Charpy/ Izod Impact Tester TCI-A10

Name: Charpy/ Izod Impact Tester TCI-A10
Brand: Labtron
SKU: TCI-A10
Rating: 5 (785 reviews)

Charpy/ Izod Impact Tester TCI-A10 comes with LCD digital display, pendulum design which concentrates energy at the impact point with minimum energy loss which occurs due to vibrations. It comes with broad range of measurement methods like test for split strength, impact intensity, fore elevation, ascending angle, statistics function, and automatic correction energy loss. With high precision & performance this charpy/ Izod Impact Tester is complied in accordance with ISO 179 for charpy, ISO 180, ASTM D256 for Izod test methods.

Request Quote

Impact Speed & Energy (charpy)	2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Impact energy (Izod)	3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Resolution of impact energy	0.001 J
Pendulum up angle	160°
Impact center distance (Charpy)	221 mm for 1J, 2J, 4J, 5J & 380 mm 7.5J, 15J, 25J
Impact center distance (Izod)	322 mm
Charpy distance between the clamps	40 mm, 60 mm, 70 mm, 95 mm
Radius of striking edge (IZOD)	0.8 mm
Radius of striking edge (Charpy)	2.0 mm
Distance between jaw & impact edge:	22mm
Dimension	460×330×745 mm
Weight	190 kg
Power	110V/ 220V , 60Hz/ 50Hz

Innovative design impact tester used for both Izod and Charpy test
Adopted with LCD digital display to view measuring circle angle
Pendulum up angle 160°
Precise impact speed and center distance values for Charpy & Izod materials
Resolution of impact energy 0.001 J
Can be connected to mini printer to print results

It is used to test plastic sheets, glass-steel sheets, plastic pipe & other non-metallic materials sheets or insulators of plastic for anti-impact, anti- charpy intensity.

Download catalog for
Charpy/ Izod Impact Tester TCI-A10 Catalog

Download manual for
Charpy/ Izod Impact Tester TCI-A10 Manual

Available Range :

Charpy/ Izod Impact Tester TCI-A10 : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J

Vacuum Leak Tester LVLT-A10

Vacuum Degree : 0 to slightly less than -90 kPa (conventional barrel)
Vacuum Accuracy : ± 1%
Vacuum Holding Time : 99.99 h
Inlet Pressure : 0.5 to 0.65 MPa

Compare Remove

Heat sealer THS-A10

Seal temperature : Room temperature -250°C
Control accuracy : ± 0.2°C
Dwell time : 0.1 S to 999.9 S
Dwell pressure : 0.05 to 0.7 MPa

Compare Remove

Melt flow Indexer TMFI-A11

Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Measuring rate : 0.001 S
Temperature range : 50 to 400°C
Temperature precision : ± 0.5°C