Primary adhesive tester TPAT-A10

Name: Primary adhesive tester TPAT-A10
Brand: Labtron
SKU: TPAT-A10
Rating: 4.8 (985 reviews)

Primary adhesive tester TPAT-A10 is based on principles of inclined surface rolling ball tack method to form a bond with surface of another material upon brief contact under virtually no pressure. It is widely used in paper & plastic industry for packaging & other purpose. The adjustable inclined angle of this adhesive tester, can be adjusted freely to meets requirements of the users.

Request Quote

Inclined adjustable angle	0 to 40°
Panel width	120 mm
Test area width	80 mm
Standard steel balls	1/32 to 1 inch
Dimension (LWH)	320×140×180 mm
Net weight	6 kg

Designed is in accordance with rolling ball method
Adjustable inclined angle range 0 to 40°
Superior steel balls design
Easy to operate

Primary Adhesive Tester has applications in adhesive tests of pressure sensitive tapes, bandages, plaster, label, films & other products.

Download catalog for
Primary adhesive tester TPAT-A10 Catalog

Models of Plastic Testing Instruments

Labtron Plastic Testing Instruments has a microprocessor-controlled PID system that ensures precise temperature balance for consistent results. These include an inside chamber constructed from durable stainless steel, offering long-lasting reliability. Their test samples retain their physical properties even after aging, ensuring accurate assessments. They have adopted a double-pipe structure for enhanced durability and performance. Our plastic testing instruments effectively determine the anti-impact properties of materials, providing valuable data for material testing and quality control.

Falling Weight Impact Tester TFWT-A11

Maximum Sample Length : 6 inches (152.4mm)
Test Temperature : 23 ℃ ± 2 ℃
Sample Size Range : 16 mm to 152 mm
Anvil Size : 13 mm steel Plate

Compare Remove

Vacuum Leak Tester LVLT-A10

Vacuum Degree : 0 to slightly less than -90 kPa (conventional barrel)
Vacuum Accuracy : ± 1%
Vacuum Holding Time : 99.99 h
Inlet Pressure : 0.5 to 0.65 MPa

Compare Remove

Heat sealer THS-A10

Seal temperature : Room temperature -250°C
Control accuracy : ± 0.2°C
Dwell time : 0.1 S to 999.9 S
Dwell pressure : 0.05 to 0.7 MPa

Compare Remove

Pendulum Impact Tester LIPT-A11

Impact Energy : Standard: 1 J, 2 J, 3 J Customizable: Up to 5 J
Resolution : 0.001 J
Punch Size : Փ 25.4 mm, Փ 12.7 mm
Sample Clamp Diameter : Փ 60 mm, Փ 89 mm

Compare Remove

Melt flow Indexer TMFI-A11

Measuring range : 0.01to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm3/ 10 min (MVR), 0.001 to 9.999 g/ cm3 (melt density)
Measuring rate : 0.001 S
Temperature range : 50 to 400°C
Temperature precision : ± 0.5°C

Compare Remove

Charpy/ Izod Impact Tester TCI-A10

Impact Speed & Energy (charpy) : 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
Impact energy (Izod) : 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
Resolution of impact energy : 0.001 J
Pendulum up angle : 160°