Potentiostat LPT-A11 supports up to 2A current output for electrochemical measurements. Its dual-channel functionality allows simultaneous measurement for enhanced productivity. Feature advanced software interface to simplify user control and data analysis procedures. Offers high-frequency impedance measurement capability improving electrolytic system characterization. Calibration-free operation saves time and ensures consistent measurement results efficiently.
| System Support | 2-, 3-, or 4-electrode system |
| Potential Control Range | ±10V |
| Current Control Range | ±2A |
| Potential Control Accuracy | 0.1%×full range ±1mV |
| Current Control Accuracy | 0.1%×full range |
| Potential Resolution | 10μV (>100Hz), 3μV (<10Hz) |
| Current Sensitivity | 1pA |
| Rise Time | <1μs (<10mA), <10μs (<2A) |
| Reference Electrode Input Impedance | 10¹²Ω |
| Current Range | 2nA to 2A, 10 ranges |
| Compliance Voltage | ±21V |
| Maximum Current Output | 2A |
| CV and LSV Scan Rate | 0.001mV to 10,000V/s |
| CA and CC Pulse Width | 0.0001 to 65,000s |
| Current Increment During Scan | 1mA at 1A/ms |
| Potential Increment During Scan | 0.076mV at 1V/ms |
| SWV Frequency | 0.001 to 100 kHz |
| DPV and NPV Pulse Width | 0.0001 to 1000s |
| AD Data Acquisition | 16-bit at 1 MHz, 20-bit at 1 kHz |
| DA Resolution | 16-bit, setup time: 1μs |
| Minimum Potential Increment in CV | 0.075mV |
| IMP Frequency | 10μHz to 1MHz |
| Low-Pass Filters | Covering 8-decade |
| Operating System | Windows 10/11 |
| Interface | USB 2.0 |
| Signal Generator - Frequency Range | 10μHz to 1MHz |
| Signal Generator - AC Amplitude | 1mV to 2500mV |
| Signal Generator - DC Bias | -10 to +10V |
| Signal Generator - Output Impedance | 50Ω |
| Signal Generator - Waveform | Sine wave, triangular wave, square wave |
| Signal Generator - Wave Distortion | <1% |
| Scanning Mode | Logarithmic/linear, increase/decrease |
| Signal Analyzer - Integral Time | Minimum: 10ms or cycle time, Max: 10⁶ cycles or 10⁵s |
| Signal Analyzer - Measurement Delay | 0 to 10⁵s |
| DC Offset Compensation - Potential Range | -10V to +10V |
| DC Offset Compensation - Current Range | -1A to +1A |
| Bandwidth | 8-decade frequency range, auto/manual setting |
| Product Dimension | 360mm × 340mm × 140mm |
| Packaging Dimension | 550mm × 400mm × 250mm |
| Net Weight | 6.5 kg |
| Packaging Weight | 9 kg |
Our Potentiostat LPT-A11 ensures accurate electrochemical analysis for research, corrosion testing, energy applications, and material characterization, offering precision and reliability in various laboratory and industrial settings.
| CS Studio Software | 1 |
| Power Cable | 1 |
| USB Cable | 1 |
| Electrode Cable | 2 |
| Dummy Cell | 1 |
| Ag/AgCl Reference Electrode | Only Ag/AgCl |
| Platinum Wire Counter Electrode | Only Pt wire |
| Glassy Carbon Working Electrode | 3mm |
| Electrochemical cell (Non-Sealed) | 250 ml |
Labtron Equipment Ltd., Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
Email: info@labtron.com Whatsapp: +44 73 4441 2688 Phone: +44 2080 043608
info@labtron.com
.webp "Potentiostat LPT-A11")