS |
| Trap Bracket | 1 PCS |
| Ribbon | 8 PCS |
| Injection Septum | 1 PCS |
| Ethernet Switch | 1 PCS |
Download catalog for
Gas Chromatography Mass Spectrometry LGCS-A11 Catalog
Labtron gas chromatography mass spectrometry (GC-MS) systems are combining both gas chromatography and mass spectrometry capabilities. They have electron multipliers and pre-filter mass analyzers for accurate analysis. These systems maintain an interface temperature and make use of seven-stage temperature programming. These column flow rates increase productivity and allow for the simultaneous examination of several components. They incorporate mass analyzers, turbo molecular pump vacuum systems, and electronic flow control systems for stability and reliability. Our systems provide screening and quantification in a single analytical run by integrating mass spectrometers, gas chromatographs, and auto samplers.
.webp)
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608