Request A Quote
Portable Nitrous Oxide Gas Detector LPNG-A11

Portable Nitrous Oxide Gas Detector LPNG-A11

Portable Nitrous Oxide Gas Detector LPNG-A11 utilizes electrochemical methods for precise detection of over 30 gases up to 20000 ppm. Offers continuous monitoring of oxygen and hazardous gases with 20 hours for combustible gases and 7 days for others. Enhanced gas safety and monitoring with versatile PC software for alarm, calibration, and analysis. Embedded MCU micro-control technology and imported sensors, ensures swift response and precise accuracy.

Portable Nitrous Oxide Gas Detector LPNG-A11
Portable Nitrous Oxide Gas Detector LPNG-A11
Portable Nitrous Oxide Gas Detector LPNG-A11
Portable Nitrous Oxide Gas Detector LPNG-A11
Request Quote
Detected Gases Oxygen (O₂), Combustible gases (EX), Toxic gases (CO, H₂S, NH₃, Cl₂, etc.)
Measuring Range 0 to 20,000 ppm
Measuring resolution Around 1 ppm
Response Time ≤ 30 s (O₂), ≤ 40 s (CO), ≤ 20 s (EX)
Sensor Type Electrochemical method
Alarm Types Audible alarm >90 dB (at 10 cm), Red LED light alarm, Vibration alarm
Operating Temperature -20°C to 50°C
Humidity Range 15% to 95% RH (non-condensing)
Charging Time 3 to 5 hours
Charging Voltage DC 5 V
Power Supply Lithium battery (1800 mAh)
Dimensions 108 × 61 × 40 mm
Weight 135 g
  • Advanced self-repair functions
  • Imported sensors
  • Time Display
  • Backlight LCD for enhanced visibility
  • USB rechargeable
  • Stores 3,000 alarm records with button or USB access

Portable Nitrous Oxide Gas Detector is used in petrochemical, chemical, agriculture, environmental protection, electronics, food, pharmaceuticals, biopharmaceuticals, green households, and fermentation processes

  • Gas detector 
  • Charging cable & plug 
  • Aluminium Case

Models of Gas Detectors

Labtron Gas Detectors delivers multi gas detectors in 4-in-1, 10-in-1 and 2-in-1 types for real-time gas monitoring with light and audible alerts. Our gas detector device is available as wall mounted, handheld or portable units with built-in sample pumps and data transfer for storage, including infrared, nitrogen, helium or methane detectors. This digital gas detector selection suits gas monitoring in industrial work areas and laboratories, with single gas detector units for carbon monoxide, ammonia or chlorine.

Portable Multiple Gas Detector LPMG-A11

Portable Multiple Gas Detector LPMG-A11

  • Gas Detected : O₂, LEL, CO, H₂S, SO₂, C₁₂, NH₃, NO₂, NO, O₃, PH₃, H₂, HF, HCl, HCN, CH₄ (IR), PID (VOCs), CO₂ (IR), C₃H₈ (IR), C₂H₄ (Choose any 5)
  • Measuring Range : O₂: 0-25% vol / 30% vol, LEL: 0-100% LEL, CO: 0-1000 ppm / 2000 ppm, H₂S: 0-200 ppm, 0-100% LEL, SO₂: 0-200 ppm, C₁₂: 0-20 ppm, NH₃: 0-100 ppm / 2000 ppm, NO₂: 0-200 ppm, NO: 0-1000 ppm, O₃: 0-5% vol, 0-5 ppm / 20 ppm, PH₃: 0-10 ppm, H₂: 0-2000 ppm / 4% vol, HF: 0-10 ppm, HCl: 0-30 ppm / 200 ppm, HCN: 0-200 ppm, CH₄ (IR): 0-5.00% vol, 0-1000 ppm, PID (VOCs): 0-1999.9 ppm, CO₂ (IR): 0-5.00% vol, (0-1% vol), 0-100 ppm, C₃H₈ (IR): 0-100 ppm, C₂H₄: 0-100 ppm (Choose any 5)
  • Measuring Resolution : O₂: 0.1% vol, LEL: 1% LEL, CO: 1 ppm, H₂S: 0.1 ppm, SO₂: 0.1 ppm, C₁₂: 0.1 ppm, NH₃: 1 ppm, NO₂: 0.1 ppm, NO: 1 ppm, O₃: 0.1 ppm, PH₃: 0.1 ppm, H₂: 1 ppm, HF: 0.1 ppm, HCl: 0.1 ppm, HCN: 0.1 ppm, CH₄ (IR): 0.01% vol, PID (VOCs): 0.1 ppm, CO₂ (IR): 0.01% vol, C₃H₈ (IR): 0.01% vol, C₂H₄: 0.1 ppm (Choose any 5)
  • Detecting Method : Diffusion or Pump
NH3 Ammonia Gas Detector LGAD-C10

