How is the Labtron’s Vertical Tensile Tester calibrated?

Calibration is done using certified standard weights or calibration equipment traceable to national metrology standards. It can be calibrated manually or through automated software prompts. It’s recommended to perform calibration annually or semi-annually depending on usage to maintain test accuracy and ensure compliance with ISO/ASTM standards.

What kind of grips or fixtures is available for the Vertical Tensile Tester?

Labtron’s Vertical Tensile Tester supports a wide range of grips including wedge grips, pneumatic grips, compression plates, peel test grips, three-point bend fixtures, and more. These accessories can be quickly mounted or changed based on the material and type of test required. Proper grip selection ensures accurate and repeatable results.

Can I conduct cyclic or fatigue tests on the Vertical Tensile Tester?

Some advanced configurations of the Vertical Tensile Tester support limited cyclic testing, such as cyclic loading or preconditioning tests. However, for high-cycle fatigue tests, a specialized fatigue testing machine is recommended. Always consult the technical specification to verify cyclic capabilities.

Does the Vertical Tensile Tester come with a safety enclosure or emergency stop?

Yes, safety is a key feature of the Labtron’s Vertical Tensile Tester. It includes emergency stop buttons, safety limit switches, overload protection, and in some cases, optional transparent enclosures to protect users during high-force tests. Operators should always follow safety guidelines and wear protective equipment when necessary.

What power supply is required for the Vertical Tensile Tester?

The Vertical Tensile Tester generally operates on a single-phase 220V AC power supply, though some larger models may require three-phase input. Power specifications can vary by region, so it's important to verify compatibility before installation. Always use a dedicated power source with grounding for best performance and safety.

Vertical Tensile Tester LVTT-C11

Name: Vertical Tensile Tester LVTT-C11
Brand: Labtron
SKU: LVTT-C11
Rating: 5 (848 reviews)

We provide Vertical Tensile Tester LVTT-C11 is built for the ability to test the tensile strength of various materials. Our tensile tester mainly measures the tensile, compression, adhesion, peeling, tearing, etc.

Request Quote

Capacity (MAX)	1KN (optional 10N~1KN force sensor)
Control Method	Full computer control mode, powerful software
Unit of Force	N, kN, gf, kgf, lbf, kP, tf(SI), tf (long)...
Unit of Length	Mm, cm, Inch, m, km, um..
Force Resolution	1/1,000,000
Accuracy	±0.1%
Stroke Resolution	1/1,000,000mm
Effective Stroke	450mm
Speed Range	0.01~500mm/min; (Customizable)
Test Space	Diameter Φ115mm
Shutdown Mode	Overload stop, emergency stop key, automatic stop for test piece destruction, automatic stop for upper and lower limit setting
Machine Power	Servo motor drive
Dimensions	40×37×95cm (W×D×H)
Machine Net Weight	28KG
Power	100W
Power Supply	220V 50~60HZ
Machine Accessories	1 USB communication cable, 1 software
Optional Accessories	Tensile jig, compression jig, etc.; (according to different test standards to buy different jigs)

Compact design
Customizable
Flexible Data output unit
Highly efficient
User-friendly

Our Vertical Tensile Tester LVTT-C11 is built for the ability to test the tensile strength of various materials like metal, rubber, plastic, leather, paper, composite materials, etc. Our tensile tester mainly measures tensile, compression, adhesion, peeling, tearing, etc.

Download catalog for
Vertical Tensile Tester LVTT-C11 Catalog

Available Range :

Vertical Tensile Tester LVTT-C11 : 1KN (optional 10N~1KN force sensor) Ring Type Adhesion Tester LRAT-A10 : 50N Vertical Tensile Tester LVTT-D11 : 5KN (10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN sensors available)

Models of Paper Testing Instruments

Labtron Paper Testing Instruments requires air supply for automatic clamping, ensuring smooth and secure operation. These provide real-time pressure curve displays, allowing users to monitor pressure changes instantly. Their over-range reset function protects the sensor by automatically adjusting it in case of excessive readings. They measure ink absorption values, useful for quality control in printing processes. Our paper testing instruments measure WH Hunter whiteness, YI yellowness, and CIE whiteness for precise color and whiteness evaluations for various applications.

Whiteness Meter LWM-A11

Incidence Angle : 45/0
Measurement Range : 0 to199.9
Whiteness Formula : Whiteness of Blue Light
Light Source : D65

Compare Remove

Tensile Stiffness Tester TP-B10

Sample (size) length : 38×70 mm
Measuring range : (1-500) mN.m (divided into 7 small ranges)
Indication error : 0.02
Test speed : (200° ± 20°)/ min

Compare Remove

Mullen burst tester TP-K10

Measurement range : 0 to 5600 kPa
Accuracy : ± 0.5 % F.S.
Compression speed : 170 ± 15 ml/min
Clamp pressure : ≥ 690 kPa

Compare Remove

Crush tester TP-L10

Measurement range : 5 to 500 N, 50 to 3000 N
Resolution : 1 N
Accuracy : ± 1 %
Variability : ≤ 1 %

Compare Remove

Vertical Tensile Tester LVTT-D11

Capacity (MAX) : 5KN (10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN sensors available)
Control Method : Full computer control mode, powerful software
Unit of Force : N, kN, gf, kgf, lbf, kP, tf(SI), tf (long)...
Unit of Length : mm, cm, Inch, m, km, um..

Compare Remove

Coefficient Of Friction Tester LCOFT-A10

Force Measuring Range : 0 to 2 N (customizable)
Accuracy : 0.5 level
Sample Thickness : Up to 2 mm (customizable)
Coefficient Measurement Range : 0.001 to 0.999

Compare Remove

Whiteness and chromaticity tester LWACT-A10

Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b
Stability : ≤ 0.1 within 30 min
Accuracy : Chromaticity co-ordinate 0.0001

Compare Remove

Standard strip cutter TP-G10

Sample width : 15 mm
Sample maximum length : 300 mm
Parallelism : ≤ 0.1 mm
Dimension : 240×520×70 mm

Compare Remove

Vertical Tensile Tester LVTT-C11 FAQ's

Calibration is done using certified standard weights or calibration equipment traceable to national metrology standards. It can be calibrated manually or through automated software prompts. It’s recommended to perform calibration annually or semi-annually depending on usage to maintain test accuracy and ensure compliance with ISO/ASTM standards.
Labtron’s Vertical Tensile Tester supports a wide range of grips including wedge grips, pneumatic grips, compression plates, peel test grips, three-point bend fixtures, and more. These accessories can be quickly mounted or changed based on the material and type of test required. Proper grip selection ensures accurate and repeatable results.
Some advanced configurations of the Vertical Tensile Tester support limited cyclic testing, such as cyclic loading or preconditioning tests. However, for high-cycle fatigue tests, a specialized fatigue testing machine is recommended. Always consult the technical specification to verify cyclic capabilities.
Yes, safety is a key feature of the Labtron’s Vertical Tensile Tester. It includes emergency stop buttons, safety limit switches, overload protection, and in some cases, optional transparent enclosures to protect users during high-force tests. Operators should always follow safety guidelines and wear protective equipment when necessary.
The Vertical Tensile Tester generally operates on a single-phase 220V AC power supply, though some larger models may require three-phase input. Power specifications can vary by region, so it's important to verify compatibility before installation. Always use a dedicated power source with grounding for best performance and safety.