Benchtop Ion meter for NH₃ , LBIM-A20 Catalog

Overview

Benchtop Ion meter for NH₃ , LBIM-A20 comes with (NH₃ ) ammonia ion selective electrode for ammonia ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Features :

• Large LCD display
• 2 - 5 points calibration from low to high concentration
• Direct ion concentration readout for elaborate measurement process
• Selectable concentration units from ppm, mg / L, mol / L
• mV measurements to check the performance of ion selective electrode
• Temperature compensation provides accurate reading over the entire range
• Stability indicator to show current measurement status
• Calibration due reminder for regular calibration of the meter
• Auto hold function to freeze stable reading for better viewing & recording
• Automatic electrode diagnosis shows the slope of the sensor
• Reset setting function
• Expanded memory stores and recalls up to 500 readings
• Built –in real time clock stamps
• USB communication interface to transfer stored data to PC

Specifications :

Ion measurement range	NH3 range: 1 × 106 - 1 M, 0.02 - 17000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Applications :

Benchtop Ion meter is used to measure the ammonia ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Standard Accessories :

NH₃ Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter

Optional Accessories :

Ion selective electrode:NH₃ range 0.02 - 17000 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor