Is it necessary to monitor the flow rate in a recirculating chiller?

Yes, monitoring the flow rate is essential for ensuring the chiller is cooling effectively. A low flow rate may indicate issues such as blockages, leaks, or pump malfunctions, which can significantly affect cooling performance and system efficiency. Regular monitoring can help identify potential problems early, preventing costly damage and downtime.

Are recirculating chillers available with a heat recovery feature?

Yes, some models of recirculating chillers come with a heat recovery feature that captures waste heat and reuses it for other purposes. This helps improve overall energy efficiency, making it especially beneficial in industrial and laboratory settings where energy savings are crucial. Additionally, this feature can contribute to reducing operational costs over time by repurposing excess heat.

Do recirculating chillers have automatic shutoff features?

Yes, many Labtron recirculating chillers are equipped with an automatic shutoff feature. This is typically triggered if the chiller reaches an unsafe temperature or detects a malfunction, helping to prevent further damage and ensuring the safety of both the chiller and connected equipment. Additionally, this feature provides peace of mind by automatically protecting the system from prolonged periods of unsafe operation.

Can one use a recirculating chiller with a water-cooled heat exchanger?

Yes, recirculating chillers are compatible with water-cooled heat exchangers. The chiller will circulates cooled liquid to the heat exchanger, helping transfer heat away from equipment and ensuring efficient cooling performance. This setup is ideal for applications where high cooling capacity is required to maintain optimal operating conditions.

What to do if the recirculating chiller is making unusual noises?

Unusual noises could indicate issues such as air bubbles in the coolant, a malfunctioning pump, or a clogged filter. Start by checking for airlocks, debris, and ensuring all components are clean and properly installed. If the issue persists after troubleshooting, it's recommended to contact technical support for further assistance.

Can one install a recirculating chiller in a confined space?

Yes, recirculating chillers can be installed in confined spaces, but it's essential to ensure adequate ventilation around the unit. Proper airflow is crucial to maintaining the chiller’s efficiency, preventing overheating, and ensuring safe operation over time. Additionally, it’s important to periodically check for any obstructions or blockages that could impair airflow.

Recirculating Chiller LRC-D14

Name: Recirculating Chiller LRC-D14
Brand: Labtron
SKU: LRC-D14
Rating: 4.9 (680 reviews)

Recirculating Chiller LRC-D14 is equipped with a 20L expansion tank and 10L fluid volume for efficient operation. Incorporates a self-contained design, eliminating the need for external systems, saving space, and reducing complexity. Offers high-efficiency pump that circulates coolant through the system at an optimal rate for consistent performance. Features a low-maintenance design, minimizing downtime, ensuring continuous operation even in demanding environments. It provides robust cooling for injection molding, laboratory experiments, and medical applications, maintain stable temperature regulation.

Request Quote

Temperature Range	-45°C to 90°C
Temperature Control	±0.05°C
Expansion Tank Volume	20L
Fluid Volume	10L Internal Circulation
Flow Control	15 to 45L/min 5bar max
Cooling Water flow	5.5m³/H at 20°C
Refrigerant	R448A
Cooling Capacity	3.3Kw at -35°C
Dimension	980mm x 430mm x 1400mm

Multiple Output Ports
Automatic Shut-Off Function
Redundant Pump System
Reliable Coolant Flow
Stable Cooling Performance

Our Recirculating Chiller offers robust cooling for injection molding, laboratory experiments, and medical cooling applications, maintaining stable temperature regulation for enhanced precision, safety, and operational efficiency.

