Air Jacketed CO<sub>2</sub> Incubator LAJI-C21

Air Jacketed CO2 Incubator LAJI-C21

Air Jacketed CO2 Incubator LAJI-C21 is a cooling and shaking incubator comprising single orbital platform with triple eccentric shaft balance drive, offers 40 to 300 rpm of speed. Adopted with six sides direct heating, auto-adjustable cycle fan speed, door heating system, and compressor this incubator offers continuous operation within 0 to 5999 min and 4 to 65°C of temperature range. Fluorine-free design with 304 stainless steel chamber, shelves, and platform with round curved corners, it is a load bearing structure provide excellent durability and performance. Equipped with IR sensor, color touch screen controller, password lock function, 90° high temperature and sterilization system, it has unique air duct design. With CO2 concentration sensor, advanced alarm system, temperature control and monitoring system, Micro-biological & HEPA filter this incubator ensures controlled, uniform and stable conditions.

Request Quote
CO2 range 0-20%
CO2 recover time (Return to 5% after opening the door for 30 seconds) ≤3 mins
CO2 control accuracy ±0.1%
CO2 stability of 5%CO2 ±0.1%
CO2 uniformity ±0.1%
CO2 sensor IR CO2 sensor
Shaking frequency 40 to 300 rpm
Drive way Three eccentric shaft balance drive type
Humidity control 50 to 90% RH
37°C humidity control accuracy 85% to 95% RH
Humidity resolution 0.001
Humidity deviation ±2%
Allowable shaking load 15 kg
Temperature control range 4 to 65° C
Temperature uniformity ±0.5° C (test point at 37°C)
Ambient temperature 25°C
Heating method 6 side direct heating
Sterilization method 90˚ C moist heat sterilization
Timing range 0 to 5999 min
Platform movement Orbital
Platform size (L×B) 450×450 mm (1pc)
Shelf 3 pcs
Display Colorful touch screen controller
Sterilization system 90° high temp. high humidity sterilization system
Filter Microbiological and HEPA filter
Motor Low heat rejection brushless DC motor
Interface RS485
Alarm system Temperature deviation, over temperature, high/low speed, door open, high/low CO2 condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop
Orbital diameter 20 mm+AO2
Interior dimension (W×D×H) 605×700×520 mm
Exterior dimension (W×D×H) 793×975×853 mm
Gross Weight 98 kg (approx.)
Power 1800 W
Voltage 220V 50Hz
Flask Configuration 50 ml×36, 100 ml×23, 250 ml×13, 500 ml×8, 1 L×5, 2 L×3, 4 L×1, 5 L×1
  • CO2 cooling and shaking incubator with air jacketed configurations
  • Single orbital platform with triple eccentric shaft balance drive
  • 6 sides direct heating with auto-adjustable cycle fan speed
  • Door heating system at outer door and large toughened inner glass door for observation
  • Continuous operation within 0 to 5999 min and 4 to 65°C of temperature range
  • Fluorine-free design with 304 stainless steel chamber, shelves, and platform with round curved corners
  • Low heat rejection brushless DC motor with high start torque
  • CO2 control and monitoring system with IR sensors
  • Pollution proof control with Micro-biological & HEPA filter
  • 90° high temperature and sterilization system for thoroughly sterilization of chamber
  • Large color touch screen controller with password lock function
  • Unique air duct design with high quality compressor
  • Load bearing structure provide excellent durability and performance
  • Alarm system: Temperature deviation, over temperature, high/low speed, door open, high/low CO2 condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop
  • High- efficiency, with low power consumption

Air Jacketed CO2 Incubator are used for tissue engineering, cell culture, in vitro fertilization, diagnostics, neuroscience, cancer research and for developing biosensors across medical research, pharmaceutical industry, scientific research, laboratories, etc.

Similar Products

Related Sub-Category


Air-jacketed CO2 Incubator : Labtron Air-jacketed Incubators with precise control of temperature and CO2 provides an exceptionally stable environment. They come with different chamber volumes.
Air Jacketed CO2 Incubator LAJI-C10, Air Jacketed CO2 Incubator LAJI-C11, Air Jacketed CO2 Incubator LAJI-C12, Air Jacketed CO2 Incubator LAJI-C13, Air Jacketed CO2 Incubator LAJI-C20, Air Jacketed CO2 Incubator LAJI-A10, Air Jacketed CO2 Incubator LAJI-A11, Air Jacketed CO2 Incubator LAJI-A12, Air Jacketed CO2 Incubator LAJI-B10, Air Jacketed CO2 Incubator LAJI-B11, Air Jacketed CO2 Incubator LAJI-B12, Air Jacketed CO₂ Incubator LAJI-D10, Air Jacketed CO₂ Incubator LAJI-C14, Air-Jacketed CO₂ Incubator LAJI-E10, Air Jacketed CO₂ Incubator LAJI-B13, and more.

Quick Links : About Us, Contact Us, Career, Terms of Use, Policies, Sitemap, Gallery.

Need a Product

send details for best price quotation

Click
For

Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608

Copyright © 2024 Labtron Equipment Ltd. All rights reserved.