Dark Petroleum Products Sulphur Content Tester LST-A11 measures sulphur content from 7 ppm to 5% in various products using minimal standard samples. It integrates electrical, mechanical, and microprocessor components into a unified design. This tester automatically adjusts for temperature, pressure, and carbon-to-hydrogen ratio. Our dark petroleum products sulphur content tester can self-diagnose its operational status and electrical parameters. It employs a disposable Mylar film-based sample cell to prevent cross-contamination in the analysis of sulphur content in dark petroleum products.
| Measuring Range | 7ppm to 5% |
| Repeatability | ＜0.4347 (X 0.6446) |
| Reproducibility | ＜1.9182 (X 0.6446) |
| Detection Limit | 7 ppm |
| Oil Sample Quantity | 2.5 ml |
| Measurement Time | It can preset 60, 120, 240, 300, and 600s at random |
| Repeat Times | Can set 2, 3, 5, 10, and 50 at random |
| Calibration Curve Numbers | Save 9 calibration curves |
| Ambient Temperature | 5 to 40 ℃ |
| Relative Humidity | ≤85% (30 ℃ ) |
| Power Consumption | 30 W |
| Power Supply | AC 220V±20V, 50 Hz |
| Dimension | 468 × 368×136 mm |
| Weight | 13 Kg |
Dark Petroleum Products Sulphur Content Tester is employed across refineries, laboratories, and quality control departments to assess Sulphur levels in dark petroleum products like diesel and heavy fuel oil.
Sample cup (Three pieces a set) × 200 sets Sample cup film (6μm Mylar) × 200 pcs Anti-spill parts (Two pieces a set) × 1 set Multifunctional pressure shaping device (Two pieces a set) × 1 set Dust shield of leakage protection device × 1 pcs Heat-sensitive paper (57 mm in width; Φ30mm) × 3 roll Calibration sample (10 ml/a) × 12 pcs Three-wire power cord (250V/6A) × 1 pcs 3 ml Pipette × 200 pcs
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
