info@labtron.com +44 2080 043608
IR Carbon and Sulphur Analyzer LCSA-A10

IR Carbon and Sulphur Analyzer LCSA-A10

IR Carbon and Sulphur Analyzer LCSA-A10 is a unit for determination of sulphur and carbon equipped with two treatment units including a high frequency induction burner and flexible temperature settings with automatic control. With an analysis time of 20 to 100 seconds and a sensitivity of 0.1 ppm the multi-shielded isolation circuit prevents the machine for high frequency interference. High speed 24-bit sampling improves sensitivity and accuracy.

Request Quote
Carbon analytical precision RSD ≤ 0.5 %
Sulphur analytical precision RSD ≤ 1 %
Sampling per second 24 times
Relative humidity < 75 %
Room temperature 10 ~ 30 °C
Sensitivity 0.1 ppm
Carbon detection pool Can add low carbon pool
Sulphur detection pool Can add high sulphur pool
Analysis time 35 seconds ( can be set 20 to 100 seconds )
Weighing precision 0.0001 g
Power ≥ 2.7 kV
Voltage 220 V
Oscillation frequency 20 MHz
Frequency 50 Hz
  • Ultra-low analysis with double carbon and sulphur ( automated switching )
  • 24-bit sampling for improved accuracy and sensitivity
  • Real time monitoring of carbon and sulphur curve
  • Carbon monoxide to dioxide conversion device
  • Auto cleaning and ultra-micro porous metallic dust filter
  • High precision pyro electric IR detectors
  • Low pressure heating circle for improved sulphur conversion
  • High frequency furnace using optical fiber
  • Internal pressure conceal , air tightness and filtering
  • Statistical data device for counting and online data transfer
  • Automated leakage detection ( overflow alarm )
  • Automatic dust cleaning improves analytical end results
  • High pressure ash discharge for thorough cleaning of dust within pipes
  • Platinum IR light source for continual heating and high spectral efficiency

Used to measure mass fraction of carbon and sulfur in steel, iron, casting core sand, cement, ore, catalyst, magnetic materials, ceramics, inorganic matter, graphite, refractory materials, battery materials, plants and other materials.

Compare Models

Model Carbon analytical precision Sulphur analytical precision Sampling per second Relative humidity Room temperature Sensitivity Carbon detection pool Sulphur detection pool Analysis time Weighing precision Power Voltage Oscillation frequency Frequency
LCSA-A10 RSD ≤ 0.5 % RSD ≤ 1 % 24 times < 75 % 10 ~ 30 °C 0.1 ppm Can add low carbon pool Can add high sulphur pool 35 seconds ( can be set 20 to 100 seconds ) 0.0001 g ≥ 2.7 kV 220 V 20 MHz 50 Hz
LCSA-A12 - - 32 times < 80 % 10 ~ 30 °C 0.1 ppm Can add low carbon pool Can add high sulphur pool 35 seconds ( can be set 25 to 60 seconds ) 0.0001 g ≥ 2.5 kV 220 V 20 MHz 18 Hz
LCSA-A13 - - - - - 0.1 ppm - - - - - - - -
LCSA-A11 - - - - - 0.1 ppm - - - - - - - -

Most Viewed

Customer Enquiry Form

Ask Expert

Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608

Copyright © 2024 Labtron Equipment Ltd. All rights reserved.