Mullen Burst Tester LMBT-A11

Name: Mullen Burst Tester LMBT-A11
Brand: Labtron
SKU: LMBT-A11
Rating: 4.9 (615 reviews)

Mullen Burst Tester LMBT-A11 offers a measuring range of 250 to 5600 kPa with an indicating accuracy of ±0.5%. It is equipped with a noiseless thermal printer that eliminates the need for ink. The tester supports automatic measurement, statistical analysis, and printing for seamless data management. Its one-click test operation ensures ease of use and efficiency in testing processes. Our burst tester is a reliable choice for accurate and efficient paper testing.

Request Quote

Measuring Range	250 to 5600 kPa
Indicating Accuracy	± 0.5%
Working Environment	10 to 35℃, Humidity ≤ 85%
Resolution	1 kPa
Compression Rate	170 ±15 ml/min
Required Compressed Air	0.6 to 0.7 MPa
Air Pressure Regulating	0.4 MPa
Sealing Property of Hydraulic System	Upper limit: 1 min, Pressure drop < 10% Pmax
Sampler Up loop Diameter	31.5 ±0.05 mm
Sampler Down loop Diameter	31.5 ±0.05 mm
Power Supply	AC 220V ±10% 50Hz 100W
Dimension (L × W × H)	460 × 320 × 580 mm
Net Weight	56 kg

Automatic clamping (requires air supply)
32-bit ARM processor technology
5-inch colour touchscreen display
Real-time pressure curve display
Over-range reset for sensor protection
Supports kPa, kgf/cm², Psi units

Mullen Burst Tester LMBT-A11 is used to measure burst strength of corrugated cardboard, cardboard boxes, paper trays, and non-paper materials such as foil, film, rubber, silk, cotton, etc.

Diaphragm for Paper- 1 Piece

Dimethicone- 1 Bottle

RS232 interface and computer software- 1 Set

Download catalog for
Mullen Burst Tester LMBT-A11 Catalog

Available Range :

Tensile Stiffness Tester TP-B10 : (1-500) mN.m (divided into 7 small ranges) Paper Air Permeability Tester TP-J10 : 0 to 1000 ml/min Paper tearing tester TP-J20 : 0 to 1000 mN Paper and cardboard thickness meter TP-E21 : 0 to 20 mm Paper and cardboard thickness meter TP-E20 : 0 to 4 mm Digital Paper Thickness Tester TP-E30 : 0 to 5 mm Coefficient of friction tester TP-D10 : 0 to 5 N Carton compression tester TP-I10 : 0.1 to 10 kN Carton compression tester TP-I11 : 1 to 50 kN Electronic Tear Tester LET-A10 : 10 to 64000 mN Mullen Burst Tester LMBT-A11 : 250 to 5600 kPa Mullen Burst Tester LMBT-A10 : 50 to 1600 kPa Puncture strength tester TP-J12 : A (1 to 6) J indicating error ± 0.05 J
B (1 to 12) J indicating error ± 0.05 J
C (1 to 24) J indicating error ± 0.05 J
D (1 to 48) J indicating error ± 0.05 J
The indicating errors w.r.t measurement range of 20 to 80 % Internal Ply Bond Tester TP-J11 : A file: 20 to 500 J/m²
B file: 500 to 1000 J/m² Mullen Burst Tester LMBT-A12 : Standard: 50 to 1200 kPa (paper)
Optional: 250 to 5600 kPa (paperboard)

Paper and cardboard thickness meter TP-E21

Measuring range : 0 to 20 mm
Accuracy : 0.01 mm
Gauge : Analogue gauge display
Contact pressure (to create false weight) : 20 ± 0.5 kPa

Compare Remove

Coefficient of friction tester TP-D10

Measuring Range : 0 to 5 N
Slider Weight : 200 g ± 2 g
Resolution : 0.001 N
Test Speed : 10 to 200 mm/min

Compare Remove

Tensile Test Sample Cutter LTTSC-A10

Cutting Size : 15 × 210 mm
Sample Quantity : 10 (single layer)
Sample Thickness : Up to 1 mm
Dimensions : 290 × 270 × 280 mm

Compare Remove

Standard strip cutter TP-G10

Sample width : 15 mm
Sample maximum length : 300 mm
Parallelism : ≤ 0.1 mm
Dimension : 240×520×70 mm

Compare Remove

Whiteness and chromaticity tester LWACT-A10

Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm
Measurement mode : Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, b
Stability : ≤ 0.1 within 30 min
Accuracy : Chromaticity co-ordinate 0.0001