NH3 Ammonia Gas Detector LGAD-C10

  • Measured Parameters : NH3, Temperature, Humidity
  • Temperature Range : -10°C to 50°C
  • Storage Temperature : -10°C to 60°C
  • Relative Humidity : 20% to 85%
Portable SO2Gas Detector LPSG-A20

Portable SO2Gas Detector LPSG-A20

  • Gas Detected : Sulphur dioxide (SO₂)
  • Measuring Range : 0 to 1000 ppm
  • Measuring Resolution : 1 ppm
  • Detection Principle : Electrochemistry
CO Carbon Monoxide Gas Detector LCGD-D11
CO Carbon Monoxide Gas Detector LCGD-D11
  • Measured Parameters : CO, Temperature, Humidity
  • Temperature Range : -10°C to 50°C
  • Storage Temperature : -10°C to 60°C
  • Relative Humidity : 20% to 85%
Portable 2 In 1 Gas Detector LPTG-A11
Portable 2 In 1 Gas Detector LPTG-A11
  • Gas Detection : SO₂ and CO
  • Measuring Range : SO₂: 0 to1000, CO: 0 to 10,000 PPM
  • Measuring Resolution : SO₂: 0.001 PPM, CO: 0.001 PPM
  • Sampling Method : Built-in pump
Wall-mounted CO₂  Gas Detector LAGD-B10

Wall-mounted CO₂ Gas Detector LAGD-B10

  • Measured Parameters : CO₂, Temperature, Humidity
  • Temperature Range : -10°C to 50°C
  • Storage Temperature : -10°C to 60°C
  • Relative Humidity : 20% to 85%
Portable Multiple Gas Detector LPMG-A12

Portable Multiple Gas Detector LPMG-A12

  • Detected Gases : LEL, flammable gases
  • Measuring Range : 0 to 10,000 ppm or 0 to 100% LEL
  • Measuring Resolution : 1 ppm or 1% LEL
  • Detection Principle : Semi-Conductor/Catalytic
Portable 10 In 1 Multi Gas Detector LMGD-A10

Portable 10 In 1 Multi Gas Detector LMGD-A10

  • Gas Detected : O₂, CO, H₂S, SO₂, Cl₂, NO₂, NH₃, CH₄, CO₂, VOC
  • Measuring Range : O₂: 0-30% VOL, CH₄: 0-50,000 PPM, CO₂: 0-50,000 PPM, VOC: 0-2,000 PPM, CO: 0-999 PPM, H₂S: 0-200 PPM, SO₂: 0-25 PPM, Cl₂: 0-50 PPM, NO₂: 0-100 PPM, NH₃: 0-100 PPM
  • Measuring Resolution : O₂: 0.01% VOL, CH₄: 1 PPM, CO₂: 1 PPM, VOC: 1 PPM, CO: 0.1 PPM, H₂S: 0.1 PPM, SO₂: 0.01 PPM, Cl₂: 0.01 PPM, NO₂: 0.01 PPM, NH₃: 0.01 PPM
  • Detection Principle : Electrochemical: O₂, CO, H₂S, SO₂, Cl₂, NO₂, NH₃, Infrared: CH₄, CO₂, Photoionization: VOC

Need a Product

send details for best price quotation

Click
For

Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608

Copyright © 2026 Labtron Equipment Ltd. All rights reserved.