ICP Optical Emission Spectrometer LICP-C10

Name: ICP Optical Emission Spectrometer LICP-C10
Brand: Labtron
SKU: LICP-C10
Rating: 4.8 (765 reviews)

ICP Optical Emission Spectrometer LICP-C10 operates over a wavelength range of 165 to 950 nm. It features a dual observation design, allowing for both radial and axial measurements. The sampling systems are optimized for organic solvents, high-salt, and complex matrix samples, ensuring accurate analysis in challenging conditions. A mass flow controller of our ICP optical emission spectrometer regulates the flow of cooling, auxiliary, and carrier gases to ensure optimal performance and efficiency in various applications.

Request Quote

Wavelength Range	165 to 950 nm
Observation Design	Radial and axial observation for element measurement from sub-ppm to high content
Optical Path Structure	Echelle grating and prism cross-dispersion with ultra-pure SiO2 prism
Imaging Quality	Optimized design with aspherical optical elements
Light Chamber Technology	Multi-point filling for faster operation
Gas Path	Independent gas path for nitrogen or argon
Spectroscopic System	Medium-step 2D optical system with 400 mm focal length
Grating Specifications	Echelle grating, 100 × 50 mm
Stray Light	Equivalent background concentration < 2 μg/ml at As 189.042 nm
Temperature Control	38 ± 0.1℃
Detector Type	Large-area CCD, full-spectrum response, high UV quantization efficiency
Detector Pixel	1024 × 1024 pixels, 24 × 24 μm pixel area
Detector Working Temperature	< -40℃, stabilization time < 3 minutes
Detector Quantization Efficiency	> 75% without coating
Type	All-solid-state RF generator
RF Generator Cold Cone Tail Flame Technology	Minimizes self-absorption and ionization interference
RF Generator Power Output	700W to 1600W, continuously adjustable by 1W
RF Generator Power Stability	≤ 0.1%
RF Generator Oscillation Frequency	27.12 MHz
RF Generator Frequency Stability	≤ 0.01%
RF Generator Electromagnetic Field Leakage	< 0.5 V/m
Sampling Systems	Optimized for organic solvents, high-salt/complex matrix samples
Feedback Diverter System	Two-inlet and six-out waterway for better control
Peristaltic Pump	4-channel, 12-roller with adjustable speed
Argon Gas Consumption	8 L/min to 18 L/min
Cooling Gas	0.00 L/min to 20.00 L/min, accuracy 0.01 L/min
Auxiliary and Carrier Gas	0.00 L/min to 2.00 L/min, accuracy 0.01 L/min
Multi-Method Analysis	Supports simultaneous measurement, editing, and viewing
Spectral Line Library	> 70,000 spectral lines, intelligent interference prompts
Method Support	Standard curve and standard addition methods, multiple data processing methods
Report Output	Multiple formats available
Liquid Content Range	0.01 ppm to several thousand ppm
Solid Content Range	0.001% to 70%
Repeatability	RSD < 1%
Stability	RSD < 1.5% @ 2 hrs
Element Detection Limit	1 to 10 ppb for most elements
Storage and Transportation Temperature	5℃ to 40℃
Storage Relative Humidity	≤ 85%
Atmospheric Pressure	86 to 106 kPa
Working Humidity	≤ 70%
Working Temperature	15℃ to 30℃
Power Supply	220 ± 22 VAC, 50 ± 1 Hz
Dimension	1270 × 720 × 850 mm
Packaging Dimension	1500 × 900 × 1060 mm
Net Weight	192.4 Kg
Gross Weight	249.5 Kg

Echelle grating
High UV quantization
Multiple output formats
Multi-Method Analysis
User friendly
19” LCD monitor
Laser Printer

ICP Optical Emission Spectrometer LICP-C10 is used to analyze trace elements in substances soluble in nitric, hydrochloric, and hydrofluoric acids, in fields like environmental protection, petroleum, rare earths, semiconductors, geology, metallurgy, clinical medicine, food safety, forensics, and agriculture.

