Benchtop Multi-parameter Water Quality Meter LMPWM-A32 Catalog

Overview

Benchtop multi-parameter water quality meter LMPWM-A32 comes with different measurement modes for quality and testing of water on different parameters. It measures pH, Conductivity, Dissolved oxygen, content from the test sample. It stores and recalls up to 500 sets of data. Calibration due reminder informs operator to calibrate the meter regularly.

Specifications :

pH Range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA ( pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point
Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/cm
Conductivity Temperature Coefficient	0.0 to 10.0% /°C
Compensation Mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference Temperature	20 or 25°C
Dissolved Oxygen Range	0.00 to 20.00 mg/L
Dissolved Oxygen Accuracy	± 0.2 mg/ L
Dissolved Oxygen Resolution	0.1/ 0.01 mg/ L, selectable
Dissolved Oxygen Calibration Points	1 or 2 Points
% Saturation Range	0.0 to 200.0% with ± 2% accuracy
Pressure Correction	60 to 112.5 kPa, 450 to 850 mmHg
Salinity Correction	0 to 50 g/ L
Temperature Range	0 to 105°C, 32 to 221°F
Temperature Accuracy	± 0.5°C
Temperature Resolution	0.1°C
Temperature Calibration Points	1 Point
Temperature Compensation Mode	Manual or Automatic
Data Hold Function	Manual or Automatic endpoint detection
Stability Criteria	Low or High
Calibration Due Alarm	1 to 31 Days
Reset Function	Yes
Memory	Stores up to 500 data sets
Output	USB interface
Connector	BNC, 6-pin mini plug
Display	LCD
Power Supply	DC 5V, AC 220 V, 50 Hz
Dimensions	210 × 188 × 60 mm
Net Weight	1.5 Kg

Features :

• • Common Features Stability indicator displays the status of current measurement
  • Auto hold function freezes stable, final readings for better viewing and recording
  • Manual temperature calibration to rectify the deviations in temperature
  • Automatic temperature compensation for accurate measured value over the entire range
  • Selectable temperature units (°C or °F) for different application requirements
  • Expanded memory stores and recalls up to 500 readings
  • Help message as an operational guide, helps users for quick access to the parameters
  • Reset function automatically resumes all the setting back to factory default options
  • Store data is transferrable into computer via USB communication interface
  • pH mode 1-5 points push button calibration to automatically identify pH buffer
  • Convenient to select pH buffer standard (USA/NIST/DIN) or custom
  • Automatic electrode slope display helps operator whether to replace the sensor
  • Conductivity mode 1-5 point for calibration with automatically identification of calibration solutions
  • Can select cell constant (0.1/1/10) and normalization temperature (20°C or 25°C)
  • TDS conversion factor, seawater, practical salinity measurements mode to meet different water quality measurement requirements
  • Linear or pure water compensation improves the measurement accuracy
  • Dissolved oxygen mode 1-2 points calibration using the air-sealed water & zero oxygen solution
  • Manual salinity & barometric pressure compensation for accurate readings