ICP spectrometer LICP-A10

Name: ICP spectrometer LICP-A10
Brand: Labtron
SKU: LICP-A10
Rating: 4.8 (957 reviews)

ICP spectrometer LICP-A10 detects trace elements using argon plasma where the atomized liquid sample is injected. With an analyzing rate of 26 elements per minute results can be achieved with lower levels of detection and measurement of trace and ultra-trace elements. Elements can be traced from liquid and solid samples. Detection of liquid flow from the spray chamber by optical drain sensor offers exceptional sensitivity and accuracy.

Request Quote

Wavelength range ( 3600 lines / mm )	180 to 500 nm
Wavelength range ( 2400 lines / mm )	180 to 800 nm
Temperature	20 ~ 28 °C
Elements per minute	26 elements
Humidity	70%
Focal length	1000 mm
Standard deviation	RSD ≤ 1.0 %
Correlation coefficient	≥ 0.9998
Gas source	Argon ( 99.99 % )
Plasma gas flow meter	100 ~ 1000 L / h
Auxillary gas flow meter	10 ~ 100 L / h
Carrier gas flow meter	10 ~ 100 L / h
Cooling water flow rate	5 liters per min
Cooling water temperature	21 ~ 26 °C
Water outlet diameter	Ø 10 mm
Line dispersion rate	0.26 nm
Resolving power	≤ 0.008 nm
Incident slit	20 µm
Co-axial sprayer diameter	6 mm
Coil diameter	25 mm ( 3 turn )
Double room fog diameter	34 mm
Quartz tube torch diameter	20 mm
Mirror dimensions	78 x 105 x 16 mm

Scanning range variance ( 190 nm to 500 nm / 190 nm to 800 nm )
Rapid analysis – 26 elements per minute
Temperature range – 20 to 28 °C
Optical pathway – Czerny-turners
Low detection limit
Detection of multi-elements including non-metallic
Single and multi-element measurement method
Indication for wavelength error and repeatability
Range of measurement – common to trace

Used in clinical analysis for detection of metals in biological fluids , environmental analysis for trace element detection in water , soil , plants , pharmaceuticals for traces of catalysts and poison metals like Cd , Pb , industries for noble metal detection

Element	Be	Mg	Ca	Sr	Ba	Sc	Y	Eu	Yb
Wavelength ( nm )	313.042	279.553	393.366	407.771	455.403	335.373	371.03	381.967	369.419
Detection limit	< 1.0	< 1.0	< 1.0	< 1.0	< 1.0	< 1.0	< 1.0	< 1.0	< 1.0

Element	Lu	La	Gd	Dy	Ho	Er	Tm	Zn	Cd
Wavelength ( nm )	261.542	333.749	342.247	353.17	345.6	337.271	313.126	213.856	226.502
Detection limit	< 1.0	< 3.0	< 3.0	< 3.0	< 3.0	< 3.0	< 3.0	< 3.0	< 3.0

Element	Fe	Ti	Cu	Mn	V	B	Ni	Cr	Co
Wavelength ( nm )	239.562	344.941	324.754	257.61	309.311	249.773	221.647	205.552	238.204
Detection limit	< 3.0	< 3.0	< 3.0	< 3.0	< 3.0	< 5.0	< 5.0	< 5.0	< 5.0

Element	Zr	Mo	Ag	Au	Si	Al	Ir	P	Hg
Wavelength ( nm )	343.823	202.03	328.068	242.795	251.611	396.152	224.268	213.618	194.227
Detection limit	< 5.0	< 5.0	< 5.0	< 5.0	< 5.0	< 10.0	< 10.0	< 10.0	< 10.0

Download catalog for
ICP spectrometer LICP-A10 Catalog

ICP Spectrometer LICP-A12

Wavelength range : 195 to 800 mm
Elements per minute : 10 elements
Temperature range : 32 °C
Incident slit : 20 µm

Compare Remove

ICP Spectrometer LICP-B10

Monochromator Specifications : Optical typeCzerny turnerResolution≤ 0.015nm (3600 line grating) ≤ 0.030nm (2400 line grating)Focal length1000 mmGrating specificationshuge holographic grating with 3600 L/mil or 2400 L/mil and 80 mm × 100 mm of ruling areaWavelength range195 to 500 nm for 3600 line grating 195 to 800 nm for 2400 line grating
Solid State Power Specifications : Frequency27.12 MHz Frequency stability: < 0.05%Spray chamberScott double pass spray chamberOutput power800 W to 1600 W, adjustable with power efficiency more than 65%Output power stability≤ 0.05%Induction coil25 mm × 3 ID (ID-internal diameter), equipped with three concentric quartz torch tubes 35 mm ED (ED-external diameter)
Technical Specifications : Suitable sample content rangeLiquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%Repeatabilityshort-term stability- RSD ≤ 1.5% Long-term stability: RSD ≤ 2%Test speed5 to 8 elements / minLimits of detection (LOD, µg/L) for most elements1ppb to 10ppb
Control Circuit : Photomultiplier tube specificationR212 / R928Negative high voltage-50 to -1000 VCircuit measuring range(10-12 to 10 -4) ASignal acquisitionVF conversion

Compare Remove

ICP Optical Emission Spectrometer LICP-C10

Wavelength Range : 165 to 950 nm
Observation Design : Radial and axial observation for element measurement from sub-ppm to high content
Optical Path Structure : Echelle grating and prism cross-dispersion with ultra-pure SiO2 prism
Imaging Quality : Optimized design with aspherical optical elements