Download catalog for
Recirculating Chiller LRC-D14 Catalog

Available Range :

Recirculating Chiller LRC-F10 : -100°C to 90°C Recirculating Chiller LRC-A12 : -20 ℃ to RT Recirculating Chiller LRC-L10 : -20°C to RT Recirculating Chiller LRC-A11 : -20℃ to RT Recirculating Chiller LRC-C10 : -25°C to 90°C Recirculating Chiller LRC-D10 : -45°C to 90°C Recirculating Chiller LRC-E10 : -80°C to 90°C Recirculating Chiller LRC-B10 : 5°C to 90°C Recirculating Chiller LRC-A10 : 5˚C to 40˚C Recirculating Chillers LRC-L11 : –20 to 25°C Recirculating Chillers LRC-L12 : –30 to 5°C

Models of Recirculating Chiller

Labtron Recirculating Chiller provide cooling of fluids from -5℃ to 40℃ by circulating them through system to remove heat. They include evaporators to absorb thermal energy from liquid ensuring temperature control. Their expansion valves control flow of refrigerant and regulate freezing capacity of system. They feature filtration system to remove particulates and impurities from solution. Our Recirculating Chiller is applicable for automotive testing, electronics, medical and pharmaceutical equipment.

Recirculating Chiller LRC-C14

Temperature Range : -25°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 20L
Fluid Volume : 10L Internal Circulation

Compare Remove

Recirculating Chiller LRC-C10

Temperature Range : -25°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 10L
Fluid Volume : 4L Internal Circulation

Compare Remove

Recirculating Chiller LRC-E11

Temperature Range : -80°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 10L
Fluid Volume : 5L Internal Circulation

Compare Remove

Recirculating Chiller LRC-C16

Temperature Range : -25°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 35L
Fluid Volume : 20L Internal Circulating

Compare Remove

Recirculating Chiller LRC-L15

Temperature Range : –30 to 5°C
Temperature Control Accuracy : ±2°C
Ambient Temperature : 5 to 35°C
Cooling Method : Air cooling

Compare Remove

Recirculating Chiller LRC-D12

Temperature Range : -45°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 15L
Fluid Volume : 6L Internal Circulation

Compare Remove

Recirculating Chiller LRC-D16

Temperature Range : -45°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 35L
Fluid Volume : 20L Internal Circulation

Compare Remove

Recirculating Chiller LRC-C15

Temperature Range : -25°C to 90°C
Temperature Control : ±0.05°C
Expansion Tank Volume : 25L
Fluid Volume : 12L Internal Circulating

Compare Remove

Recirculating Chiller LRC-D14 FAQ's

Yes, monitoring the flow rate is essential for ensuring the chiller is cooling effectively. A low flow rate may indicate issues such as blockages, leaks, or pump malfunctions, which can significantly affect cooling performance and system efficiency. Regular monitoring can help identify potential problems early, preventing costly damage and downtime.
Yes, some models of recirculating chillers come with a heat recovery feature that captures waste heat and reuses it for other purposes. This helps improve overall energy efficiency, making it especially beneficial in industrial and laboratory settings where energy savings are crucial. Additionally, this feature can contribute to reducing operational costs over time by repurposing excess heat.
Yes, many Labtron recirculating chillers are equipped with an automatic shutoff feature. This is typically triggered if the chiller reaches an unsafe temperature or detects a malfunction, helping to prevent further damage and ensuring the safety of both the chiller and connected equipment. Additionally, this feature provides peace of mind by automatically protecting the system from prolonged periods of unsafe operation.
Yes, recirculating chillers are compatible with water-cooled heat exchangers. The chiller will circulates cooled liquid to the heat exchanger, helping transfer heat away from equipment and ensuring efficient cooling performance. This setup is ideal for applications where high cooling capacity is required to maintain optimal operating conditions.
Unusual noises could indicate issues such as air bubbles in the coolant, a malfunctioning pump, or a clogged filter. Start by checking for airlocks, debris, and ensuring all components are clean and properly installed. If the issue persists after troubleshooting, it's recommended to contact technical support for further assistance.
Yes, recirculating chillers can be installed in confined spaces, but it's essential to ensure adequate ventilation around the unit. Proper airflow is crucial to maintaining the chiller’s efficiency, preventing overheating, and ensuring safe operation over time. Additionally, it’s important to periodically check for any obstructions or blockages that could impair airflow.