Benchtop Ion meter for Ca, LBIM-A13

Name: Benchtop Ion meter for Ca, LBIM-A13
Brand: Labtron
SKU: LBIM-A13
Rating: 4.9 (794 reviews)

Benchtop Ion meter for Ca, LBIM-A13 comes with (Ca) calcium ion selective electrode for calcium ion concentration measurement. This Ion meter comes with ± 0.5 % F.S. measurement accuracy. The direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Request Quote

Ion measurement range	Ca range: 5 × 10⁷ - 1 M, 0.02 - 4000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Benchtop Ion meter is used to measure the calcium ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Ca calcium Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter

Ion selective electrode: Ca range: 0.02 - 4000 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor

Download catalog for
Benchtop Ion meter for Ca, LBIM-A13

Available Range :

Benchtop Ion Meter for NO LBIM-C15 : pH/ISE/Temp. (mV/pX) Benchtop Ion Meter for Na LBIM-C11 : Na range: 0 to 19990 g/L Benchtop Ion Meter for Cu LBIM-C18 : Cu range: 0 to 19990 g/L Benchtop Ion Meter for I LBIM-C19 : I range: 0 to 19990 g/L Benchtop Ion Meter for NH LBIM-C17 : NH range: 0 to 19990 g/L Benchtop Ion Meter for K LBIM-C16 : K range: 0 to 19990 g/L