RO Water Purifier LWPUR-A11 is a system having an output capacity of 30 L/hr and a flow rate of 2 L/min. It provides both RO and ultrapure water for various laboratory needs. Advanced technology, easy installation procedure, water storage in tank (option), etc. are some of the features which ensures good water quality and required output. It finds applications in several laboratory, hospital, industrial operations.
| Output (25°C) | 30 Litres/hour |
| Flow rate | Up to 2 litres/minute (with pressure tank) |
| Pure water outlet | 1 : reverse osmosis water |
| RO water quality | Ion rejection rate: 96 to 99 % (with new RO membrane) Organics rejection rate: > 99 % (when MW > 200Dalton) Particles and bacteria rejection rate: > 99% Bacteria: < 0.1 cfu/ml (with optional 0.45+0.1 μm PES terminal filter) Particle( >0.1μm): < 1/ml (with optional 0.45 + 0.1 μm PES terminal filter) |
| Pure water quality | Desalination rate: Nearly 100 % TDS: RO water: 5 to 10 ppm Resistivity: 15-18 MΩ.cm Conductivity: 0.067 to 0.055 µs/cm Pure water outlet: RO water, deionized water |
| Purification System | Pre-treatment unit: Special spun fibre cartridge Special active carbon block cartridge Special active carbon block cartridge RO unit: 100GPD RO membrane ×2 Subsequent Unit: Mixed bed resin cartridge ×3 |
| Working Environment | Inlet Water: Tap water (TDS < 200ppm will be suggested). If inlet water TDS >200 ppm, pre-treatment is recommended. Water with higher TDS will affect the quality of outlet water and life of purification cartridge. Feed Water Requirement: For Tap water; temperature: 5 to 45℃, pressure: 1.0 to 4.0 Kgf/cm2 |
| Control System | Automatic electronic pressure sensor, automatic stop without water, automatic cutting off if pump stops, RO membrane auto flushing , automatic stop when water tank full, Guarantees 24 hr work |
| Standard configuration | Main body (Including 1 set of cartridge) + 4.0 gallon water tank + TDS/conductivity test pen |
| Power Consumption | 72 W |
| Electrical requirements | AC 110 to 240 V, 50/60 Hz |
| Dimension (L× W × H) | 410×220×420 mm |
| Weight | about 16 kg |
It is used to prepare ultra-pure and RO water. RO water is used in general biology experiments, agricultural experiments, ware washing, as an inlet for ultra-pure water etc. while ultrapure water is used in steam generators, injection water in healthcare, microanalysis, etc.
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
.webp "RO Water Purifier LWPUR-A11")