Cable × 1 line Plastic drum × 1 piece Argon Gas Reduction × 2 piece PU tube 30 m × 1 piece PU tube 10 m × 1 piece PVC transparent tube × 1 meter Plug × 1 piece Ground copper braided wire × 15 lines Brass tube × 1 piece Filter Cartridge × 4 pieces Torch pipe × 2 pieces Double cylinder fog chamber × 2 pieces Atomizer × 1 piece Inner tube × 1 meter Peristaltic pump injector tube × 3 lines Fuse wire in tube shape × 2 lines Fuse wire in tube shape × 2 lines Cylindric atomizer × 2 pieces Silicone tube × 0.3 meter AR filter × 2 pieces AR filter × 4 pieces Screw (GB/T 823-1988) × 6 pieces Flat gasket (GB/T 97.1-2002) × 6 pieces Ball clamp × 1 piece O shape seal ring × 2 pieces O shape seal ring × 4 pieces Connector × 2 pieces Teflon tape × 1 roll Self-sealing bag × 3 pieces

S. No	Accessory Name	Quantity
1	Ethernet Cable	1pc
2	Plastic Bucket	1pc
3	Power cable	1pc
4	Earth Copper Braid Wire	1pc
5	Filter Tank Catridge	1pc
6	Electronic Fuses	1pc
7	Ball Joint Clamp	1pc
8	Cross Recessed Small Pan Head Screw	1 Bag
9	Flat Pad	1 Bag
10	Raw Material Strip	1 Roll
11	Self Sealing Pocket	1 pc
12	O Type Sealing Ring	1 pc
13	Silicon Tube	1 pc
14	Ground Rod	1 pc
15	Capillary Feed Tube	1pc
16	PU Hose	1pc
17	PVC Transparent Hose	1pc
18	Peristalic Pump Head Hose	1pc
19	Hose Adapter	1pc
20	Quick Coupling	1pc
21	Dual Cylinder Type Spray Chamber	1pc
22	Cylindrical Fog Chmaber Cover	1 pc
23	High Frequency Coil	1pc
24	Torch Tube	1pc
25	Atomizer	1pc
26	Atomizer Injector Tube	1 pc
27	Autosampler	1set
28	Argon Pressure Reducing Valve	1pc

Download catalog for
ICP Optical Emission Spectrometer LICP-C10 Catalog

Available Range :

ICP Optical Emission Spectrometer LICP-C11 : 160 to 1000 nm ICP Optical Emission Spectrometer LICP-C10 : 165 to 950 nm ICP Spectrometer LICP-A11 : 180 to 900 nm ICP Spectrometer LICP-A12 : 195 to 800 mm

Models of ICP Spectrometer

Labtron ICP Spectrometer are designed for the detection and analysis of trace and ultra-trace elements. They use advanced argon plasma technology to efficiently measure multiple elements per minute. Each unit has a highly sensitive detection system with low detection limits, providing accurate results for both liquid and solid samples. Equipped with Czerny-Turner optical pathways, these spectrometer provide exceptional optical resolution and stability. They feature advanced control systems for improved signal-to-background ratios. Our ICP Spectrometer comes with dual verniers for error reduction and optical drain sensors for enhanced sensitivity and accuracy.

ICP spectrometer LICP-A10

Wavelength range ( 3600 lines / mm ) : 180 to 500 nm
Wavelength range ( 2400 lines / mm ) : 180 to 800 nm
Temperature : 20 ~ 28 °C
Elements per minute : 26 elements

Compare Remove

ICP Spectrometer LICP-B10

Monochromator Specifications : Optical typeCzerny turnerResolution≤ 0.015nm (3600 line grating) ≤ 0.030nm (2400 line grating)Focal length1000 mmGrating specificationshuge holographic grating with 3600 L/mil or 2400 L/mil and 80 mm × 100 mm of ruling areaWavelength range195 to 500 nm for 3600 line grating 195 to 800 nm for 2400 line grating
Solid State Power Specifications : Frequency27.12 MHz Frequency stability: < 0.05%Spray chamberScott double pass spray chamberOutput power800 W to 1600 W, adjustable with power efficiency more than 65%Output power stability≤ 0.05%Induction coil25 mm × 3 ID (ID-internal diameter), equipped with three concentric quartz torch tubes 35 mm ED (ED-external diameter)
Technical Specifications : Suitable sample content rangeLiquid sample: 0.01 ppm to several thousand ppm Solid or power sample: 0.001% to 70%Repeatabilityshort-term stability- RSD ≤ 1.5% Long-term stability: RSD ≤ 2%Test speed5 to 8 elements / minLimits of detection (LOD, µg/L) for most elements1ppb to 10ppb
Control Circuit : Photomultiplier tube specificationR212 / R928Negative high voltage-50 to -1000 VCircuit measuring range(10-12 to 10 -4) ASignal acquisitionVF conversion