ICP Optical Emission Spectrometer LICP-C10 operates over a wavelength range of 165 to 950 nm. It features a dual observation design, allowing for both radial and axial measurements. The sampling systems are optimized for organic solvents, high-salt, and complex matrix samples, ensuring accurate analysis in challenging conditions. A mass flow controller of our ICP optical emission spectrometer regulates the flow of cooling, auxiliary, and carrier gases to ensure optimal performance and efficiency in various applications.
| Wavelength Range | 165 to 950 nm |
| Observation Design | Radial and axial observation for element measurement from sub-ppm to high content |
| Optical Path Structure | Echelle grating and prism cross-dispersion with ultra-pure SiO2 prism |
| Imaging Quality | Optimized design with aspherical optical elements |
| Light Chamber Technology | Multi-point filling for faster operation |
| Gas Path | Independent gas path for nitrogen or argon |
| Spectroscopic System | Medium-step 2D optical system with 400 mm focal length |
| Grating Specifications | Echelle grating, 100 × 50 mm |
| Stray Light | Equivalent background concentration < 2 μg/ml at As 189.042 nm |
| Temperature Control | 38 ± 0.1℃ |
| Detector Type | Large-area CCD, full-spectrum response, high UV quantization efficiency |
| Detector Pixel | 1024 × 1024 pixels, 24 × 24 μm pixel area |
| Detector Working Temperature | < -40℃, stabilization time < 3 minutes |
| Detector Quantization Efficiency | > 75% without coating |
| Type | All-solid-state RF generator |
| RF Generator Cold Cone Tail Flame Technology | Minimizes self-absorption and ionization interference |
| RF Generator Power Output | 700W to 1600W, continuously adjustable by 1W |
| RF Generator Power Stability | ≤ 0.1% |
| RF Generator Oscillation Frequency | 27.12 MHz |
| RF Generator Frequency Stability | ≤ 0.01% |
| RF Generator Electromagnetic Field Leakage | < 0.5 V/m |
| Sampling Systems | Optimized for organic solvents, high-salt/complex matrix samples |
| Feedback Diverter System | Two-inlet and six-out waterway for better control |
| Peristaltic Pump | 4-channel, 12-roller with adjustable speed |
| Argon Gas Consumption | 8 L/min to 18 L/min |
| Cooling Gas | 0.00 L/min to 20.00 L/min, accuracy 0.01 L/min |
| Auxiliary and Carrier Gas | 0.00 L/min to 2.00 L/min, accuracy 0.01 L/min |
| Multi-Method Analysis | Supports simultaneous measurement, editing, and viewing |
| Spectral Line Library | > 70,000 spectral lines, intelligent interference prompts |
| Method Support | Standard curve and standard addition methods, multiple data processing methods |
| Report Output | Multiple formats available |
| Liquid Content Range | 0.01 ppm to several thousand ppm |
| Solid Content Range | 0.001% to 70% |
| Repeatability | RSD < 1% |
| Stability | RSD < 1.5% @ 2 hrs |
| Element Detection Limit | 1 to 10 ppb for most elements |
| Storage and Transportation Temperature | 5℃ to 40℃ |
| Storage Relative Humidity | ≤ 85% |
| Atmospheric Pressure | 86 to 106 kPa |
| Working Humidity | ≤ 70% |
| Working Temperature | 15℃ to 30℃ |
| Power Supply | 220 ± 22 VAC, 50 ± 1 Hz |
| Dimension | 1270 × 720 × 850 mm |
| Packaging Dimension | 1500 × 900 × 1060 mm |
| Net Weight | 192.4 Kg |
| Gross Weight | 249.5 Kg |
ICP Optical Emission Spectrometer LICP-C10 is used to analyze trace elements in substances soluble in nitric, hydrochloric, and hydrofluoric acids, in fields like environmental protection, petroleum, rare earths, semiconductors, geology, metallurgy, clinical medicine, food safety, forensics, and agriculture.
Cable × 1 line Plastic drum × 1 piece Argon Gas Reduction × 2 piece PU tube 30 m × 1 piece PU tube 10 m × 1 piece PVC transparent tube × 1 meter Plug × 1 piece Ground copper braided wire × 15 lines Brass tube × 1 piece Filter Cartridge × 4 pieces Torch pipe × 2 pieces Double cylinder fog chamber × 2 pieces Atomizer × 1 piece Inner tube × 1 meter Peristaltic pump injector tube × 3 lines Fuse wire in tube shape × 2 lines Fuse wire in tube shape × 2 lines Cylindric atomizer × 2 pieces Silicone tube × 0.3 meter AR filter × 2 pieces AR filter × 4 pieces Screw (GB/T 823-1988) × 6 pieces Flat gasket (GB/T 97.1-2002) × 6 pieces Ball clamp × 1 piece O shape seal ring × 2 pieces O shape seal ring × 4 pieces Connector × 2 pieces Teflon tape × 1 roll Self-sealing bag × 3 pieces
S. No | Accessory Name | Quantity |
1 | Ethernet Cable | 1pc |
2 | Plastic Bucket | 1pc |
3 | Power cable | 1pc |
4 | Earth Copper Braid Wire | 1pc |
5 | Filter Tank Catridge | 1pc |
6 | Electronic Fuses | 1pc |
7 | Ball Joint Clamp | 1pc |
8 | Cross Recessed Small Pan Head Screw | 1 Bag |
9 | Flat Pad | 1 Bag |
10 | Raw Material Strip | 1 Roll |
11 | Self Sealing Pocket | 1 pc |
12 | O Type Sealing Ring | 1 pc |
13 | Silicon Tube | 1 pc |
14 | Ground Rod | 1 pc |
15 | Capillary Feed Tube | 1pc |
16 | PU Hose | 1pc |
17 | PVC Transparent Hose | 1pc |
18 | Peristalic Pump Head Hose | 1pc |
19 | Hose Adapter | 1pc |
20 | Quick Coupling | 1pc |
21 | Dual Cylinder Type Spray Chamber | 1pc |
22 | Cylindrical Fog Chmaber Cover | 1 pc |
23 | High Frequency Coil | 1pc |
24 | Torch Tube | 1pc |
25 | Atomizer | 1pc |
26 | Atomizer Injector Tube | 1 pc |
27 | Autosampler | 1set |
28 | Argon Pressure Reducing Valve | 1pc |
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
