info@labtron.com
| Capacity (MAX) | 5KN (10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN sensors available) |
| Control Method | Full computer control mode, powerful software |
| Unit of Force | N, kN, gf, kgf, lbf, kP, tf(SI), tf (long)... |
| Unit of Length | mm, cm, Inch, m, km, um.. |
| Force Resolution | 1/1,000,000 |
| Sensor Accuracy | 3/1000,000 |
| Machine Accuracy | Level 5 |
| Stroke Resolution | 1/1,000,000 mm |
| Effective Stroke | 1300 mm |
| Speed Range | 0.01 to 500 mm/min; (Customizable) |
| Test Space Diameter | Φ140 mm |
| Shutdown Mode | Overload stop, emergency stop key, automatic stop for test piece destruction, automatic stop for upper and lower limit setting |
| Machine Power | Servo motor drive |
| Power | 400W |
| Power Supply | 220V 50 ~ 60HZ |
| Dimension | 520 × 600 × 1870 mm |
| Packaging Dimension | 600 × 670 × 2050 mm |
| Net Weight | 70 kg |
| Gross Weight | 90 kg |
USB port connection
Touch screen
Sturdy base
User-friendly
Our Vertical Tensile Tester LVTT-D13 is built for the test of tensile strength of various materials and has servo motor drive. Our tensile tester mainly measures the tensile, compression, adhesion, peeling, tearing, etc.
Strain Gauge 800mm
Pneumatic Clamps
Labtron Paper Testing Instruments requires air supply for automatic clamping, ensuring smooth and secure operation. These provide real-time pressure curve displays, allowing users to monitor pressure changes instantly. Their over-range reset function protects the sensor by automatically adjusting it in case of excessive readings. They measure ink absorption values, useful for quality control in printing processes. Our paper testing instruments measure WH Hunter whiteness, YI yellowness, and CIE whiteness for precise color and whiteness evaluations for various applications.
.webp "Tensile Stiffness Tester TP-B10")
Safety features generally include overload protection, emergency stop buttons, limit switches to prevent over-travel, and protective covers for moving parts. These features ensure operator safety and prevent damage to the machine. Additionally, some models feature auto-stop functions that halt testing when a sample break is detected or when preset force/displacement limits are exceeded.
A standard tensile test cycle may take anywhere from 30 seconds to several minutes, depending on the material, test speed, and elongation. Thin films and soft materials generally test quicker, while tougher materials may require slower speeds for accurate data capture. Test duration also depends on whether pre-load, hold time, or other conditions are part of the test protocol.
Yes, Labtron’s Vertical Tensile Tester LVTT-D13 come with USB or LAN ports that allow exporting test data to external storage or PCs. Some models have built-in memory for data storage, while others require direct connection to software installed on a computer. Exported data can include test parameters, force-extension curves, and detailed analysis reports, depending on the software used.
Yes, Labtron’s Vertical Tensile Tester LVTT-D13 is designed to accommodate a variety of sample sizes. The crosshead travel range and adjustable grips allow testing of short or long specimens. However, it is important to ensure that the sample falls within the specified length and thickness range mentioned in the technical specifications. For unusually shaped or large samples, custom fixtures may be needed.
Training covers sample preparation, machine setup, software operation, safety protocols, and data interpretation. Most manufacturers provide user manuals, video tutorials, or even on-site training. Trained operators are better equipped to troubleshoot issues and maintain test consistency.
Post your question?
Our experts are here to help!
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608