Gas Chromatography LGC-B11

Name: Gas Chromatography LGC-B11
Brand: Labtron
SKU: LGC-B11
Rating: 4.8 (825 reviews)

Gas Chromatography LGC-B11 is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes. GC oven is capable of 9 temperature program ramps and hold steps, and features rapid cooling: 250 °C to 50 °C < 10 minutes. Accurate flow rate control via AFC has higher level repeatability of retention time and peak area, enabling specific level of analysis by means of dual FID detectors.

Request Quote

Oven

Maximum capacity	22 L
Temperature range	RT + 5 ℃ to 400 ℃
Temperature accuracy	± 0.1 ℃
Temperature program	9 Step
Program total time	9999.9 min
Maximum Heating Rate	0.1 to 60 ℃/ min
Maximum Cooling Rate	≤ 10 mins (250 to 50 ℃)

Sample injector

Temperature range	RT+ 7 ℃ to 420 ℃
Temperature control	Independent
Injector type	Column or split
Maximum sample inlet	3 pcs
Carrier gas flow type	Constant pressure
Pressure range	0 to 400 kPa
Pressure accuracy	0.1 kPa
Mobile phase flow range	H2: 0 to 200 ml/min, N2: 0 to 150 ml/min

Detector

Type	FID or TCD
Temperature range	RT + 7 ℃ to 420 ℃
Maximum installation	Dual detector
Flame ignition mode	Automatic
Flame Ionization Detector (FID)	Logarithmic amplifier High voltage switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10-13 Dynamic range: 10 ⁷ RSD: ≤ 3 %
Thermal Conductivity Detector(TCD)	Sensitivity : 8000mV.ml/mg (Sample: n-hexadecane) Baseline noise: ≦0.5mV Baseline draft: ≤ 0.15 mV/30 min Dynamic range: 10 ⁵

Power supply

AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W

Packing dimension

1020 × 660 × 740 mm

Gross Weight

82 kg

Net weight

70 kg

7-inch LCD display specifies temperature, gas flow and heating curve
H2 and N2 mobile gas phase with AFC and constant pressure gas flow type
Equipped with capillary analysis system and capillary split sampler
Injection system incorporates diaphragm cleaning, split flow and auxiliary gas adjustment
Standard unit for high-speed analysis with polar capillary column
PEG-20M and FFAP stationary phase polar capillary columns can be coupled
Dual FID detector with automatic flame ignition and baseline signal display
Self-diagnostic and automatic fault recognition function
Multi-core and 32-bit embedded hardware system ensures the reliable operation
Equipped with chromatography workstation software to process data
Memory function can store 20 sample test data
RS232 interface and LAN port

Suitable for analysis of trace toxic compounds, monitoring and research in environmental protection, atmosphere and water source pollution. It is widely used for petrol-chemistry, environmental protection, epidemic prevention, pharmacology and scientific research.

Accessories no	Accessories name
1.	FID detector system
2.	Capillary injection system
3.	Chromatography workstation software

Accessories no	Accessories name
1	Polar capillary columns PEG-20M Stationary phase: 30 m × 0.32 mm injector temperature: 250 ℃ Oven temperature: 165 ℃ Detector: FID- 250 ℃ Inlet pressure: 0.04 Mpa
2	Polar capillary columns FFAP Stationary phase: 30 m × 0.32 mm Injector temperature: 250 ℃ Oven temperature: 165 ℃ Detector: FID- 250 ℃ Inlet pressure: 0.04 Mpa
3	Syringe 1 ul
4	Syringe 5 ul

Download catalog for
Gas Chromatography LGC-B11 Catalog

Download manual for
Gas Chromatography LGC-B11 Manual

Models of Gas Chromatography (GC)

Labtron gas chromatography models are benchtop units designed for precise chemical analysis. They have advanced flow controllers, large LCD displays, gas flow, heating curves, and digital control modes. They can accommodate capillary and packed column systems with their huge oven capacity and quick temperature programming. These include automated flame lighting, self-diagnostic features, and twin FID detectors. These devices provide effective data processing and internet access for simple data transfer. Our GC models are built with sturdy construction, thermal insulation, and multi-phase temperature programming to provide precise and dependable analysis.