Why does the Portable Airborne Particle Counter LPPC-A30 have a higher flow rate in comparison to other models?

To measure atmospheric particle concentrations more quickly and efficiently, our LPPC-A30 has a higher flow rate of 28.3 L/min. When analyzing an excessive amount of air quickly and accurately is necessary to ensure prompt results, this higher flow rate is especially helpful.

What is the anticipated lifespan of the light source in the Portable Airborne Particle Counter LPPC-A30?

Its mean time to failure (MTTF) is 3000 hours. Our LPPC-A30 uses a long-life laser diode. In addition to lowering the need for routine maintenance and guaranteeing continuous use in crucial monitoring applications, this guarantees dependable and consistent performance over an extended length of time.

How zero count and uninterrupted working time is addressed by the Portable Airborne Particle Counter LPPC-A30?

To start the measurement procedure with the least amount of delay possible, our LPPC-A30 has a zero count time of less than or equal to 10 minutes. Besides, it comes with an 8-hour continuous working time, which means that long tracking operations may be conducted without numerous pauses or recharging necessary.

Can portable airborne particle counters distinguish between several kinds of particles?

The majority of portable airborne particle monitors are unable to distinguish between various particle kinds. They take measurements of every particle in the air, including its concentration and size distribution. To identify particular particle kinds, however, further analysis methods might be required in some circumstances.

When is it advisable to calibrate portable airborne particle counters?

The manufacturers recommended calibration intervals for portable airborne particle monitors should be followed, usually every six to twelve months. Regulations and the particular application, however, may have an impact on the frequency of calibration.

Is it possible to evaluate outdoor air quality using portable airborne particle counters?

It's true that some portable counters work well outside and offer useful data on particulate matter (PM) concentrations in surrounding air. They are employed in research projects about outdoor air quality, pollution control initiatives, and environmental monitoring investigations.

Which particle size ranges are detectable by Labtron Portable Airborne Particle Counters?

The detection range of Labtron counters varies according to the model and installation selected, but in general, they can detect particles as small as 0.3 microns and as large as up to 10 microns.

How user-friendly are Labtron Portable Airborne Particle Counters?

Yes, the functioning of these counters is made simple by their simple layout. Because they include options for both automatic and manual modes, they can be used by a variety of users in a variety of settings.

Portable Airborne Particle Counter LPPC-A30

Name: Portable Airborne Particle Counter LPPC-A30
Brand: Labtron
SKU: LPPC-A30
Rating: 4.8 (918 reviews)

Portable Airborne Particle Counter LPPC-A30 offers a flow rate of 28.3 L/min. Equipped with six channels that simultaneously assess various particle sizes. Employs laser technology for accurate detection and counting of airborne particles, ensuring precise size measurement. It calculates the upper confidence limit to estimate the maximum particle concentration crucial for quality control. Stores 256 sample data for future use.

Request Quote

Flow Rate	28.3 L/min
Particle Size Channel	0.5µm, 1.0µm, 2.0µm, 3.0µm, 5.0µm, 10µm
Sampling period	1s to 99 mins 99s
Sampling frequence	1 to 99s
Maximum sampling Concentration	35000/L
Self cleaning time	Less than 10 minutes
Continuously Working Time	8 h
Light Source and Lifetime	Long life laser diode with 50,000 Hours MTTF
Display	LCD
Data Storage	13,000/USB
Power consumption	80 W
Power	AC 220 V+/-10%, 50 Hz
Dimension (W × D × H)	285 × 240 × 240 mm
Weight	7.35 Kg

Large LCD screen displays
Features Computerized verification
Built-in thermal printer
Data conversion between ft³ and m³

Portable Airborne Particle Counter is used in industries like pharmaceuticals, electronics, manufacturing, and healthcare to monitor and ensure cleanroom cleanliness by measuring airborne particles.

