info@labtron.com +44 2080 043608
Portable 2 in 1 gas detector LPTG-A10

Portable 2 in 1 gas detector LPTG-A10

Portable 2 in 1 gas detector LPTG-A10 is a lightweight, hand held design gas detector. It synchronously detects concentration of CO2 gas and that of another gas like O2, CO, NH3, and H2S. LCD display shows real time measurement values. Used in field detection of multiple gases for quality testing and research purpose.

Request Quote
Sampling method Diffusion
Sensor type CO2: solid electrolyte sensor, O2:electrochemical sensor
Detection range CO2:0.04 to 5.00 % and O2:0.0 to 30.0 %
Detection accuracy CO2:± 30 % rdg (rdg = reading) and O2:± 3 % F.S. (F.S. = full scale)
Display resolution CO2:0.01 % and O2:0.1 %
Calibration CO2:0.04 % revise the zero point outdoors, O2:20.9 % revise the zero point outdoors
Display LCD display
Battery shelf life About 20 hours (when using alkaline dry batteries)
Operation temperature -10 to 50 °C
Operation humidity < 90 % RH (non-condensation)
Power supply #5 dry cell, 4/AC 100 to 250 V
Dimension Host Machine (W*D*H) 76 × 27 × 145 mm
Dimension Detector (W*D*H) 28 × 27 × 170 mm
Weight About 250 g (includes detector, batteries)
HS Code 9027100090
  • Equipped with two different types of sensors
  • Synchronous detection of two gases at a time
  • Long probe for narrow room
  • Small volume, Easy to carry
  • Automatic self calibration

Used in bio fuel plants, greenhouse, agriculture, construction, for on field testing of chemical gases and others.

Gas Detectors Measurement Gas Range Accuracy Response time
LPTG-A10 O2 and CO2 O2: 5 to 25 % vol  ±5%F.S  <20s
O2 and CO2 CO2: 0 to 5 % vol  ±30%rdg  <10s
LPTG-A10 SO2 and CO2 SO2: 0 to 100 ppm  ±5%F.S   <30s
SO2 and CO2 CO2: 0 to 5 % vol  ±30%rdg  <10s
LPTG-A10 CO and CO2 CO: 0 to 1000 ppm  ±5%F.S   <30s
CO and CO2 CO2: 0 to 5 % vol  ±30%rdg  <10s
LPTG-A10 H2S and CO2 H2S: 0 to 100 ppm  ±5%F.S   <30s
H2S and CO2 CO2: 0 to 5 % vol  ±30%rdg  <10s
LPTG-A10 NH3 and CO2 NH3: 0 to 30 % vol  ±5%F.S   <100s
NH3 and CO2 CO2: 0 to 5 % vol  ±30%rdg  <10s

Compare Models

Model Sampling method Sensor type Detection range Detection accuracy Display resolution Calibration Display Battery shelf life Operation temperature Operation humidity Power supply Dimension Host Machine (W*D*H) Dimension Detector (W*D*H) Weight HS Code
LEGD-A10 - - - - - - LCD dot matrix display - - - - - - 300 g -
LIGD-A10 - - - - - - OLED self-luminous with low power consumption, high brightness - -10 to 60℃ - 4.2 V, internal lithium battery power supply, 2200 mAh - - 0.7 kg 9027100090
LMGD-A10 Built-in stable flow pump, each flow pump is equipped in each independent module, pump flow is adjustable in ten steps, flow range: 0-800 mL/Min - - - - - 3.5 inch colour display, resolution 320×480 - - - - - - 3700 g -
LPSG-A30 Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. - - - - - LCD dot matrix display - - - - - - 300 g (NW), 800 g (GW) -
LPSG-A20 Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. - - - - - LCD dot matrix display - - - - - - 300 g -
LPSG-A21 Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. - - - - - LCD dot matrix display - - - - - - 300 g -
LPTG-A10 Diffusion CO2: solid electrolyte sensor, O2:electrochemical sensor CO2:0.04 to 5.00 % and O2:0.0 to 30.0 % CO2:± 30 % rdg (rdg = reading) and O2:± 3 % F.S. (F.S. = full scale) CO2:0.01 % and O2:0.1 % CO2:0.04 % revise the zero point outdoors, O2:20.9 % revise the zero point outdoors LCD display About 20 hours (when using alkaline dry batteries) -10 to 50 °C < 90 % RH (non-condensation) #5 dry cell, 4/AC 100 to 250 V 76 × 27 × 145 mm 28 × 27 × 170 mm About 250 g (includes detector, batteries) 9027100090
LPSG-A10 Diffusion - - - - - LCD display - - - Rechargeable lithium battery, continuous working up to 24 hours - - 105 g 9027100090
LPMG-A10 - - - - - - - - - - Lithium battery (DC 3.7V, 2400mAh) - - - 9027100090
LNGD-A10 Built-in pumping sampling, selected high-quality micro pump, low noise, low vibration, stable suction, Pump flow is adjustable in ten speeds, flow range: 0 to 500 ml/min - - - - - 3.5-inch IPS color LCD display, resolution 320 × 480 - - - - - - 400 g -
LEGD-A11 - - - - - - LCD dot matrix display - - - - - - 2 Kg -
LPVG-A10 - - - - - - Dot Matrix Liquid crystal display - - - - - - - -
LPTG-A11 Built-in pump - - ≤ ± 3% F. S - - - - - - DC 3.6 V - - 300 g -
LPHG-A10 - - - - 320 × 480 - 3.5-inch color display - - - - - - 400 g -

Most Viewed

Customer Enquiry Form

Ask Expert

Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608

Copyright © 2023 Labtron Equipment Ltd. All rights reserved.