Muffle Furnace LMF-G10 is designed for high-temperature applications with a maximum design temperature of 1500 °C and a continuous working temperature of 1400 °C. It is insulated with ceramic fibre board and fire brick for excellent heat retention. The furnace uses MoSi₂ heating elements controlled by an S-type thermocouple with ±1 °C accuracy. Its programmable controller supports up to 50 steps. It has advanced functions such as auto start, waiting time display, skip step, and burst heating mode.
| Max. Temperature | 1500 °C |
| Working Temperature | 1400 °C |
| Capacity | 4.5 L |
| Heating Program | 50 steps |
| Thermal Rate | 3 °C – 20 °C |
| Heating Element | MoSi₂ (Molybdenum Disilicide) |
| Program Memories | 50 steps |
| Thermocouple Type | S Type |
| Display | 96 × 96 mm |
| Heating Element Placement | Horizontally aligned next to the side walls |
| Inner Insulation Material | Ceramic Fibre Board |
| Front Face Insulation Material | Insulating Fire Brick |
| Door Insulation Material | Ceramic Fibre Board |
| Housing Material | Steel Sheet |
| Housing Coating | Epoxy powder coating |
| Chimney | Standard without fan |
| Lockable Door Handle | Sidewards |
| Temperature Control Accuracy | ± 1 °C (may vary at low temperatures) |
| Measurement Accuracy | ± 1 °C |
| Auto Start at Certain Date | Yes |
| Show Remaining Waiting Time | Yes |
| Skip the Waiting Step | Yes |
| Burst Heating Mode | Yes |
| Max. Current | 18 A |
| Power | 4 kW |
| Inner Chamber Dimensions (L × W × H) | 200 × 150 × 150 mm |
Muffle Furnace LMF-G10 delivers precise high-temperature heating and material testing with uniform heat distribution. It is used in laboratories, research centres, metallurgy, ceramics, glasswork, and quality control applications.
| Sr. No. | Accessory |
| 1 | High Temperature Gloves |
| 2 | Tongs |
| 3 | Alumina Crucibles |
| 4 | Metal Crucibles |
| 5 | Alumina Combustion Boats |
| 6 | Ceramic pipes |
| 7 | Extra Thermocouples |
Over Temperature Limiter
Lift-up Door
Stainless Steel body
Gas Supply Connection
Open Door Sensor
Second Thermocouple
Observation Hole
PC Connection
110 V Power Supply
Inner Module: Changing inner module renews your furnace close to a brand new furnace
Door Insulation: With sheet metal holder vessel
Control Card: Easy-to-replace, pre-programmed
Power Card: Easy-to-replace
Display: 4 x 20 LCD display
Cooling Fan: 80 x 80 x 20/ 220 V fan
Chimney Fan: 40 x 40 x 10/ 5V fan
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