Download catalog for
Portable Airborne Particle Counter LPPC-A30 Catalog

Available Range :

Portable Airborne Particle Counter LPPC-A10 : 0.1 CFM ( 2.83 L/min ) Portable Airborne Particle Counter LPPC-B10 : 1.0 CFM ( 28.3 L/min ) Portable Airborne Particle Counter LPPC-B12 : 100 L/min Portable Airborne Particle Counter LPPC-A21 : 2.83 L/min Portable Airborne Particle Counter LPPC-A30 : 28.3 L/min Portable Airborne Particle Counter LPPC-B11 : 50 L/min

Models of Portable Airborne Particle Counters

Labtron Portable Airborne Particle Counters are designed for precise air quality monitoring in various environments. Each model features different flow rates, particle size ranges, and operational requirements. They utilize advanced laser technology and microcomputers to guarantee precise airborne particle counting and detection. We provide both manual and automatic counting modes, thermal printers with data conversion, and large data store capacities. Our Portable Particle Counters offer efficiency, dependability, and flexibility for continuous monitoring.

Portable Airborne Particle Counter LPPC-A11

Flow Rate : 0.1 CFM ( 2.83 L/min )
Particle Size Channel : 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Test Class : Class 100 to Class 300,000
Test Period : 1 min to 10 min ( 10 levels )

Compare Remove

Portable Airborne Particle Counter LPPC-B11

Flow Rate : 50 L/min
Particle Size Channel : 0.3 µm, 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Test Period : 1 sec to 5999 sec ( 5 L to 3000 L )
Sensitivity : 0.3 µm

Compare Remove

Portable Airborne Particle Counter LPPC-A10

Flow Rate : 0.1 CFM ( 2.83 L/min )
Particle Size Channel : 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Test Class : Class 100 to Class 300,000
Test Period : 1 min to 10 min ( 10 levels )

Compare Remove

Portable Airborne Particle Counter LPPC-A20

Flow Rate : 0.1 CFM ( 2.83 L/min )
Size Channel : 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Test Class : Class 100 to Class 300,000
Test Period : 1 min to 10 min ( 10 levels )

Compare Remove

Portable Airborne Particle Counter LPPC-B10

Flow Rate : 1.0 CFM ( 28.3 L/min )
Particle Size Channel : 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Test Period : 1 sec to 5999 sec ( 5 L to 3000 L )
Sensitivity : 0.3 µm

Compare Remove

Portable Airborne Particle Counter LPPC-B12

Flow Rate : 100 L/min
Particle Size Channel : 0.3 µm, 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Test Period : 1 sec to 5999 sec ( 5 L to 3000 L )
Sensitivity : 0.3 µm

Compare Remove

Portable Airborne Particle Counter LPPC-A21

Flow Rate : 2.83 L/min
Particle Size Channel : 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm
Alarm Level : Class100 to Class300,000
Test Period : 1 second to 99 minutes

Compare Remove

Portable Airborne Particle Counter LPPC-A30 FAQ's

To measure atmospheric particle concentrations more quickly and efficiently, our LPPC-A30 has a higher flow rate of 28.3 L/min. When analyzing an excessive amount of air quickly and accurately is necessary to ensure prompt results, this higher flow rate is especially helpful.
Its mean time to failure (MTTF) is 3000 hours. Our LPPC-A30 uses a long-life laser diode. In addition to lowering the need for routine maintenance and guaranteeing continuous use in crucial monitoring applications, this guarantees dependable and consistent performance over an extended length of time.
To start the measurement procedure with the least amount of delay possible, our LPPC-A30 has a zero count time of less than or equal to 10 minutes. Besides, it comes with an 8-hour continuous working time, which means that long tracking operations may be conducted without numerous pauses or recharging necessary.
The majority of portable airborne particle monitors are unable to distinguish between various particle kinds. They take measurements of every particle in the air, including its concentration and size distribution. To identify particular particle kinds, however, further analysis methods might be required in some circumstances.
The manufacturers recommended calibration intervals for portable airborne particle monitors should be followed, usually every six to twelve months. Regulations and the particular application, however, may have an impact on the frequency of calibration.
It's true that some portable counters work well outside and offer useful data on particulate matter (PM) concentrations in surrounding air. They are employed in research projects about outdoor air quality, pollution control initiatives, and environmental monitoring investigations.
The detection range of Labtron counters varies according to the model and installation selected, but in general, they can detect particles as small as 0.3 microns and as large as up to 10 microns.
Yes, the functioning of these counters is made simple by their simple layout. Because they include options for both automatic and manual modes, they can be used by a variety of users in a variety of settings.