Ozone Test Chamber LOC-A10 has a 100 L capacity, and a temperature control range from 0 °C to 100 °C. It features a high-accuracy PT100 temperature sensor and a silent-discharge ozone generator for precise environmental conditions. Our chamber includes centrifugal fan circulation and an electromagnetic door lock to ensure safety and efficiency. It also has an external stainless-steel humidifier for easy monitoring and reliable operation.
| Internal Capacity | 100 Liters |
| Temperature Range | 0 °C to 100 °C |
| Temperature Deviation | ± 2.0 °C |
| Humidity Range | 30 % to 98 % RH |
| Humidity Deviation | ± 2.5 % RH |
| Cooling Rate | Ambient to 0 °C within 20 min |
| Cooling System | Mechanical compression refrigeration |
| Ozone Concentration | 1 to 1000 PPHM |
| Gas Flow Rate | 12 mm/s to 16 mm/s (not controlled/displayed) |
| Gas Sensor | Ozone gas sensor |
| Ozone Generator | Silent discharge type |
| Air Circulation | Centrifugal wind fan |
| Clamps Tensile Stretch | 5 % to 35 % |
| Refrigerant | R449A |
| Heating Element | Nichrome heater |
| Connectivity | Ethernet, PC Link, USB port |
| Water Purification | Built-in purification system |
| Humidifier | External isolation, stainless steel surface evaporation type |
| Dehumidification | Evaporator |
| Temperature Sensor | PT100 Ω/MV A-class (accuracy 0.001 °C) |
| Humidity Sensor | Dry and wet bulb sensor |
| Sample Holder | Custom-made clamping strip holder |
| Door Lock | Electromagnetic lock |
| Exterior Material | Steel plate with protective coating |
| Interior Material | SUS304 stainless steel |
| Thermal Insulation | Polyurethane foam and insulation cotton |
| Safety Protection | Over-temperature, over-current, refrigerant high-pressure, water shortage, earth leakage, humidifier dry combustion |
| Power Supply | AC 380 V, 50 Hz, 3-phase |
| Internal Dimension | 500 × 500 × 400 mm |
| Overall Dimension | 1000 × 1050 × 1520 mm |
| Packing Dimension | 1250 × 1250 × 1770 mm |
| Net Weight | 260 kg |
| Gross Weight | 420 kg |
UV detector
Seamless operation
Stainless steel construction
Highly efficient ozone generator
Closed-type compressor unit
Voltage protection module
Our Ozone Test Chamber LOC-A10 is used for testing the ozone resistance of materials like rubber, plastics, and polymers. It is commonly used in research, development, and quality assurance in industries such as automotive, aerospace, and materials science.
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
