info@labtron.com
| Capacity | 225 L |
| Temperature Range | -20℃ to +150℃ |
| Temperature Fluctuation | ±0.5℃ |
| Temperature Uniformity | ≤2.0℃ |
| Temperature Deviation | ±2.0℃ |
| Heat-up Rate Non-linear | -20℃ to +100℃ 35 min (No-load) |
| Cool-down Rate Non-linear | +20℃ to -20℃ |
| Humidity Range | 20% R.H to 98% R.H |
| Humidity Fluctuation | ±2.0 %RH |
| Humidity Uniformity | ±3.0 %RH |
| Humidity Deviation | ±3.0 %RH (>75%RH) |
| Noise Level | ≤68 dB |
| Power Consumption | 7 kW |
| Power Supply | AC 3ψ4 W 380 V 50 Hz |
| Dimensions (W × D × H) | 600 × 750 × 500 mm |
| Exterior Dimensions (W × D × H) | 800 × 1730 × 1525 mm |
Quick recovery time
Intelligent data logging
Noise-reduced operation
Compact space efficiency
Programmable test settings
Temperature and Humidity Test Chamber LTHC-E12 is a testing device that simulates specific environmental conditions to evaluate product performance and durability. It is widely used in industries like electronics, automotive, and pharmaceuticals for quality control and research.
Download catalog for
Temperature And Humidity Test Chamber LTHC-E12 Catalog
Available Range :
Temperature and Humidity Test Chamber LTHC-B10 : 100 L Temperature and Humidity Test Chamber LTHC-B14 : 1000 L Temperature And Humidity Test Chamber LTHC-E11 : 105 L Temperature and Humidity Test Chamber LTHC-D11 : 1130L Temperature And Humidity Test Chamber LTHC-A14 : 120L Temperature and Humidity Test Chamber LTHC-C20 : 150 L Temperature and Humidity Test Chamber LTHC-B25 : 1500 L Temperature and Humidity Test Chamber LTHC-B11 : 225 L Temperature And Humidity Test Chamber LTHC-A15 : 225L Temperature and Humidity Test Chamber LTHC-A12 : 250 L Temperature And Humidity Test Chamber LTHC-J10 : 27L Temperature and Humidity Test Chamber LTHC-D10 : 300L Temperature and Humidity Test Chamber LTHC-B30 : 3150 L Temperature And Humidity Test Chamber LTHC-E13 : 408 L Temperature And Humidity Test Chamber LTHC-A10 : 50 L Temperature and Humidity Test Chamber LTHC-B12 : 500 L Temperature And Humidity Test Chamber LTHC-A16 : 504L Temperature and Humidity Test Chamber LTHC-C30 : 550L Temperature And Humidity Test Chamber LTHC-A13 : 64 L Temperature And Humidity Test Chamber LTHC-A11 : 80 L Temperature and Humidity Test Chamber LTHC-B13 : 800 L Temperature And Humidity Chamber LTHC-G10 : Total of 500L Temperature And Humidity Chamber LTHC-G11 : Total of 800LLabtron offers temperature and humidity test chambers with capacities ranging from 50 to 1130 L. They have a humidity controller and thermal-insulating material resistant to high temperatures. They feature an LCD touch screen with a corrosion-resistant interior chamber and a double-layered glass observation window. They include an independent R&D software and a compressor overload switch. Our temperature and humidity tester has built-in safety self-protection and overheating prevention.
.webp "Temperature and Humidity Test Chamber LTHC-B22")
.webp "Temperature and Humidity Test Chamber LTHC-B11")
Power requirements vary by model, but Labtron chambers typically operate on a single-phase or three-phase power supply, depending on their size and capacity.
Yes, Labtron chambers support integration with vibration test systems, UV aging chambers, and thermal cycling equipment, providing comprehensive environmental testing solutions.
Labtron Temperature and Humidity Test Chambers regulate environmental conditions using heating, cooling, humidification, and dehumidification systems to create precise temperature and humidity settings for testing.
A Temperature and Humidity Test Chamber focuses on controlled temperature and humidity variations, while a Climatic Chamber can simulate a broader range of environmental factors such as UV exposure, salt spray, and vibration.
Yes, Labtron offers customizable chambers with different sizes, temperature ranges, humidity controls, and additional features based on specific testing requirements.
Labtron chambers are built with corrosion-resistant stainless steel interiors and insulated exteriors, ensuring durability and long-term performance in extreme conditions.
To maintain accuracy, Labtron recommends calibrating sensors and controllers at least once every 6 to 12 months, depending on usage frequency and testing standards.
Yes, these chambers are widely used for stability testing in pharmaceuticals, food shelf-life analysis, and packaging material testing under controlled environmental conditions.
Post your question?
Our experts are here to help!
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
