What kind of gases can be used with the Automatic COC Flash Point & Fire Point Tester LOFP-B11 for ignition?

The Automatic COC Flash Point & Fire Point Tester LOFP-B11 supports multiple gas types for ignition, including liquefied petroleum gas (LPG), butane, natural gas, and pipeline gas. The recommended gas supply pressure should be below 10?kPa. Using clean and dry gas ensures proper ignition flame generation and consistent performance. It's important to inspect the gas line and safety valve connections before starting each test.

How does barometric pressure correction in the Automatic COC Flash Point & Fire Point Tester LOFP-B11 improve accuracy?

Our Automatic COC Flash Point & Fire Point Tester LOFP-B11 includes automatic barometric pressure correction to ensure accurate flash point results. Atmospheric pressure can impact test outcomes, especially in locations with high altitude or fluctuating weather. This feature adjusts the measured value to standard pressure conditions. It helps improve result consistency and reliability across different environments, which is crucial in regulatory and quality testing.

Can the Automatic COC Flash Point & Fire Point Tester LOFP-B11 handle unknown or mixed samples?

The Automatic COC Flash Point & Fire Point Tester LOFP-B11 includes a “search mode” specifically for estimating the flash point of unknown samples. This mode helps identify an approximate flash point range when the composition is not clearly defined. However, if the sample contains multiple volatile components, results may be inconsistent. For critical testing, it’s best to know the sample content and confirm it’s safe for high-temperature analysis.

Can I run multiple tests in a row on the Automatic COC Flash Point & Fire Point Tester LOFP-B11 without letting it cool down?

Labtron’s Automatic COC Flash Point & Fire Point Tester LOFP-B11 can perform consecutive tests, but allowing brief cooling between runs improves test consistency and equipment safety. The unit's built-in air-cooling system reduces waiting time by cooling internal components efficiently. This is especially important for low flash point samples to avoid thermal interference. Always wait for the unit’s readiness prompt before starting the next test.

How do I know if the igniter on the Automatic COC Flash Point & Fire Point Tester LOFP-B11 needs to be replaced?

Our Automatic COC Flash Point & Fire Point Tester LOFP-B11 provides ignition fault alerts if the igniter is not functioning properly. Signs of wear include frequent ignition failures, delayed ignition, or weak flame response. Users can visually inspect the igniter for carbon buildup, corrosion, or damage. If replacement is needed, the igniter is designed to be easily unplugged and replaced according to the user manual.

Automatic COC Flash Point & Fire Point Tester LOFP-B11

Name: Automatic COC Flash Point & Fire Point Tester LOFP-B11
Brand: Labtron
SKU: LOFP-B11
Rating: 4.9 (913 reviews)

Automatic COC Flash Point & Fire Point Tester LOFP-B11 measures ignition of liquid vapor and its burning temperature from 79℃ to 370℃. It features fast heating and cooling cycles enhance testing efficiency for accurate results. Integrated with pluggable igniter for convenient and easy replacement. Built-in safety mechanism protects operators during hazardous condition. Our Tester is ideal for research, quality control, and production monitoring.

Request Quote

Measuring Range	79 to 370℃ (175 to 698℉)
Resolution	0.1℃
Repeatability	≤ 6℃
Reproducibility	≤ 8℃
Gas Supply	LP gas, butane gas, pipeline gas, or natural gas (pressure < 10kPa)
Cooling	Air cooling
Ignition Source	Gas ignition with automatic lighting
Flash Point Detection	Ionization Ring
Temperature Sensor	PT100 probe
User Interface	7
Supported Languages	Chinese, English, Russian
Barometric Correction	Flash point corrected to barometric pressure
Data Storage	No less than 5000 results
Standards	ASTM D92, ISO 2592, IP 36, GB/T 3536
I/O Ports	RS232, RJ-45
Safety Features	Automatic shutdown, alarm, and cooling under: Flash Point Mode: EFP + 20℃ Flash & Fire Mode: EFP + 50℃ Overheating: 400℃
Data Export	LIMS or Printer
Machine Power	900W
Heater Power	800W
Operating Conditions	5℃ to 35℃
Relative Humidity	20 to 90% , 35℃ (non-condensing), no airflow
Power Supply	AC 220V ± 10%, 50/60Hz
Dimensions (W x D x H)	530mm x 233mm x 427mm
Weight	19 Kg

Detachable ionization ring for cleaning
Real-time display of test progress
Pre-programmed method for Flash, Fire and Searching
Barometric correction for temperature calibration
Data storage for over 5000 results

Our Automatic COC Flash Point & Fire Point Tester is essential for accurately determining flammability of liquids in petroleum and chemical industries. It enhances safety and compliance in storage, transportation and quality control processes.

