info@labtron.com +44 2080 043608
Handheld C2H4 Ethylene Gas Detector LEGD-A10

Handheld C2H4 Ethylene Gas Detector LEGD-A10

Handheld C2H4 Ethylene Gas Detector LEGD-A10 is a portable device with built-in sampling pump having a flow rate of 1 L/min. It meets IP-66 standards which makes it suitable for use in harsh environmental conditions. Rapid speed of sampling, high flow rate, least detection time, compact design, plastic housing, storage space, etc. are some of the features which ensures accurate results in few minutes. It is used in chemical industry, food industry, etc.

Request Quote
Sampling With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection
Gas Ethylene C2H4
Measure Range 0 to 1000 ppm
Resolution 1ppm
Precision 3 to 10% F.S.
Response Time ≤ 10 s
Repeatability ≤ ± 1%
Zero Shift ≤ ± 1%(F.S./year)
Display LCD dot matrix display
Temperature -20°C to 50°C
Humidity 0 to 95 % RH
Degree of Protection IP-66
Alarm Sound, light, vibration
Recovery Time ≤ 10 s
Linearity Error ≤ ± 1%
Gas Unit Units are switchable
Battery 3.6 V 2300 mAh lithium polymer rechargeable battery
operate time is about 12 h continuously
charging time: 4 to 6 h
Operating Time 100 h (pump off)
Dimensions 205×75×32 mm
Weight 300 g
  • Highly precise sensors for accurate detection
  • Water-proof, dust-proof, explosion-proof
  • Response in less than 30s
  • Options for units between ppm and mg/m3
  • Automatic calibration mode
  • Restore factory setting option
  • Audio, visual alarm system
  • Threshold values for alarm can be set
  • 100000 sets can be stored and also re-viewed
  • Data transfer through USB (optional)
  • Long working hours and rechargeable battery
  • Dense plastic housing
  • Compact size and easy to use
  • Aluminium case to carry the device

It is used to detect ethylene gas. Extensively used in brewing and fermentation industry, cold storage places, agricultural research, chemical labs, paper making industry, bio-pharmaceutical plant etc.

Data Logger

Compare Models

Model Sampling Gas Measure Range Resolution Precision Response Time Repeatability Zero Shift Display Temperature Humidity Degree of Protection Alarm Recovery Time Linearity Error Gas Unit Battery Operating Time Dimensions Weight
LEGD-A10 With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection Ethylene C2H4 0 to 1000 ppm 1ppm 3 to 10% F.S. ≤ 10 s ≤ ± 1% ≤ ± 1%(F.S./year) LCD dot matrix display -20°C to 50°C 0 to 95 % RH IP-66 Sound, light, vibration ≤ 10 s ≤ ± 1% Units are switchable 3.6 V 2300 mAh lithium polymer rechargeable battery
operate time is about 12 h continuously
charging time: 4 to 6 h
100 h (pump off) 205×75×32 mm 300 g
LIGD-A10 - - - - - - - - OLED self-luminous with low power consumption, high brightness - - - - - - - - - - 0.7 kg
LMGD-A10 - - - O2: 0.01% VOL, CH4: 1 PPM, CO2:1 PPM VOC:1 PPM, CO:0.1 PPM, H2S: 0.1 PPM SO2: 0.01 PPM, CL2: 0.01 PPM, NO2: 0.01 PPM, NH3:0.01 PPM 2% FS ≤ 10S ≤ ± 1% - 3.5 inch colour display, resolution 320×480 - - - - ≤ 10S - - - - - 3700 g
LPSG-A30 - - - 0.001ppm (0-10ppm), 0.01ppm (0-50ppm,0-100ppm), 0.1ppm (0-500ppm), 1ppm (0-1000ppm) 1 % fs - ≤ ± 1 % - LCD dot matrix display -40° C to 70 °C 0 to 95 % RH - - - - - - - - 300 g (NW), 800 g (GW)
LPSG-A20 - - - 1 ppm 2 % fs - ≤ ± 1 % - LCD dot matrix display -20° C to 50 °C 0 to 95 % RH - - - - - - - - 300 g
LPSG-A21 - - - 1 ppm 2 % fs - ≤ ± 1 % - LCD dot matrix display -20° C to 50 °C 0 to 95 % RH - - - - - - - - 300 g
LPTG-A10 - - - - - - - - LCD display - - - - - - - - - - About 250 g (includes detector, batteries)
LPSG-A10 - - - - - - - - LCD display - - - - - - - 4.2 V lithium battery, 1700 mA/h - - 105 g
LPMG-A10 - - - - - - - - - - - - - - - - - - - -
LNGD-A10 - - - 0.01 % VOL ≤±2 % FS ≤ 8 S ≤ ± 1 % - 3.5-inch IPS color LCD display, resolution 320 × 480 - - - - ≤ 10 S - - - - - 400 g
LEGD-A11 With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection Ethylene C2H4 - 1 ppm 2% F.S. ≤ 10 s ≤ ± 1% ≤ ± 1%(F.S./year) LCD dot matrix display -20°C to 50°C 0 to 90 % RH IP-66 Sound, light, vibration ≤ 10 s ≤ ± 1% Units are switchable - 100 h (pump off) 340 × 240 × 140 mm 2 Kg
LPVG-A10 - - - - - - - - Dot Matrix Liquid crystal display - 15% to 95% RH - - - - - - - - -
LPTG-A11 - - - SO2 0.001PPM, CO 0.001PPM - - ≤ ± 2% - - - - - Audio and visual alarm ≤ 30 S - - 3.6 V DC, 4500 mA - - 300 g
LPHG-A10 - - 0-10%, 50%, 100%, 99.99% vol 0.01% vol 2% FS ≤ 8 seconds ≤ ± 1% - 3.5-inch color display - - - - ≤ 10 seconds - - - - - 400 g

Most Viewed

Customer Enquiry Form

Ask Expert

Address: Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom

Email: info@labtron.com Whatsapp: +44 20 8004 3587 Phone: +44 2080 043608

Copyright © 2024 Labtron Equipment Ltd. All rights reserved.