Kjeldahl Analyzer LKA-D10

The Labtron Kjeldahl Analyzer is designed to measure nitrogen content from 0.1 mgN to 200 mgN, which corresponds to 0.1% to 99% nitrogen concentration. This wide range makes it suitable for analyzing a variety of sample types. It offers a high recovery rate of ?99%, including the digestion process, ensuring that results are both accurate and reliable. The relative standard deviation is less than ±1%, which means it delivers consistent results even with repeated tests.

The Labtron Kjeldahl Analyzer is equipped with a microcomputer-controlled system that supports both manual and automatic modes, giving users the flexibility to operate the device according to their needs. It automates key steps such as distillation, water addition, and water level control, minimizing the need for manual intervention. This helps in reducing operator error and increases efficiency. Additionally, it can store up to 250 procedures, allowing labs to quickly recall and repeat previous tests without reconfiguring settings.

This analyzer is highly versatile and is widely used in industries such as agriculture, food and beverage, pharmaceuticals, and environmental science. It can accurately detect nitrogen content in samples like grains, oils, dairy products, food, beverages, animal feed, and even soil. Its high recovery rate and wide measurement range make it suitable for both low- and high-nitrogen content samples.

The Labtron Kjeldahl Analyzer is built with durable construction and features an easy-to-read LCD display, making it user-friendly and practical for routine lab work. Its advanced safety features protect both the operator and the equipment during use. The device uses both tap water and distilled water for operation and consumes around 3 liters per minute of cooling water (with temperature less than 20°C). With a distillation power of 1000W, it completes the distillation process in about 5 to 15 minutes, making it efficient for busy labs.

The analyzer is designed to operate with a standard AC 220V, 50Hz power supply and consumes about 1000W of power during operation. It has a compact footprint with dimensions of 380mm × 320mm × 670mm, making it suitable for labs with limited bench space. The device weighs around 20 kg, which allows for stable operation while still being portable enough for relocation within the lab if needed.