Download catalog for
Automatic COC Flash Point & Fire Point Tester LOFP-B11 Catalog

Models of Open Cup Flash Point Tester

Labtron Open Cup Flash Point Tester features adjustable heating power for precise control over temperature settings, with an electric current meter to display power consumption. These include menu prompts and guided input functions, simplifying the setup process for users. Their electric ignition mode ensures a reliable start-up for smooth operation. They have a detachable ionization ring for easy cleaning, maintenance, and longevity. Our open cup flash point tester has a barometric correction for temperature calibration, ensuring accurate readings and accounting for atmospheric pressure variations.

Automatic COC Flash & Fire Point Tester LOFP-B10

Ambient Temperature : 15 ℃ ~ 35 ℃
Relative Humidity : ≤ 85 %
Temperature Measurement- Full Scale : Ambient temperature to ~ 400 ℃
Temperature Measurement- Repeatability : ≤ 4 ℃

Compare Remove

Automatic Cleveland Open Cup Flash Point Tester LOFP-A12

Ambient Temperature : 10 ℃ to 40 °C
Relative Humidity : ≤ 80 %
Temperature Measurement- Full Scale : Ambient temperature to 300 °C
Temperature Measurement- Repeatability : ≤ 8 °C

Compare Remove

Cleveland Open Cup Flash Point Tester LOFP-A11

Temperature Measurement Range : Room Temperature to 400℃
Repeatability : Flash Point ≤150℃: ±2℃ Flash Point ≥150℃: ±3℃
Resolution : 0.1℃
Precision : 0.5%

Compare Remove

Open Cup Flash Point Tester LOFP-A10

Thermometer : 0 ℃ ~ 360 °C
Scale Division : 1 °C
Ambient Temperature : ≤ 35 °C
Relative Humidity : ≤ 85 %

Compare Remove

Automatic COC Flash Point & Fire Point Tester LOFP-B11 FAQ's

The Automatic COC Flash Point & Fire Point Tester LOFP-B11 supports multiple gas types for ignition, including liquefied petroleum gas (LPG), butane, natural gas, and pipeline gas. The recommended gas supply pressure should be below 10?kPa. Using clean and dry gas ensures proper ignition flame generation and consistent performance. It's important to inspect the gas line and safety valve connections before starting each test.
Our Automatic COC Flash Point & Fire Point Tester LOFP-B11 includes automatic barometric pressure correction to ensure accurate flash point results. Atmospheric pressure can impact test outcomes, especially in locations with high altitude or fluctuating weather. This feature adjusts the measured value to standard pressure conditions. It helps improve result consistency and reliability across different environments, which is crucial in regulatory and quality testing.
The Automatic COC Flash Point & Fire Point Tester LOFP-B11 includes a “search mode” specifically for estimating the flash point of unknown samples. This mode helps identify an approximate flash point range when the composition is not clearly defined. However, if the sample contains multiple volatile components, results may be inconsistent. For critical testing, it’s best to know the sample content and confirm it’s safe for high-temperature analysis.
Labtron’s Automatic COC Flash Point & Fire Point Tester LOFP-B11 can perform consecutive tests, but allowing brief cooling between runs improves test consistency and equipment safety. The unit's built-in air-cooling system reduces waiting time by cooling internal components efficiently. This is especially important for low flash point samples to avoid thermal interference. Always wait for the unit’s readiness prompt before starting the next test.
Our Automatic COC Flash Point & Fire Point Tester LOFP-B11 provides ignition fault alerts if the igniter is not functioning properly. Signs of wear include frequent ignition failures, delayed ignition, or weak flame response. Users can visually inspect the igniter for carbon buildup, corrosion, or damage. If replacement is needed, the igniter is designed to be easily unplugged and replaced according to the user manual.