Temperature and Humidity Test Chamber LTHC-I10 offers a temperature range from -40℃ to +150℃ for environmental testing. It uses eco-friendly refrigerants R404A or R23 with high-quality valves and components. Its dehumidification relies on cryo-condensation via the evaporator for stable low humidity. The unit includes LED lighting and a test hole for real-time observation and easy access. Our chamber is ideal for evaluating fatigue in composites, ceramics, polymers, aiding aerospace, automotive, and construction industries.
| Capacity | 100 L |
| Temperature Range | -40℃ to +150℃ or -70℃ to +150℃ |
| Humidity Range | 20% to 98% RH |
| Temperature Fluctuation | ±0.5℃ |
| Humidity Fluctuation | ±1% RH |
| Temperature Deviation | Less than or equal to ±1℃ |
| Humidity Deviation | ±3% RH |
| Temperature Uniformity | Less than or equal to 2.0℃ (-40℃ to +150℃ range) |
| Heating Rate | more than or equal to 3℃/minute |
| Cooling Rate | more than or equal to 1℃/minute |
| Heating & Cooling Overshoot | Less than or equal to 2℃ |
| Noise Level | Less than or equal to 70 dB (A sound level) |
| Ambient Temperature | 5℃ to 35℃ |
| Relative Humidity | Less than or equal to 85% RH |
| Atmospheric Pressure | 80 kPa to 106 kPa |
| Frequency | 50 ± 0.5 Hz (60 Hz supported) |
| External Chamber | Electrostatic spraying of cold rolled steel plate |
| Inner Chamber | SUS304 stainless steel plate |
| Insulating Layer | Hard polyamine foam + ultra-fine eco-friendly glass fiber cotton |
| Observation Window | 3-layer vacuum large glass (30 × 40 cm), with electric heating anti-frost/condensation function |
| Test Hole | 50 mm or 100 mm on the left side (Standard: 1 piece) |
| Sample Racks | 2 pieces |
| Pressure Balance Port | 1/2 inch drainage shared type |
| Light | 9W LED energy-saving lamp mounted at observation window |
| Test Standards Compliance | IEC60068-2-1:2007 (Low temperature test) IEC60068-2-2:2007 (High temperature test) IEC60068-2-78:2007 (Test Cab: Steady state damp heat test method) IEC60068-2-30:2005 (Test Db: Alternating damp heat test method) |
| Power Supply | AC 220V 3KW |
| Chamber internal size | 400 x 500 x 500 mm |
| Chamber external size | 650 x 1250 x 1670 mm |
| Maximum Load Capacity | 20 kg (chamber bearing) |
| Chamber weight | 200 kg |
Our Temperature and Humidity Test Chamber tests electronic components under extreme conditions, ensuring stable performance, verifying lifespan, and supporting quality control in consumer electronics and automotive electronics industries.
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
