Temperature and Humidity Test Chamber LTHC-I11 offers 20% to 98% RH control for precise environmental simulation. Its multi-stage evaporator ensures efficient, uniform cooling across the chamber. The 7-inch LCD touch screen supports USB mouse input for convenient operation. It complies with IEC standards for high/low temperature and humidity testing. Our chamber simulates extreme environments for testing aerospace materials, ensuring durability of insulation, coatings, adhesives, and assemblies.
| Capacity | 150 L |
| Temperature Range | -40℃ to +150℃ or -70℃ to +150℃ |
| Humidity Range | 20% to 98% RH |
| Temperature Fluctuation | ±0.5℃ |
| Humidity Fluctuation | ±1% RH |
| Temperature Deviation | Less than or equal to ±1℃ |
| Humidity Deviation | ±3% RH |
| Temperature Uniformity | Less than or equal to 2.0℃ (-40℃ to +150℃ range) |
| Heating Rate | more than or equal to 3℃/minute |
| Cooling Rate | more than or equal to 1℃/minute |
| Heating & Cooling Overshoot | Less than or equal to 2℃ |
| Noise Level | Less than or equal to 70 dB (A sound level) |
| Ambient Temperature | 5℃ to 35℃ |
| Relative Humidity | Less than or equal to 85% RH |
| Atmospheric Pressure | 80 kPa to 106 kPa |
| Frequency | 50 ± 0.5 Hz (60 Hz supported) |
| External Chamber | Electrostatic spraying of cold rolled steel plate |
| Inner Chamber | SUS304 stainless steel plate |
| Insulating Layer | Hard polyamine foam + ultra-fine eco-friendly glass fiber cotton |
| Observation Window | 3-layer vacuum large glass (30 × 40 cm), with electric heating anti-frost/condensation function |
| Test Hole | 50 mm or 100 mm on the left side (Standard: 1 piece) |
| Sample Racks | 2 pieces |
| Pressure Balance Port | 1/2 inch drainage shared type |
| Light | 9W LED energy-saving lamp mounted at observation window |
| Test Standards Compliance | IEC60068-2-1:2007 (Low temperature test) IEC60068-2-2:2007 (High temperature test) IEC60068-2-78:2007 (Test Cab: Steady state damp heat test method) IEC60068-2-30:2005 (Test Db: Alternating damp heat test method) |
| Power Supply | AC 380V 4.5KW |
| Chamber internal size | 500 x 500 x 600 mm |
| Chamber external size | 750 x 1250 x 1770 mm |
| Maximum Load Capacity | 20 kg (chamber bearing) |
| Chamber weight | 260 kg |
Our Temperature and Humidity Test Chamber simulates extreme environments for testing aerospace materials, ensuring durability of insulation, coatings, adhesives, and assemblies in flight and ground operations.
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
