In what types of water samples can Labtron Benchtop Ion meter for Cu, LBIM-A27 be used for cupric ion measurement?

Labtron Benchtop Ion meter for Cu is designed to measure cupric ion concentrations in a wide range of water types. It can be effectively used with potable water, distilled or deionized water, wastewater, and natural water sources like rivers or lakes. This makes it highly suitable for environmental monitoring, laboratory testing, and industrial water quality analysis. It has wide detection range ensuring accurate results in both low and high concentration samples.

How does the auto hold function of Benchtop Ion meter for Cu benefit the user during measurements?

The Benchtop Ion meter for Cu's auto hold function automatically locks the reading once the measurement stabilizes. This helps users avoid recording fluctuating data and makes it easier to note or document precise results. It is useful in research laboratory settings or when multiple samples are being tested. This function also reduces the chances of human error during manual data logging.

What safety features of Benchtop Ion meter for Cu help maintain measurement accuracy over time?

Labtron's Benchtop Ion meter for Cu includes a calibration due reminder that alerts users when recalibration is needed to ensure safe and consistent operation. It also performs automatic electrode diagnostics to check the slope of the sensor and monitor its health. These features prevent inaccurate readings caused by electrode degradation. Regular prompts and diagnostics promote timely maintenance and calibration for long-term accuracy.

How does the Benchtop Ion meter for Cu assist with regular maintenance of the ion selective electrode?

The Benchtop Ion meter for Cu allows users to check electrode performance using the mV measurement mode. This helps identify if the electrode's response is weakening or drifting from expected values. Users can detect when the electrode may need cleaning or replacement by evaluating the slope. Regular monitoring like this extends the life of the electrode and ensures reliable measurements.

Is the Benchtop Ion meter for Cu easy to use for beginners or non-experts?

Yes, our Benchtop Ion meter for Cu is designed with a large LCD screen for effective monitoring. It features a smart system menu with eight adjustable parameters, such as calibration points and stability settings. The direct ion concentration readout simplifies the process, so even users without technical knowledge can operate it confidently. It offers both manual and automatic modes of shutdown and temperature compensation to suit different skill levels.

Can data of Benchtop Ion meter for Cu be easily stored and transferred for reporting?

Yes, the Benchtop Ion meter for Cu includes built-in memory that can store up to 500 sets of data. Each entry is time-stamped using a real-time clock, making it ideal for regulatory compliance and recordkeeping. The USB interface allows quick data transfer to a computer for further analysis or reporting. This ensures efficient workflow in labs, research institutions, and quality control departments.

Benchtop Ion Meter For Cu, LBIM-A27

Name: Benchtop Ion Meter For Cu, LBIM-A27
Brand: Labtron
SKU: LBIM-A27
Rating: 4.7 (747 reviews)

Benchtop Ion meter for Cu, LBIM-A27 comes with (Cu) cupric ion selective electrode for cupric ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Request Quote

Ion measurement range	Cu range: 1×10⁸ - 1M, 0.06-6400 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Benchtop Ion meter is used to measure the cupric ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Cu Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter

Ion selective electrode: Cu range: 1×10⁸ - 1M, 0.06-6400 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor

Download catalog for
Benchtop Ion Meter For Cu, LBIM-A27 Catalog

Available Range :

Benchtop Ion Meter For NO LBIM-C15

Test Parameters : pH/ISE/Temp. (mV/pX)
pH Range : -2.00 to 20.00 pH
pH Resolution : 0.1, 0.01 pH
pH Accuracy : ±0.01 pH

Compare Remove

Benchtop Ion Meter For Cl, LBIM-A10

Ion measurement range : Cl range: 5 × 106 - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy : ± 0.5 % F.S.
Resolution : 0.001, 0.01, 0.1, 1
Calibration points : 2 to 5 points

Compare Remove

Benchtop Ion Meter For Ca, LBIM-A13

Ion measurement range : Ca range: 5 × 107 - 1 M, 0.02 - 4000 ppm
Ion measurement accuracy : ± 0.5 % F.S.
Resolution : 0.001, 0.01, 0.1, 1
Calibration points : 2 to 5 points

Compare Remove

Benchtop Ion Meter For I, LBIM-A26

Ion measurement range : I range: 1×108- 1M, 0.06 -127000 ppm
Ion measurement accuracy : ± 1 % F.S.
Resolution : 0.001, 0.01, 0.1, 1
Calibration points : 2 to 5 points

Compare Remove

Benchtop Ion Meter LBIM-B10

pH/pX Range : -2.000 to 20.000 pH/pX
mV Range : -1999.9 to 1999.9 mV
Ion Measurement : H, Na, K, Ag, Ca, Cl, F, NO3, etc.
Measurement Units : mol/L, mmol/L, g/L, mg/L, ppm, µg/L

Compare Remove

Benchtop Ion Meter For Cl LBIM-C12

Ion measurement range : Cl range: 0 to 19990 g/L
Ion measurement accuracy : 0.005
Ion measurement Resolution : 4 significant digits (expressed in scientific notation)
mV range : 1999.9 to1999.9 mV

Compare Remove

Benchtop Ion Meter For NH LBIM-C17

Ion measurement range : NH range: 0 to 19990 g/L
Ion measurement accuracy : 0.005
Ion measurement resolution : 4 significant digits (expressed in scientific notation)
mV range : 1999.9 to 1999.9 mV

Compare Remove

Benchtop Ion Meter For I LBIM-C19

Ion measurement range : I range: 0 to 19990 g/L
Ion measurement accuracy : 0.005
Ion measurement resolution : 4 significant digits (expressed in scientific notation)
mV range : 1999.9 to 1999.9 mV

Compare Remove

Labtron Benchtop Ion meter for Cu is designed to measure cupric ion concentrations in a wide range of water types. It can be effectively used with potable water, distilled or deionized water, wastewater, and natural water sources like rivers or lakes. This makes it highly suitable for environmental monitoring, laboratory testing, and industrial water quality analysis. It has wide detection range ensuring accurate results in both low and high concentration samples.
The Benchtop Ion meter for Cu's auto hold function automatically locks the reading once the measurement stabilizes. This helps users avoid recording fluctuating data and makes it easier to note or document precise results. It is useful in research laboratory settings or when multiple samples are being tested. This function also reduces the chances of human error during manual data logging.
Labtron's Benchtop Ion meter for Cu includes a calibration due reminder that alerts users when recalibration is needed to ensure safe and consistent operation. It also performs automatic electrode diagnostics to check the slope of the sensor and monitor its health. These features prevent inaccurate readings caused by electrode degradation. Regular prompts and diagnostics promote timely maintenance and calibration for long-term accuracy.
The Benchtop Ion meter for Cu allows users to check electrode performance using the mV measurement mode. This helps identify if the electrode's response is weakening or drifting from expected values. Users can detect when the electrode may need cleaning or replacement by evaluating the slope. Regular monitoring like this extends the life of the electrode and ensures reliable measurements.
Yes, our Benchtop Ion meter for Cu is designed with a large LCD screen for effective monitoring. It features a smart system menu with eight adjustable parameters, such as calibration points and stability settings. The direct ion concentration readout simplifies the process, so even users without technical knowledge can operate it confidently. It offers both manual and automatic modes of shutdown and temperature compensation to suit different skill levels.
Yes, the Benchtop Ion meter for Cu includes built-in memory that can store up to 500 sets of data. Each entry is time-stamped using a real-time clock, making it ideal for regulatory compliance and recordkeeping. The USB interface allows quick data transfer to a computer for further analysis or reporting. This ensures efficient workflow in labs, research institutions, and quality control departments.