Falling Weight Impact Tester TFWT-A10

Name: Falling Weight Impact Tester TFWT-A10
Brand: Labtron
SKU: TFWT-A10
Rating: 4.9 (841 reviews)

Falling Weight Impact Tester TFWT-A10 operates within a temperature range of 10 to 35°C and allows a maximum falling height of 2000 mm. It determines the impact resistance of plastic sheets, pipes, and fittings under specified conditions using a falling weight. This tester is built with a double pipe structure for enhanced stability. The advanced design ensures reliable and repeatable test results. Our impact tester ensures precise height adjustment and hammer control for accurate testing.

Request Quote

Temperature Range	10 to 35°C
Maximum Falling Height	2000 mm
Resolution Of Displacement	1 mm
Height Error	< ± 2 mm
Hammer Mass	0.25 to 16 kg
Noses Of Strikers	d25 to d90
Power Supply	AC 220 V +/- 10 %, 50 Hz single phrase
Dimension	730 × 700 × 3600 mm
Net Weight	300 kg

PLC-controlled system
Digital touch screen
Pneumatic technology
High capture rate
Adjustable hammer mass

Falling Weight Impact Tester TFWT-A10 is widely used in quality control and research laboratories to evaluate the impact resistance of plastic sheets, pipes, and fittings. It ensures product durability and compliance with industry standards.

Download catalog for
Falling Weight Impact Tester TFWT-A10 Catalog

Available Range :

Falling Weight Impact Tester TFWT-A10 : 10 to 35°C Melt flow Indexer TMFI-A10 : 50 to 400°C HDT and Vicat Testing Machine TVHT-A10 : RT to 300℃

Models of Plastic Testing Instruments

Labtron Plastic Testing Instruments has a microprocessor-controlled PID system that ensures precise temperature balance for consistent results. These include an inside chamber constructed from durable stainless steel, offering long-lasting reliability. Their test samples retain their physical properties even after aging, ensuring accurate assessments. They have adopted a double-pipe structure for enhanced durability and performance. Our plastic testing instruments effectively determine the anti-impact properties of materials, providing valuable data for material testing and quality control.

Melt flow Indexer TMFI-A11

Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Measuring rate : 0.001 S
Temperature range : 50 to 400°C
Temperature precision : ± 0.5°C

Compare Remove

Heat Seal Tester LHST-A10

Heat Sealing Temperature : RT to 300℃
Temperature Control Accuracy : ± 1℃
Heat Sealing Time : 0.01 s to 99.99 h
Heat Sealing Pressure : 0 to 8 kg (0 to 0.8 MPa)

Compare Remove

Oxygen Index Tester TOIT-A10

Resolution : 0.1 % O2
Measuring range : 0 to 100 % O2
Precision : ± 0.4 % O2
Response time : < 10 S

Compare Remove

Primary adhesive tester TPAT-A10

Inclined adjustable angle : 0 to 40°
Panel width : 120 mm
Test area width : 80 mm
Standard steel balls : 1/32 to 1 inch

Compare Remove

Melt Flow Indexer LMTF-A10

Temperature Control Range : 0℃ to 450℃
Temperature Resolution : 0.1℃
Temperature Fluctuation : ± 0.2℃
Temperature Uniformity : ± 1℃

Compare Remove

Vacuum Leak Tester TVLT-A10

Vacuum degree : 0 to 90 KPa
Accuracy : 1 % FS
Resolution : 0.1 KPa
Vacuum chamber effective size : 270 × 210 mm

Compare Remove

Melt flow Indexer TMFI-A10

Measuring range : 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
Measuring rate : 0.001 S
Temperature range : 50 to 400°C
Temperature precision : ± 0.5°C